Aura Series
PP-8000 / PP-8000L / PP-8000U
THERMAL PRINTER
USER’S MANUAL
FCC Notes: |
Rev.: A0 |
|
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference.
CE manufacturer’s Declaration of Conformity (EC Council Directive 89/336/EEC of 3 May 1989)
This product has been designed and manufactured in accordance with the International Standards EN50081-1/01.92 and EN50082-1/01.92 following the provisions of the Electro Magnetic Compatibility Directive of the European Communities as of May 1989
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens the machine. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including without limitation loss of data or profits, resulting from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Technologies, Inc. expressly disclaims any warranties, expressed, implied or statutory, including without limitation implied warranties of merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is subject to change without notice. Posiflex reserves the right to alter product designs, layouts or drivers without notification. The system integrator shall provide applicative notices and arrangement for special options utilizing this product. The user may find the most up to date information of the hardware from web sites: http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage peripheral. Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without prior express written consent from Posiflex Technologies, Inc. the publisher of this documentation.
© Copyright Posiflex Technologies, Inc. 2009
All brand and product names and trademarks are the property of their respective holders.
P/N: 19770900020 |
Part 1 |
GETTING STARTED
CONGRATULATION
You have made a very wise decision by purchasing the easy loading; low noise; high resolution; light weight; high reliability and high performance thermal printer Aura (PP-8000, PP-8000L & PP-8000U) series of Posiflex products. This series of printers has been elegantly designed for a Point-Of- Sale, kitchen & kiosk application. The PP-8000 series comply with UPOS 1.8 standards under Posiflex UPOS driver support. The manufacturer of this printer not only wishes to take this opportunity to congratulate your smart investment on buying this printer but also likes to express the wishes for your prosperous future by using it.
PRODUCT BRIEFING
The Aura PP-8000, PP-8000L & PP-8000U series printer uses thermal sensitive paper in form of a roll at a width of 80 mm (standard) or 58 mm (option). These Aura series printers serve the stand-alone desktop application as well as the application within a Posiflex integrated POS system equally perfect.
The Aura PP-8000 series support two types of interface input through different sub-codes to the model number. The interfaces are RS232 for serial interface and Centronics for parallel interface. The Aura PP-8000L series connects to a LAN port of Posiflex POS systems. The Aura PP-8000U series connects to an USB port of Posiflex POS systems and simulates a RS232 device through driver and performs thermal printing particularly designed for POS applications. The Aura PP-8000 series is already WEPOS (Windows Embedded for Point Of Service) compliant. Aura printer of different model number sub-codes utilizes different cabinet color and accessory cable and switch setting to accommodate the requirement of different interface.
The Aura PP-8000 series support a guillotine type auto cutter for paper partial cut and a manual cut mechanism. The Aura series also supports user’s company’s LOGO downloading for superior performance. It even supports some enhancement capability for reminder function to persons around. It can be used to drive a separately purchased kitchen bell for such reminder function in noisy environment. This printer also supports application in different countries of various kinds of power systems by changing the power cord to the power adaptor. It offers outstandingly high printing speed. This series make beeping sound as response to Paper End or Paper Near End signals. 20 plus code pages are supported in the standard model for application convenience.
Part 2
UNPACKING
Followings are items you may find when you carefully unpack the carton that delivers Aura series printer. If there is any discrepancy or problem, contact your dealer immediately. Be sure to save the packing materials in case the printer needs to be shipped at some point in the future.
1). The printer itself
2). Thermal paper test roll 80 mm wide
3). One piece of spacer plate
4). One of the interface cables:
a.Serial cable with 9 pin D sub Female to 9 pin D sub Male connectors for Aura PP-8000 serial model
b.Parallel cable with 25 pin D sub Male to 25 pin D sub Female connectors for Aura PP-8000 parallel model
c.No interface cable for PP-8000L
d.USB cable for Aura PP-8000U
Length of the interface cable depends on whether the order includes the power adaptor. When power adaptor is included, the interface cable is 6 ft long for stand alone application. When the power adaptor is not included in the order, the interface cable is a shorter one for integrated application in Posiflex POS system.
5). One of the power sources:
a.Power adaptor + power cord (depend on country type ordered)
b.Power supply cable (when no power adaptor and no powered USB cable ordered)
6). This User’s Manual
OPTIONS
Spill protect cover (P/N: 19770300013/6)
58 mm paper spacing plate (P/N: 19770305013/6)
Kitchen bell (Alarm type KL-100 or buzzer type KZ-200)
Language to add to standard model: Japanese Kanji, Korean, Simplified Chinese or Traditional Chinese
Wall mount kit
Part 3
PRODUCT PICTURES
Top View
Top Hood |
Paper Exit |
|
Top Cover |
||
|
||
Hood Release |
Paper Out LED |
|
|
||
Error LED |
FEED Switch |
|
Power LED |
Cutter Cover |
Front View
Bottom Cover
Power Switch
Bottom View
Rubber Foot
Wall Mount Hanging Hole
Window Plate Screw
Setup Window Plate
Rubber Foot
Part 4
Rear View
(I/O Area for PP-8000U)
(I/O Area for PP-8000) |
USB Port |
USB Adaptor |
|
Fixation Screw |
|
|
|
|
|
(I/O Area for PP-8000L) |
|
Serial Port |
|
|
Parallel Port Power Connector |
|
LAN Port |
Frame Ground Screw Peripheral Port |
Reset Pin Hole for LAN |
|
|
|
|
Spill Protect Cover
Paper Exit
INDICATORS
Power LED: green
Error LED: red (brief lit indicates printer busy)Paper Out LED: red
Part 5
QUICK START-UP
LOADING PAPER
Desk Top Application
Release Button
Pix. 1 |
Pix. 2 |
Pix. 3 |
1.Remove the spill protect cover if the option is on.
2.Press down the hood release button to release the top hood as in Pix. 1.
3.Raise the released hood wide open manually as in Pix. 2.
4.Drop the thermal paper roll inside the printer in orientation as shown in
Pix. 2.
5.Close the hood back leaving the tail of the paper roll coming out of the opening between the hood and the top cover as in Pix. 3.
6.Apply the spill protect cover while having the paper to come out of the paper exit slot of the cover if this option is used.
7.Tear off excessive paper.
When to Replace Paper
Whenever the printer gives paper out signal or a red line appears on the thermal paper, it is the proper timing for replacing the paper. Do not wait till the print engine is dragging the paper roll at the very end. Remove the leftover and replace a new paper roll as illustrated above to prevent excessive paper dust in the printer and consequently possibility for paper jam.
CONNECTING CABLES
Serial Connection
All the external connectors are in the recessed area at the rear bottom for PP-8000 series. The serial connector is a 9-PIN D sub Female connector at the right in this area. Apply the male connector of RS232 cable to this port for serial application. Please note that when serial connection is used, there must be no cable connection at the parallel port on the printer. The default protocol used in serial connection is 115,200 bps, none parity, 8 data bits, 1 stop bit. Set
Part 6
Loading...