POSIFLEX Business Machines TP-6000 User Manual

TP-6000 SERIES

USER’S MANUAL

TOUCH PANEL POS SYSTEM

Rev. : Original

SOME IMPORTANT NOTES

FCC NOTES

This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of
Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the machine is opened by any person other than
the authorized technicians. The user should consult his/her dealer for the problem happened. Warranty
voids if the user does not follow the instructions in applicatio n of this merchandise. The manufacturer
is by no means responsible for any damage or hazard caused by improper application.

ABOUT THIS MANUAL

This manual assists the user to utilize the hardware of the TP6000 series that is a member of
the POSIFLEX integrated point-of-sale terminal product family. The T P6000 is a compact point-of­sale system that gives the most user friendly human interface by providing touch panel input and
combines the performance and affordability of personal computers with the elegance and reliability of
business machine. The TP6000 also provides the built-in networking capability for easy
communication among multiple terminals in addition to the data transfer and control through back
office server.

The manufacturer of the TP6000 series heartily apologizes to the user for reserving the right to
change or to modify this manual without notice due to the rapid and constant progress and
improvement on science and technology. The user may always obtain the most up to date information
through our web sites: http://www.posiflex.com.tw

posiflexusa.com

, http://www.posiflexuk.com or http://www.

© Copyright Mustek Corp. 2000

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, pho tocopying, or
otherwise, without the prior written consent of Mustek Corp. the publisher of this documentation.

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Mustek Corp..

Other brand and product names are trademarks and registered trademarks and service marks of
their respective owners.

TABLE OF CONTENTS

BRIEF INTRODUCTION ..................................1-1

THE USER’S MANUAL ................................1-1

THE PRODUCT ....................................... 1-1

Overview .......................................1-1

Configuration ....................................1-1

Available Models ..............................1-1

Standard Features ..............................1-2

Optional Items ................................1-3

SYSTEM BOX CONTENTS ...............................2-1

MAIN UNIT & PADDLE ASSEMBLY .....................2-1

OPTIONAL DEVICES ..................................2-2

PARTS IDENTIFICATION ................................3-1

FRONT VIEW .........................................3-1

SIDE VIEWS ..........................................3-2

Right Side View .................................3-2

Left Side View ...................................3-2

REAR VIEW ..........................................3-3

REAR VIEW OF MAIN UNIT ............................ 3-3

ADJUSTABLE PADDLE ASSEMBLY ....................3-4

BOTTOM OF PADDLE ASSEMBLY .....................3-4

CONNECTORS .......................................3-4

INSTALLA TION GUIDES .................................4-1

SEPARATING MAIN UNIT ............................. 4-1

PREPARING PADDLE ASSEMBLY .....................4-2

INSTALLING UPS BATTERY ........................... 4-3

ROUTING THE CABLES ...............................4-3

i

PREPARING THE MAIN UNIT ..........................4-4

JOINING MAIN UNIT AND PADDLE .....................4-4

OPENING CABLE COVER .............................4-5

CONNECTING CABLES ...............................4-6

INSTALLING CASH DRAWERS ........................ 4-6

WALL MOUNTING ....................................4-7

LOCATION FOR INSTALLATION .......................4-7

USING THE TOUCH POS ................................5-1

APPLICATION ENVIRONMENT .........................5-1

Ventilation ......................................5-1

Operating Environment ........................... 5-1

Power Supply ...................................5-1

I/O Ports Utilization .............................. 5-1

External Monitor ................................. 5-2

Serial Port – COM1 ..............................5-2

Serial Port – COM2 ..............................5-2

POWER ON/OFF ......................................5-3

LED Indicator ...................................5-3

Hardware Switch ................................ 5-4

Software Support ................................5-4

Preset Power On Control .........................5-4

MAGNETIC STRIPE READER ..........................5-5

CASH DRAWER(S) ....................................5-5

DISPLAY RESOLUTION ...............................5-6

TOUCH PANEL .......................................5-6

TOUCH TERMINAL MANAGER .........................5-6

RS232 TOUCH MONITOR MOUSE ......................5-7

ii

BRIEF INTRODUCTION

THE USER’S MANUAL

The purpose of this manual is to guide the user in the initial installation and
general use of the Posiflex full y integrated compact touch terminal system with touch
panel input. TP6000 series is a product group of fully integrated PC based touch
terminal systems. However, this manual does not intend to explain any application
program that may be supplied with the TP6000 systems. The user should consult the
software supplier or the VAR that he purchased from for such information. The user is
encouraged to visit our web site http://www.posiflex.com.tw over the internet for
further information of our products.

THE PRODUCT

Overview

The TP6000 series is one of the most compact yet fully integrated touch
terminal systems. This series provides on top of its excellent functionality two
appearance choices for colors of the enclosure, charcoal and beige.

Configuration

AVAILABLE MODELS

TP6012P – 12.1” TFT LCD panel, PS2 interfaced touch controller

TP6012R – 12.1” TFT LCD panel, RS232 interfaced touch controller

TP6015P – 15.1” TFT LCD panel, PS2 interfaced touch controller

TP6015R – 15.1” TFT LCD panel, RS232 interfaced touch controller

The choice of color should be specified in addition to the model number
identification.

TP6000 USER’S MANUAL 1 - 1

STANDARD FEATURES

a) CPU: Celeron 366MHz up to 500 MHz

HDD: 6.4 GB or above

b) Support MS DOS, WIN98, WIN NT, WIN 2000 environment (WIN 2000

support starting June 2000)
c) Power saving support: doze or suspension mode
d) High quality 12.1” / 15.1” TFT active matrix LCD panel
e) Vertical type LCD panel with easy tilt angle adjustment from 18° to 87°
f) Height adjustment: the high / low adjustment gives 20 mm difference in

height
g) Resistor type touch panel
h) Extra long life touch panel that endures 10 million up to 35 million

touches at same spot
i) Spill proof water resistant structure allowing easy cleaning
j) Easy maintenance construction
k) Various I/O ports supported, including:

1. one PS/2 KB port

2. one PS/2 mouse port

3. 1 (for TP6012R/TP6015R) or 2 (fo r TP6012P/TP6015P) serial
ports with capability for +5V DC support

4. one parallel port

5. 5 USB ports

6. one LAN port 10/100 base T Ethernet

7. one cash drawer connectors for control over 2 cash drawers with
drawer open detection

8. one MSR connector

9. one external FDD port

10. one external VGA monitor port

11. one UPS battery connector

l) Preprogrammed timer wake up function
m) COM port MODEM ring up function
n) LAN wake up function

TP6000 USER’S MANUAL 1 - 2

o) Built-in UPS function to support the system from intermittent power

failure (battery itself is an option)

p) Accidental power off protection – The power switch is safely located at

one side, and this power switch can be defined as a “ON” switch only
through software command

q) Forced power off against system malfunction under the power switch

on/off mode

r) Touch control functions: left/right button, double click, drag & draw
s) Touch sound can be enabled/disabled or pitch adjusted by software

control

t) High resolution touch sensor: 1024 x 1024
u) DRAM memory can extend to 1GB
v) Dual display support under OS utilizing multiple display
w) VGA memory size programmable by software up to 64 MB
x) Integrated structure for optional MSR
y) Software programmable MSR parameters
z) 2 color choices: beige or charcoal

OPTIONAL ITEMS

Note: The underlined items in the following list means that option must be set

prior to shipment from the factory. The rest items can be set by the

dealers.
a) UPS battery
b) DRAM memory expansion up to 1GB
c) Integrated MSR of ISO 2 tracks or 3 tracks
d) 2 in 1 cash drawer control cable CCBLA-238
e) Preload Windows 98, WIN NT or WIN 2000 (after June 2000)
f) VFD or graphic LCD stand alone Posiflex pole display
g) Wall mount kit
h) External FDD

TP6000 USER’S MANUAL 1 - 3

TP6000 USER’S MANUAL 1 - 4

Carton

P

M

SYSTEM BOX CONTENTS

MAIN UNIT & PADDLE ASSEMBLY

Open the carton

User’s

anual

ackaging

materials

Documents for
Preloaded OS

Power
Cord

and take all the contents out together with the packaging materials.

Packaging
materials

Power
Supply
Unit

Bottom of
TP6000
System

Take out the accessories/options from the partitions in the packaging materials

and unfold the packaging materials carefully to unload the upsidedown loaded
TP6000 series touch terminal. Put this main unit & paddle assembly aside for the
whole Touch POS system installation. Collect if exist other options from the hidden
compartments in the packaging materials like external FDD.

TP6000 USER’S MANUAL 2 - 1

The COM1 terminator will be already mounted on the system unit when being

shipped. The latch key for cable cover lock will be in a bag.

OPTIONAL DEVICES

There are several options that will be mounted on/in the main system unit

either by the manufacturer if ordered. These optional devices include:

• DRAM expansion – This option includes any possibility from basic 32

MB to maximum 1 GB.

• Built in card reader – This option will be on the right edge when installed.

Selectable from two tracks (tracks 1 & 2 or tracks 2 & 3) and three tracks
(tracks 1, 2 & 3).

• UPS battery.

• COM1 terminator

• External Floppy disk drive.

•

There are also some options available to the TP6000 series and they may be

delivered in separate packing if ordered. These optional devices include:

• External customer display – Choice between PD2200 series and PD7000

series (or any other Posiflex stand alone customer display).

• POS printer – Choice among PP1000 series, PP2000 series, PP3000 series

and PP4000 series with choice between Beige and Charcoal color.

• Cash drawer(s) – Choice among CR3100 series, CR3200 series and

CR4000 series. All are provided with two color choices: Beige and
Charcoal color.

• Wall mounting kit.

• IW-2000-PSII – RS232 to PS/2 KB wedge convertor.

TP6000 USER’S MANUAL 2 - 2