POSIFLEX Business Machines MP-300 User Manual

Rev.: Original

P/N: 1971

09000

10

MOBILE THERMAL

MP-300

PRINTER

User’s Manual

FCC Notes:

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own expense will be
required to take whatever measures to correct the interference.

CE manufacturer’s Declaration of Conformity
(EC Council Directive 89/336/EEC of 3 May 1989)

This product has been designed and manufactured in accordance with the International Standards
EN50081-1/01.92 and EN50082-1/01.92 following the provisions of the Electro Magnetic
Compatibility Directive of the European Communities as of May 1989

Warranty Limits:

Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
will assume no liability for any technical inaccuracies or editorial or other errors or omissions
contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including
without limitation loss of data or profits, resulting from the furnishing, performance, or use of this
material.
This information is provided “as is” and Posiflex Technologies, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex reserves the right to alter product designs, layouts or
drivers without notification. The system integrator shall provide applicative notices and
arrangement for special options utilizing this product. The user may find the most up to date
information of the hardware from web sites: http://www.posiflex.com or
http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technologies, Inc. the publisher
of this documentation.

© Copyright Posiflex Technologies, Inc. 2008

All brand and product names and trademarks are the property of their respective holders.

Part 1

Charge Indicator (green)

Paper Exit &

Manual Cutter

Battery

GETTING STARTED

PRODUCT BRIEFING

The MP-300 series printer is a mobile thermal printer particularly
designed to cope with the operation of a Posiflex mobile terminal MT-2000
series. It uses thermal sensitive paper in form of a roll at a width of 58 mm. It
communicates with the host MT-2000 system through BlueTooth technology.
An option carry bag and an option battery charge power adaptor are available
for use with this printer.

PRODUCT PICTURES

Side Views

Service Port Battery Charge Connector

Bottom View

Dark Transparent Cover

Cover Lift Recess

Velcro Patch

Battery Lock

Paper Feed Button

Control Buttons & Indicators

Error Indicator (red)

Power Button

Power Indicator (green)

Part 2

UNPACKING

Followings are items you may find when you carefully unpack the
carton that delivers the mobile printer. If there is any discrepancy or problem,
contact your dealer immediately. Be sure to save the packing materials in
case the printer needs to be shipped at some point in the future.

1). The printer itself

2). Thermal paper test roll 58 mm wide

3). One piece of spacer plate

4). Leather carry bag

5). This User’s Manual

OPTIONS

1). Battery charge Power adaptor DC 12V 15W (depend on
country type ordered)

Part 3