POSIFLEX Business Machines LM-6200 User Manual

LM

-6200

Series

LCD Monitor

User’s Manual

Rev. Original

I. FEATURES

• Light weight and high luminance LCD

monitor for industrial and commercial use

• Application covers POS, POIS (Kiosk), factory Automation etc.

• High quality 12.1” TFT LCD panel with scaling up function for full screen

display

• Successor from earlier LM-6100 series and supports display resolution up

to 800 x 600 pixels

• Tilt and swivel adjustable construction

• Spill proof and easy maintenance structure allowing easy cleaning

FCC NOTICE

installed and used in accordance with the instructions manual, may cause interference to radio
communications. It has been tested and found to comply with limits for a Class A digital device
pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection
against interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own expense will be
required to take whatever measures to correct the interference.

WARRANTY LIMITS

than the authorized technicians. The user should consult his/her dealer for the problem happened.
Warranty voids if the user does not follow the instructions in application of this merchandise. The
manufacturer is by no means responsible for any damage or hazard caused by improper application.

ABOUT THIS MANUAL

12.1” LCD monitor of long endurance industrial standards. The LM-6212 is a stand alone monitor
for kitchen video KV series host system while LM-6201 is a upgrade kit particularly designed for
Posiflex touch terminal TP series or the kiosk system KS series.

the right to change or to modify this manual without notice due to the rapid and constant progress
and improvement on science and technology. The user may always obtain the most up to date
information through any of our web sites: http://www.posiflex.com.tw, http: //www.posiflex.com,
http://www.posiflexusa.com.

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Posiflex Inc..
Other brand and product names are trademarks and registered trademarks and service marks

of their respective owners.

This equipment generates, uses, and can radiate radio frequency energy and, if not

Warranty will terminate automatically when the machine is opened by any person other

This manual assists the user to utilize the LCD Monitor LM-6200 series. This series is a

The manufacturer of the LM-6200 series heartily apologizes to the user for reserving

 Copyright Posiflex Inc. 2006

P/N: 19050902010

Part 1

II. MODEL NUMBERS

LM-6212: 12.1” LCD Monitor w/ stand
LM-6201: 12.1” LCD Monitor w/ joining mechanism for Posiflex touch

terminals such as TP or KS series

LM-6212

LM-6201
on back of
TP or KS

III. CARTON CONTENTS

1. LCD Monitor panel unit

2. Monitor stand (for LM-6212) or joining mechanism (for LM-6201)

3. Pivot screw (1x) and pan head fixing screws (2x for LM-6201)

4. User’s Manual

5. VGA cable: 21867244100 (for LM-6212) or 21863241710 (for LM-6201)

6. Power adaptor: ASP0P042WTB001 & power cord (for LM-6212)

IV. INSTALLATION

1. Match the bottom of the panel unit into the monitor stand (for LM-6212)
or joining mechanism (for LM-6201).

LM-6212

2. Screw on the pivot screw for LM-6212. Screw on the pivot screw
through a split washer and then through a plain washer for LM-6201.

3. Fix LM-6201 to the Posiflex TP or KS terminal per instruction of the
terminal. Note that the joining mechanism of LM-6201 for slim base or
universal base of TP or KS terminals has slight styling difference from
that of earlier large base of TP-59/70/82 series and therefore cross
usage of the joining mechanism should be avoided.

4. For LM-6212, connect the end of VGA cable with the power connector
to the back of the panel unit. For LM-6201, please arrange the power to

Pivot Screw

LM-6201

Part 2

be supplied through the interface cable from the main unit and just
connect the video interface cable. Connect the other end of VGA cable
to the appropriate VGA port. The monitor will always turn ON
whenever power is made available.

Power Connector in VGA

for LM-6212

VGA Connector

Power Connector from Power

5. Adjust for best viewing tilt angle and engage the on screen display
(OSD) adjustment for best display effect whenever necessary. The
monitor will sign for “No Signal” status and go into power saving mode
in 5 seconds when there is no video signal. The display will come back
when the signal does.

V. OSD

A. OSD buttons

“OSD” button: To enter OSD setup menu, or to perform function selected in OSD

operation.

“NXT” button: To go to next option function.

“” “” button: To increase setting.
“” “” button: To decrease setting.
“” “” button: To turn the monitor power ON/OFF. The monitor can be turned

OFF only when there is video signal and can be turned ON only when there is
video signal and after the “Turn Off Panel” message vanishes. The default
status is set to ON when power is supplied unless manually turned OFF. Since
this button controls only the display power but not the display controller, please
try disconnect the power cable or the VGA cable once unfortunately the screen
display goes into a mess.

Part 3