POSIFLEX Business Machines KP-300T, KP-300 User Manual

Rev.:

B0

P/N:

198309000

30

PROGRAMMABLE KEYPAD

FCC Notes:

This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.

About This Manual:

Posiflex Technologies, Inc. has made every effort for the accuracy of the content in this
manual. However, Posiflex Technologies, Inc. will assume no liability for any technical
inaccuracies or editorial or other errors or omissions contained herein, nor for direct,
indirect, incidental, consequential or otherwise damages, including without limitation
loss of data or profits, resulting from furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Technologies, Inc. expressly
disclaims any warranties, expressed, implied or statutory, including without limitation
implied warranties of merchantability or fitness for particular purpose, good title and
against infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex Technologies, Inc. will not be responsible for any loss of data
resulting from the use, disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Technologies, Inc. 2008
All brand and product names and trademarks are the property of their respective holders.

KP-300 / KP-300T

SIDE MOUNT

USER’S MANUAL

Part 1

GENERAL DESCRIPTION

OVERVIEW

Table below indicates construction of this series of security devices.

Model KP-300 KP-300T

Application as side

mount kit to…
Programmable keypad
Magnetic stripe reader

Smart card reader

KS-6115/KS-621X/ KS-

631X series

Vertical layout

OPTIONS

Items underlined below means that this item must be installed by Posiflex
authorized distributor only and never by average user.

• Magnetic Stripe Reader (USB interface)
∗ ISO 7811 reader head for tracks 1 and 2
∗ ISO 7811 reader head for tracks 1, 2 and 3 + AAMVA + CA DMV
∗ JIS/II reader head

• Smart card reader

• Sound ports for KP-300

KS-661X/ KS-731X

Optional
Optional

series

Part 2

INSTALLATION GUIDE

UNPACKING CONTENTS

Items packed in for Qt’y

The side mount programmable keypad itself 1
Posiflex product information CD 1
Transparent key caps for single key 20
Key clip 1
Control keys (4 pcs / set) 1
Legend sheets (4 sh. / set) 1
This manual 1

Note: Utility drivers for KP-300 / KP-300T can be found in the CD or DVD

packaged or please find for latest updates by visiting driver download
page of our web site:http://www.posiflex.com.tw/DriversDownload.asp

MECHANICAL FIXATION

For the KP-300 / KP-300T to be
installed in the KS series host system, the
upgrade kit is installed to the right edge of
the LCD panel. You may find two screw
holes on back of the right side of the main
unit of KS series as circled in the right
picture. Remove these 2 screws to remove
the cover for side mount upgrade kit as arrowed in same picture. Take out the
cable inside this cover as circled in lower right picture and then connect it to
connector inside the side mount upgrade kit KP­300 / KP-300T as arrowed in same picture.

Gently arrange the excessive
length of this cable back in the
hole and use the 2 original
screws to fit KP-300 / KP-300T
back to the position originally occupied by the cover as in the
left picture. Please reserve the cover if there is chance to have
the side mount kit removed in the future.

KEYTOP LAYOUT

Keytop Replacement

The keypad in KP-300 / KP-300T is organized into 2 parts: a 4 by 4
numerical keypad area and a 4 by 6 matrix minus a 2 by 2 square recess
programmable keypad area. However, this keypad allows some layout

Part 3