Pottery Barn Cameron Bookcase Hutch Assembly Instruction

Page1/
3
Cameron
Bookcase Hutch
PRE
-
ASSEMBLY:
For yoursafety and ease,assembly bytwoadults is recommended.
Pleasereadall instruction
s
before beginning assembly. The illustrations provided allow for easier assembly
when used in conjunctionw
ith the assembly instructions.
Remove all parts and hardware from box and lay out on a carpete
d or scratch
-
free work surface.
The shipping
box provides and ideal work surface.Do not dispose of any contents until assembly is completed to avoid
accidentally
discarding small parts or hardware.
Use the parts and hardware lists to identify and separate each of the pieces included prior to starting
assembly.
Note: DO not fully tighten
the
bolts until all parts are in place. Failure to follow these instructions
may cause
the bolts to misalign during assembly.
The use of power tools for assembly is not recommended
. Po
wer tools can damage hardware or
split wood.
HARD
WARE INCLUDED:
(J) Allen Key
1pc
(K)Long
Allen Bolt
1/4”x40mm–2pcs
(L)
Short
Allen Bolt
1/4”x28mm-1
2pcs(M) Spring Washer
–14pcs(N)Flat Washer
–14
pcs
(O) Shelf Supporter
8pcs
(P) Short Wood Screw
3x12mm
16pcs
(Q)
Medium
Wood Screw
4x19mm
–43pcs
(R)
Long
Wood Screw
4x38mm
–4pcs
(S) Half
-
Moon
Metal
Block
2pcs(T
) Square Bracket
4pcs
ASSEMBLY INSTRUCTIONS:
1.
Connectthe Left/Right Side Panels (G&F) with the Top
Rear
Rail (E) and Fixed Shelf (D).
Tofasten the
Fixed Shelf
(D)
to the Left/Right Side Panels
(G&F)
,
slide
a SpringWasher
(M)
, Flat Washer
(N)
onto a
Short Allen Bo
lt (L)
and insert
the Short Allen Bolt (L)
from cleat located under
the
Fixed Shelf
(D)
into the
pre-drilled holes on Left/Side Panels
(G&F)
.2.Align and attach the Top/Bottom Panels (A&B) to the wooden dowels located on the side panels. Slide a
SpringWash
er (M), Flat Washer (N) onto a Short Allen Bolt (L) and use the Short Allen Bolt to secure the
Top/Bottom Panels(A&B) to the side panels. (Fig. 1)
PARTS INCLUDED:
(A)
Top Panel
1pc
(B)
Bottom
Panel
–1pc
(C)
Adjustable Shelf
–2pcs(D)
Fixed She
lf–
1pc
(E)
Top
Rear
Rail–1pc
TOOLS REQUIRED:
Philips Screwdriver (N
ot included)
(F)
Right Side Panel
1pc
(G)Left Side Panel
1pc(H)
Big Back Panel
1pc(I)Small Back Panel
-
1pc
Page2/
3
3.
Uprightthe assembledunit.
S
ecure the Top Rear Rail
(E) to the Top Panel by
u
sing
(4)
Long Wood
Screws (R).
4.
Slide a Spring Washer (M), Flat Washer(N) and a Half
-
Moon
Metal Block
(S) onto a Long Allen Bolt (K).
Insertthe Long Allen Bolt from round cut
-
out located on the Top
R
ear Rail
(E)
into the pre
-
drilledhole on
the Left/Rig
ht Side Panels
securing with an Allen key (J).
E.
M.
R.
A.B.D.F.G.
E.
M.
M.
Loading...
+ 1 hidden pages