Pottery Barn Cameron Bookcases 1 Assembly Instruction

pottery barn kids

CAMERON 1 SHELF BOOKCASE

IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two adults is recommended.

PARTS INCLUDED:
(A) Top Panel – 1pc

(B) Bottom Panel – 1pc
(C) Left Side Panel – 1pc
(D) Right Side P ane l – 1 pc
(E) Back Panel – 1pc

HARDWARE INCLUDED:

(F) Allen Key – 1pc

TOOLS REQUIRED:
Philips Screwdriver (Not included)

(G) Allen Bolt ¼” x 28mm – 8pcs

(H) Spring Washer ¼” – 8pcs

(I) Flat Washer ¼” – 8pcs

PRE-ASSEMBLY:

• The illustrations provided allow for easier assembly when used in conjunction with the assembly
instructions.

• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this
will avoid damaging any parts during assembly. The shipping box provides and ideal work surface. Do not
dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.

• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting
assembly.

• Note: DO not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware of split
wood.

CARE INSTRUCTIONS:

• Dust often using a clean, soft, dry lint-free cloth.

• Blot spills imme diately, and wipe with a clean, damp, cloth.

• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered

finish.

(J) Wood Screw 3 x 15mm – 6pcs

Page 1/3

ASSEMBLY INSTRUCTIONS:

1. Connect the Bottom Panel (B) to the Left Side Panel (C) by aligning the pre-drilled holes on the cleats of
the Bottom Panel (B) to those of the Left Side Panel (C). Secure by inserting an Allen Bolts (G) through a
Spring Washer (H) and a Flat Washer (I) through the pre-drilled holes on the cleats of the Bottom Panel (B)
and into the pre-drilled holes of the Left Side Panel (C) using the Allen Key (F).

B.

F.

G.

H.
I.

C.

2. Repeat previous step with the Right Side Panel (D) and the Bottom Panel (B). Note: Ensure the slots on
the Left/Right Side Panels (C & D) and Bottom Panel (B) all align.

D.

F.

G.

H.
I.

B.

C.

3. Slide the Back Panel (E) into the slots on the Left/Right Side Panels (C & D) and Bottom Panel (B) of the
assembled piece.

E.

B.

Page 2/3