POSIFLEX Business Machines KS-6812 User Manual

l

KS - 6812

Fan Free Touch Terminal

FCC Notes:

This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.

About This Manual:

Posiflex Technologies, Inc. has made every effort for the accuracy of the content in this
manual. However, Posiflex will assume no liability for any technical inaccuracies or
editorial or other errors or omissions contained herein, nor for direct, indirect,
incidental, consequential or otherwise damages, including without limitation loss of
data or profits, resulting from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Technologies, Inc. expressly
disclaims any warranties, expressed, implied or statutory, including without limitation
implied warranties of merchantability or fitness for particular purpose, good title and
against infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technologies, Inc. the publisher of this documentation.

© Copyright Posiflex Technologies, Inc. 2009

All brand and product names and trademarks are the property of their respective holders.

P/N: 16590900010

User’s Manual

Rev.: Origina

or http://www.posiflex.com.tw or http://www.posiflexusa.com

Part 1

ALERT TO OUR HONORABLE CUSTOMERS:

z Please always read thoroughly all the instructions and documents

delivered with the product before you do anything about it. Don’t
take any premature action before you have a full understanding of
the consequences.

z This product contains inside a Lithium battery. Please always

follow local environmental protection laws / regulations for disposal
of used batteries and always replace only with battery of same type.

DAILY MAINTENANCE GUIDE

For regular cleaning of the KS systems, please use only soft haired
brush or dry soft cloth. You may use moist soft cloth to remove stains when
necessary. Apply only proper amount of mild neutral detergent for obstinate
stains. Please note that never use Acryl dissolving solvent or Polycarbonate
dissolving solvent. You may apply ammonia-based glass cleaner only on the
screen surface.

Risk Of Explosion If Battery Is Replaced By An Incorrect Type

Dispose Of Used Batteries According To Local Regulations

CAUTION

Part 2

INTRODUCTION

PRODUCT PICTURES

Front View Rear View

1

1

2

6

3

4

5

7

8

9

Side Views

10

11

12

14

13

5

7

13

15

Bottom View Inside Base

16

17

18

19

20

PARTS IDENTIFICATION

1. Main unit

2. Touch panel / LCD panel

3. Power indicator

4. Base stand

Part 3

5. Optional side mount kit

6. HDD cover CF memory card reader

7. Hinge cover

8. Base back cover

9. Cable exit

10. Power switch

11. LCD brightness up button

12. LCD brightness down button

13. Base back cover hook

14. USB ports on left side

15. Sundries trough for pencils, paper clips etc.

16. Rubber feet with fixing screws

17. Screw holes for base mount kit

18. Oval cable passage on cast base trunk

19. Cable tie for all cables

20. Screw posts for optional HDD in base

PRODUCT FEATURES

Standard Features:

a) CPU: Intel Atom N270 1.6G FSB533 Cache512K
b) Fan free structure for harsh environment
c) Data storage device: SATA HDD 2.5” 80 GB or optional CF card

reader adaptor & CF card in main unit.

d) An advanced mini slim base design that supports storage room for

optional 2.5” SATA HDD.

e) Support WinXP Pro, WEPOS and Linux OS
f) High quality 12” TFT active matrix LCD panel XGA
g) Vertical type LCD panel with easy tilt angle adjustment from 20° to

90°

h) LCD brightness adjust buttons at side of main unit
i) Durable resistive type touch panel that endures 35 million touches min.

at same spot

j) Various I/O ports supported, including:

1. 3 serial ports with 2 in form of DB9 connectors and 1 in form of 10
pin RJ45 type modular connector. All are with capability for +5V
DC support. / +12V with conversion cable.

2. 6 standard USB ports with 2 at side and 4 in I/O area below panel

3. two internal proprietary USB ports for touch function and optional
side mount kit

4. one LAN port Ethernet 10/100/1000 Base T with LAN status
indicators on jack (green for link, orange for data transmission)

Part 4

5. one VGA port

6. one SATA data port plus one HDD power connector for optional
SATA HDD in base eSATA

7. one audio jack for stereo line output

8. one CR port capable of controlling 2 cash drawers max.

9. one 2 pin type DC 12 V power input connector

10. reserved one LPT interface through use of optional special cable in
service window

k) Built-in 1 internal 2W speaker
l) Touch control functions: left/right button, double click, drag & draw
m) Dynamic video memory technology up to 224 MB
n) Support high performance DDR2 SDRAM with maximum memory

size 2GB in two SODIMM

o) Integrated structure for side mount upgrade kit with software

programmable MSR parameters for Win XP or WEPOS

p) Accidental power off protection – The power switch located at a

recessed side of main unit is unlikely to be activated in normal
operation.

q) Preconditioned power up function – by alarm clock or COM port

MODEM ring or LAN

r) Supports power saving by suspension mode

Option Items:

Note: The underlined items in the following list means that option must be

set prior to shipment from the factory. The rest items can be set by the

dealers.
a) DDR2 SODIMM memory expansion up to 2GB max.
b) CF card reader in HDD bay (HDD in main unit will not be applicable)
c) Base installation kit for HDD
d) Integrated side mount upgrade kit:

 SD-680 with options of MSR and optical fingerprint sensor in USB

interface

e) Integrated base mount upgrade kit:

 LCD Pole display PD-309U or

 VFD Pole display PD-2605U or

f) Wireless LAN adaptor in USB interface
g) Preload OS WinXP Pro, WEPOS or Linux
h) RJ45 to DB9 serial port conversion cable (for COM 3 port)
i) Split cable for 2 cash drawer control (Part No. 21863018010)
j) LPT interface conversion cable

k) Hidden microphone

 12” LCD 2

nd

monitor LM-3112

Part 5

INSTALLATION GUIDES

CAUTION: Before any installation or cable connection to the set, please

always make certain that the system is turned off and the
external power source to the set is removed to prevent electric
hazard! Never touch any metal pin in the connectors or
circuits to avoid high voltage hazard or electrostatic discharge
damage unless the operator is well grounded. Failure to do the
above will void the product warranty!

TECHNICAL MANEUVERS

Applicable technical maneuvers in KS-6812 series include serial
COM port power supply settings, VGA port power supply setting, system
CMOS data reset, DRAM upgrades, physical access to CF memory card if the
CF card reader option is installed and installation of optional SATA HDD in
base. All these technical maneuver operations require purchase of applicable
Technical Manual from Posiflex or consultation from Posiflex authorized
dealers and should be handled only by a qualified technician.

TILTING LCD PANEL

The tilting mechanism in KS-6812 series utilizes
hinges and there is no particular skill to turn the LCD panel to
most suitable angle for either viewing or convenience in cable
connection / disconnection.

DISCONNECTING ALL CABLES

With the LCD panel turned to most backward position, the main I/O
connector area will be easily accessible at bottom side of the main unit. Please
first note orientations of every existing cable connection and then
disconnect every cable properly before any further reconfiguration of cable
connections. Please note that the click lock spring has to be pressed down prior
to pulling out the connector such as the LAN port or the CR port or the
alternate RJ45 form COM3 port. Please also note that the fixing screws have to
be loosened free prior to disconnection such as the 2 regular DB9 form COM
ports or the VGA port. Please always hold the connector head instead of
pulling on the cable wire when disconnecting any connector. Failure to do this
could damage the cable and jack that is considered as an artificial destruction.

Damages due to incorrect disconnection operation are not covered by
product warranty!

Part 6