CR-4000/6000 SERIES
CASH DRAWER
USER’S MANUAL
FCC Notes:
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions manual, may cause
interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens the machine. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including without limitation loss of data or profits, resulting from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims any warranties, expressed, implied or statutory, including without limitation implied warranties of merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is subject to change without notice. Posiflex reserves the right to alter product designs, layouts or drivers without notification. The system integrator shall provide applicative notices and arrangement for special options utilizing this product. The user may find the most up to date information of the hardware from web sites: http://www.posiflex.com or http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage peripheral. Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of this documentation.
© Copyright Posiflex Technology Inc. 2011
All brand and product names and trademarks are the property of their respective holders.
P/N: 19240901050 |
Part 1 |
MODEL NUMBERS
Model |
CR400X/4015 |
CR410X/4115 |
CR421X/4225/ |
|
CR6015/621X |
||||
|
|
|
||
Bill Compartment |
5 Adjustable |
5 Fixed |
5 Fixed |
|
Bill clip |
Plastic |
Metal |
Metal |
|
Coin compartment |
9 Fixed |
9 Fixed |
5 Fixed |
|
Coin Roll storage |
1 Underneath Cash Tray |
4 Behind Cash Tray |
Note: 1. CR-4020 series is a special model having 9 bill compartments with plastic bill clip and no coin compartment
2. CR-621X series is heavy duty metal casing
INFERFACE APPLICATION
Model Number |
Interface |
Security |
Power / |
|
Code |
Source |
|||
|
|
|||
CR-4000/4020/4100/ |
Printer drive |
N. A. |
12/24 V Pulse |
|
4210/CR-6210 |
/ Printer |
|||
|
|
|||
|
|
|
|
|
CR-4001/4101/4211 |
Dedicated RS232 serial |
N. A. |
|
|
|
|
|
|
|
CR-4002/4102/4212 |
Non-dedicated RS232 |
0 ~ 255 |
12VAC / |
|
serial |
Adaptor |
|||
|
|
|||
CR-4003/4103/4213 |
Parallel |
0 ~ 255 |
|
|
|
|
|
|
|
CR-4004/4104/4214 |
Dedicated RS232 serial |
N. A. |
12VDC / PC |
|
CR-6214 |
||||
|
|
|
||
CR-4005-II/4105-II |
USB |
USB PID |
12VAC / |
|
/4215-II/ CR6215 |
Adaptor |
|||
|
|
|||
|
|
|
|
|
CR-4015/ CR-4115/ |
USB |
USB PID |
USB Port |
|
CR-4225/CR-6015 |
||||
|
|
|
||
|
|
|
|
CARTON CONTENTS
1.Cash drawer pre-assembled.
2.User’s manual.
3.Separators of bill compartment: 4 pcs (for CR4000~4, CR4005-II and CR4015 only).
4.Key 2 pcs: There is a key serial No. sticker on the cash drawer bottom plate. If user lost the key he/she can order the key according to this number.
5.Signal Cable depend on model
Part 2
a). For CR4000/4020/4100/4210/6210: The standard signal cable is 21863018010 which has a 8 pin plug at one end to connect to the cash drawer and a 6 pin plug at the other end to connect to the POS system/printer. This cable serves for most popularly used POS equipment such as all Posiflex POS terminals, all Posiflex POS printers, most Epson POS printers, most Star POS printers and all other compatibles. The user may cut the 6 pin end and assemble this free end according to his POS printer specification if the POS printer used utilizes different connection. The cable connection on the wires is as below:
Wire color |
RJ45 |
Function |
Red |
Pin 1 |
Drawer open sense |
Blue |
Pin 2 |
Drawer open sense return |
Green |
Pin 7 |
+ 24V to solenoid |
Yellow |
Pin 8 |
Drawer kick pulse |
b). For CR4001/ 4101/ 4211/ 4002/ 4102/ 4212: 21863137210 /21863237210 with one 9PM and one 9PF connector.
c). For CR4003/ 4103/ 4213: 21863231810 with one 25PM and one 25PF connector.
d). For CR4004/ 4104/ 4214/ 6214: The serial signal cable is already built on.
e). For CR-4015/ 4005-II/ 4115/ 4105-II/ 4215-II/ 4225/ 6015/ 6215: USB cable is already built on.
6.Power Source depend on model
a). For CR-4000/ 4020/ 4100/ 4210/ 6210: not applicable
b). For CR-4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/ 4213/ CR4005-II / 4105-II/ 4215-II/ 6215: Power adapter 12VAC 1.5A
c). For CR4004/ 4104/ 4214/ 6214: Power connector cable and I/O bracket plate.
d). For CR-4015/ 4115/ 4225/ 6015: There is no power adaptor needed, the power source drain from USB port directly.
Part 3