CR-2200 SERIES
CASH DRAWER
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Technologies, Inc. expressly
disclaims any warranties, expressed, implied or statutory, including without limitation
implied warranties of merchantability or fitness for particular purpose, good title and
against infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technologies, Inc. the publisher of this documentation.
© Copyright Posiflex Technologies, Inc. 2007
All brand and product names and trademarks are the property of their respective holders.
USER’S MANUAL
Rev. A0
or http://www.posiflex.com.tw
P/N: 19230900030
Part 1
BRIEF INTRODUCTION
INTRODUCTION
The CR-2200 series is a flip-top type cash drawer. It provides
Aluminum alloy die cast case and wearproof stainless steel top surface with
zero externally accessible screw.
FEATURES
Flip-top design
Contemporary style with regular width of 460 mm and flat side surfaces
Rugged design with no screw to be accessed from outside
Aluminum alloy die cast case (both top and bottom covers)
Advanced electronics that extends the MTBF (Mean Time Between
Failure)
Three-position lock with automatic spring back function for maximum
cash security
Check slot with check storage underneath cash tray for non-cash or
large-bill transaction without opening drawer
2 fixed and 4 adjustable (total 6) bill compartments
1 fixed and 7 adjustable (total 8) coin compartments. Partially
adjustable in size and number by use of coin compartment separator
Provided with various interface selection including direct (printer) drive,
dedicated RS232, USB
Optional additional removable tray. Also optional tray cover with lock
WEPOS certified
2 color choices: Ivory and Black
MODEL NUMBER & INFERFACE
Model Number Interface Security Code Power Source
CR-2200 Printer drive N. A. 12/24 V Pulse / Printer
CR-2204 Dedicated RS232 N. A. 12VAC / Adaptor
CR-2205 USB USB PID 12VAC / Adaptor
Part 2
CARTON CONTENTS
1. Cash drawer pre-assembled.
2. User’s manual.
3. Separators of coin compartment: 5 pcs.
4. Key 2pcs: There is a key serial No. sticker on the cash drawer bottom
side. If user lost the key he/she can order the key according to this
number.
5. Signal Cable depend on model
a). For CR-2200: The standa rd signal cable is 21863018010 which has a 8
pin modular plug at one end to connect to the cash drawer and a 6 pin
modular plug at the other end to connect to the POS system/printer.
This cable serves for most popularly used POS equipment such as
Posiflex POS terminals, all Posiflex POS printers, most Epson POS
printers, most Star POS printers and all other compatibles. The user
may cut the 6 pin end or order the ready cut cable CCBLA-180A and
assemble this free end according to his POS printer specification if the
POS printer used applies different connection. The cable connection on.
CCBLA-180A is as below:
Wire color
Red Pin 1 Drawer open sense
Blue Pin 2 Drawer open sense return
Green Pin 7 + 24V to solenoid
Yellow Pin 8 Drawer kick pulse
b). For CR-2204: Serial signal RS232 DF9F RJ9 conversion cable
(21863259900/21863159900).
c). For CR-2205: USB cable (218632 50800/21863150800)
6. Power Source depend on model
a). For CR-2200: not applicable
b). For CR-2204: Power adapter 12VAC 1.5A
c). For CR-2205: Power adapter 12VAC 1.5A
RJ45 Function
Part 3