POSIFLEX Business Machines XP3300, XP3000 User Manual

XP-3000/3300 Series

Fan Free Touch Terminal

User’s Manual

Rev.: A0

FCC Notes:

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his owns expense will be
required to take whatever measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
Technology, Inc. will assume no liability for any technical inaccuracies or editorial or other errors
or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise
damages, including without limitation loss of data or profits, resulting from the furnishing,
performance, or use of this material.

This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex Technology, Inc. reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide applicative
notices and arrangement for special options utilizing this product. The user may find the most up
to date information of the hardware from: http://www.posiflex.com
or http://www.posiflexusa.com

All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of
this documentation.

or http://www.posiflex.com.tw

© Copyright Posiflex Technology, Inc. 2010

All brand and product names and trademarks are the property of their respective holders.

P/N:

15480900020

ALERT TO OUR HONORABLE CUSTOMERS:

Please always read thoroughly all the instructions and documents delivered
with the product before you do anything about it. Don’t take any premature
action before you have a full understanding of the consequences.

DAILY MAINTENANCE GUIDE

For regular cleaning of the XP systems, please use only soft haired brush or
dry soft cloth. You may use moist soft cloth to remove stains when necessary.
Apply only suitable amount of mild neutral cleaner for obstinate stains. Please
note that never use Acryl dissolving solvent or Polycarbonate dissolving
solvent. You may apply ammonia-based glass cleaner only on the screen
surface.

ABOUT THIS PRODUCT

Posiflex XP-3000/3300 series presents a whole new generation POS terminal,
which is a combination of touch screen, printer, MSR, and the most reliable
FanFree system. This integrated solution of XP-3000/3300 series not only less
cable connection, but also carrying a brilliant performance to user in order to
face the busiest situation.

XP-3000/3300 Series applies Intel Pine View CPU technology; fast speed
Ethernet as well as plenty of connects ports of USB, Serial, VGA and CR ports.
It also integrated with thermal printer, touch screen and MSR, as well as
designed with gorgeous appearance and small footprint for counter space
saving. The small and fully integrated system is suitable for many kinds of
segments, such as general retailer, hospitality and restaurant. In addition, XP­3000/3300 series terminal assist small and medium business to serve customer
effectively, speedy and precise.

 All-in-one integrated system including touch screen, thermal printer and

MSR which is the best choice of POS system with limited space.

 Integrated thermal printer with paper jams easy to fix design.
 One touch power ON/OFF design provides convenience control for

terminal and printer.

 The most reliable Fanfree structure for harsh environment.
 Support Win POSReady, Win7 and Linux environment
 Vertical type LCD panel with easy tilt angle adjustment
 Supports SSD (Solid-State Drive) Data Storage Device or HDD
 UPS function protects the system from intermittent power failure
 External power support for COM 2/3 and VGA ports.

Page 1

INTRODUCTION

1

2

3

4

5

6

7

8

9

10

11

14

15

16

17

9

12

1

2

13

PRODUCT PICTURES

Front Views

Side Views

Rear & Bottom Views

Page 2

PARTS IDENTIFICATION

1. LCD display with touch panel

2. Printed paper exit

3. LED indicator for power and printer status

4. Paper feed button

5. Power switch

6. Brightness control buttons

7. Magnetic Stripe Reader(Option)

8. LCD adjustable Holder

9. Lock/Release button for tilt angle adjust

10. Printer cover

11. Printer cover release button

12. Three screw holes in back cover for customer pole display
integration

13. Cable Exit

14. Bottom plate compression lock

15. Bottom plate tenon

16. Rubber foot with bottom plate fixing screw

17. Bottom plate

PRODUCT FEATURES

Standard Features:

Item

LCD Display (TFT
LCD Panel)
CPU Intel Pine View D-SC 1.66G, 512K Cache

VGA Port D-SUB 15Pin
DRAM Memory
Serial Port 3, DB9 X 2, RJ-45 X 1 on the I/O Plate

CR Port X1, Control 2 cash drawers
Standard USB Port 4 port on the I/O plate
Ethernet Port 10/100/1000 MB
Touch Function USB Interface
Touch Sensor 5 Wire Touch Pad
Storage device 2.5" SATA HDD or SSD HDD
Power switch On the top side

Models

XP-3012H XP-3015H XP-3312H XP-3315H

Digital 12" Digital 15" Digital 12" Digital 15"

(Single core or Dual core)

DDR-II667Mhz, Max 2GB (SO-DIMM X 1)

Page 3

Power Saving Suspension mode
Indicator LED and

Control panel
switch

Power ON/ standby, bi-color LED, Printer Error (RED),

Paper Out (RED), paper feed / power ON switch /

Brightness control buttons.

Fan-Free system Yes

OS support

Windows XP Pro, WEPOS, POSReady, Win 7, Linux

Power Supply Power adaptor, 80W Power adaptor, 120W

Printer build in 3" Thermal Printer

(60mm/sec)

3" Thermal Printer

(150mm /sec)

Printer auto cutter Yes

Maximum Paper

80mm

roller diameter

Paper thickness Less than 86µm

LCD panel tilt angle 14~55 (degree)

Table: Summary of features

Option Items:

Note: The underlined items in the following list means that option must be

set prior to shipment from the factory. The rest items can be set by the
dealers.

a) DDR2 SODIMM memory expansion up to 2GB max.
b) SATA SSD kit (SSD can’t coexist with SATA HDD in main unit).
c) Integrated upgrade kit:

 2 or 3 track & JIS-II MSR
 PD-309/309U, 2x20 LCD Customer display.
 PD-330, 2x20 LCD Customer display.
 PD-2605/2605U, 2x20 VFD Customer display.
 PD-2606, 2x20 VFD Customer display.
 PD-76X4 series, LCD 4x30 LCD pole display.

(PD-7614, PD-7624, PD-7634)

d) Integrated 2

nd

display 12”(LM/TM-2212)
e) Preload OS Windows XP Pro, WEPOS, Win 7, POS Ready or Linux
f) Wireless LAN adaptor in USB interface
g) UPS Battery.
h) RJ-45 to DB9 connector cable for COM3.

Page 4

INSTALLATION GUIDES

Hardware Power Switch and printer paper feed

The power switch located in the front bezel of main unit. It
is a pushbutton switch and controls the power on/off of the
whole system. Also, next to the power and status indicators
is the paper feed button for integrated printer.

This power switch turns the system on when pushed only. This
switch turns the system off when pushed again during power
on status. However, if the system hangs due to any reason such
as software resource conflict, a simple push on the switch in 10
sec may turn off the power.

Note: There must always be at least 10 seconds waiting before switching
on again once the system is powered off successfully.

Brightness Control

In the front bezel of main unit and next to the power
switch, there are brightness adjust push button
switches. Each single press on the + or – button
changes the LCD panel display brightness by a small
amount. When you press and hold the button the
change will keep on until release or extreme condition matched.

Indicators of power and status

There is an indicator LED module serving for
several purposes at front bezel. The relationship
between the indicator status and other conditions is
summarized in following table:

Page 5