Posiflex IVA XT-3815 User Manual

Fanfree LCD Touch Terminal

Rev.: Original

XT-3615/3815

User’s Manual

FCC Notes:

This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when being operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his or her own expense will be required to take
whatever measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
having happened. Warranty voids if the user does not follow the instructions in
application of this merchandise. The manufacturer is by no means responsible for any
damage or hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex Technology, Inc. will assume neither liability for any technical inaccuracies or
editorial or other errors or omissions contained herein, nor that for direct, indirect,
incidental, consequential or otherwise damages, including without limitation loss of
data or profits, resulting from the furnishing, performance, or use of this material.

This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims
any warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.

The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex Technology, Inc. reserves the
right to alter product designs, layouts or drivers without notification. The system
integrator shall provide applicative notices and arrangement for special options utilizing
this product. The user may find the up-to-date information of the hardware from:
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com.

A backup of all data should be kept prior to installation of a drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.

P/N: 16780900010

1

All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technology, Inc., the publisher of this documentation.
© Copyright Posiflex Technology, Inc. 2014
All brand and product names and trademarks are the property of their respective holders.

ALERT TO OUR HONORABLE CUSTOMERS:

 Read thoroughly all the instructions and documents shipped with the

product before you do anything about it. Don’t take any premature action
before you fully understand the consequences.

 A Lithium battery is installed in this product. Please always follow local

environmental protection laws / regulations for disposal of used batteries
and always replace the used one only with a new battery of the same type.

 If you have a UPS battery installed in the product:

 Temperature above 40°C must be strictly avoided as it could cause

termination of battery life and unexpected result even if the battery
is not in work.

 Do NOT power off the system just by shutting off the AC power

leaving the battery supporting the whole system till completely
exhausted. Repeatedly using it up or improper maintenance
reduces the battery life dramatically.

 Always fully recharge the UPS battery at least once every 3

months if the battery is not connected.

 Always disconnect the UPS battery from the system if the system

is to be left OFF for more than 72 hours to prevent possible
damage. Only connect the UPS battery back right before you are
going to re-power on the system.

 Replace the UPS battery as soon as the monitoring software

indicates the battery is out of service. Attempt to recharge a dead
battery is dangerous!

 A separate battery monitor is not require d f o r this seri es.

DAILY MAINTENANCE GUIDE

For regular cleaning of the XT system, please use only soft brush or dry soft
cloth. You may use a wet soft cloth to remove stains when necessary. Apply
only proper amount of mild neutral deter gent fo r obst inate stains. Do NOT use
Acryl dissolving solvent or Polycarbonate dissolving solvent. You may apply
ammonia-based glass cleaner only on the screen surface.

Risk of explosion occurs if a wrong-type battery is used.

Dispose of used batteries according to local regulations.

CAUTION

2

Introducing the XT-3615/3815

In today’s retail and hospitality market, POS terminal is no longer
just a cold and hard business tool. It is a part of the store
decoration, a part of the store image. Each curve and detail of the
POS terminal should add something to the overall mood of the
store, to lift the shopping experience of the customers.

With a bezel-free touch screen, beautifully sculptured slim body,
sexily curved base stand, XT-3615/3815 series looks right at
home at any elegantly decorated store. And more than just good
looks, the XT series also offers ample of performance and
flexibility to satisfy the most demanding of daily POS operations.

The XT-3615/3815 series comes with the selection of two newly
designed foldable bases, the curvy slim Generation 7E Base and
the larger but practical Generation 8E Base.

The new base foldable allows the XT-3615/3815 series to be
configured into different configurations – “Flat Folded Mode”
saving the shipping package volume, “Low Profile Mode”
allowing greater interaction between cashier and the customers,
and the traditional "Full Extended Mode”. All this can be
achieved with a simple pull of the hidden lever. This one
terminal/multi-configuration concept provides unmatched
flexibility to store owners and system integrators alike.

Product Features

Standard Features

System

 CPU: Intel Bay Trail-M N2807 1.58G up to 2.16G, 1M

Cache, Dual core (for XT-3615) / Intel Bay Trail-D J1900

2.0G up to 2.42G, 2M Cache, 4 core (for XT-3815)

 Data storage device: 2.5” SATA HDD
 Support Windows POSReady 7 / Win 7 / Windows

Embedded 8.1 Industry / Linux per request

3

 Support high-performance DDR3L 1333 FSB, SO-DIMM

socket *1, 4GB (Max.) for XT-3615 (N2807) and 8GB (Max.)
for XT-3815 (J1900)

 VGA memory support DVMT 4.0

Mechanical Structure

 Fanfree structure with Aluminum die-cast main unit casing
 An advanced GEN 8E base design that supports storage

room for an optional UPS battery, power adapter, and
powered USB

 Integrated structure for side mount upgrade kit: SA-

105/205/305/405; back mount display: LM/TM-3010/3014
and PD-6307

 Water resistant structure allowing easy cleaning
Display

 High-quality 15” TFT active matrix LCD panel
 LCD panel with easy tilt angle adjustment from 15° to 90°
 LCD brightness adjust buttons at side of main unit
 Dual display support (per OS capability)

Power Source

 Preconditioned power up function – by alarm clock or

LAN

 12 VDC power adaptor, 60W / optional UPS battery

(2300mAh/12V)

I/O Interface

 4 serial ports with 3 of DB9 connectors and one of 10-pin

RJ50 type modular connectors (optional COM5/6 from
service window via converter cable). The COM1/2/3/4
connectors are supported with capability for +5V DC
through BIOS setup and +12V DC through jumper setting.

 6 USB ports on the I/O plate (USB 2.0 x 5 ,USB3.0 x 1 ),

1 USB port on the left side (USB2.0), 3 USB Header
Reserved for Internal USB Device Use

 1 LAN port 10/100/1000 Base T with LAN status indicators

on jack (green for link and orange for data transmission)

4

 1 external VGA monitor port with +12V DC support

through BIOS setting

 LED indicators for systems operation status
 1 built-in internal 2W speaker
 1 CR port capable of controlling 2 cash drawers
 One 4-pin 12V DC power input connector
 One 4-pin connector for optional UPS battery in GEN 8E

base only

Optional Features
The underlined items in the following list means that option must
be set prior to shipment from the factory. The rest of items can be
set by the dealers.

System

 DDR3L SODIMM memory expansions up to 4GB (Max.) for

XT-3615 (N2807) and 8GB (Max.) for XT-3815 (J1900) in one
SODIMM

 Preload Windows POSReady 7 / Win 7 / Windows Embedded

8.1 Industry / Linux per request

WIFI
 Wireless LAN module, through Mini PCI-E Interface

Connection Cable

 Parallel extension cable
 RJ50-to-DB9 serial port conversion cable
 Split cable for 2 cash drawer control

Base

 GEN 8E base including UPS battery and powered USB

board, and supporting 60W/80W/120W/150W power
adaptor

Integration Kit



Integrated side mount upgrade kit for SA-105 provided with
optional MSR and for SA-205 provided with iButton

 1” SATA SSD
 Powered USB kit in GEN 8E base stand, such as PU-480 or

PU-490

5

 Power adapter kits for 80W/120W/150W power adapters

Package Contents

Before you begin operating yourXT-3615 or XT-3815 series,
please make sure that the following materials are enclosed:

 XT-3615 or XT-3815 terminal with base stand x 1
 Power adaptor x 1
 Power cord x 1
 User manual & CD x 1
 Wall mount kit (optional) x1

Views of XT-3615/3815

Front and Rear Views of XT-3615/3815 with Gen 7E Base Stand

HDD Cover

D Touch Panel

LC

Hinge
for LCD

Power Indicator

Base Stand

DDR

3 Memory Cover

Cable Exit

Neck Cover
Cable Cover

Left Side View of XT-3615/3815 with Gen 7E Base Stand

Power Button

Brightness Adjustment
Button “+”

Brightness Adjustment
Button “-”

USB 2.0 Port

Locking Hook

6