POSIFLEX CR400X, CR410X, CR421X, CR621X User's Manual

CR-4000/6000 SERIES

CASH DRAWER

FCC Notes:

This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions manual, may cause
interference to radio communications. It has been tested and found to comply with
limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which
are designed to provide reasonable protection against interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to take
whatever measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Inc. 2006
All brand and product names and trademarks are the property of their respective holders.

P/N: 19240901041

USER’S MANUAL

Rev. A2

or http://www.posiflex.com.tw

Part 1

MODEL NUMBERS

Model CR400X CR410X CR421X/ 621X
Bill Compartment
Bill clip
Coin compartment
Coin Roll storage
Note: 1. CR-4020 series is a special model having 9 bill compartments with

plastic bill clip and no coin compartment

2. CR-621X series is heavy duty metal casing

5 Adjustable 5 Fixed 5 Fixed

Plastic Metal Metal

9 Fixed 9 Fixed 5 Fixed

1 Underneath Cash Tray 4 Behind Cash Tray

INFERFACE APPLICATION

Model Number Interface

CR-4000/4020/4100/
4210/CR-6210
CR-4001/4101/4211 Dedicated RS232 serial N. A.

CR-4002/4102/4212
CR-4003/4103/4213 Parallel 0 ~ 255

CR-4004/4104/4214
CR-6214
CR-4005-II/4105-II
/4215-II/ CR- 6215

Printer drive N. A.

Non-dedicated RS232
serial

Dedicated RS232 serial N. A. 12VDC / PC

USB USB PID

Security

Code

0 ~ 255

Power /

Source

12/24 V Pulse
/ Printer

12VAC /
Adaptor

12VAC /
Adaptor

CARTON CONTENTS

1. Cash drawer pre-assembled.

2. User’s manual.

3. Separators of bill compartment: 4 pcs (for CR4000~4 and CR4005-II
only).

4. Key 2pcs: There is a key serial No. sticker on the cash drawer bottom
plate. If user lost the key he/she can order the key according to this
number.

5. Signal Cable depend on model

a). For CR4000/4020/4100/4210/6210: The standard signal cable is

21863018010 which has a 8 pin plug at one end to connect to the cash
drawer and a 6 pin plug at the other end to connect to the POS
system/printer. This cable serves for most popularly used POS
equipment such as all Posiflex POS terminals, all Posiflex POS printers,
most Epson POS printers, most Star POS printers and all other

Part 2

compatibles. The user may cut the 6 pin end and assemble this free end
according to his POS printer specification if the POS printer used
utilizes different connection. The cable connection on the wires is as
below:

Wire color

RJ45 Function

Red Pin 1 Drawer open sense
Blue Pin 2 Drawer open sense return
Green Pin 7 + 24V to solenoid
Yellow Pin 8 Drawer kick pulse

b). For CR4001/ 4101/ 4211/ 4002/ 4102/ 4212: 21863137210

/21863237210 with one 9PM and one 9PF connector.

c). For CR4003/ 4103/ 4213: 21863231810 with one 25PM and one 25PF

connector.

d). For CR4004/ 4104/ 4214/ 6214: The serial signal cable is already built

on.

e). For CR-4005-II/ 4105-II/ 4215-II/ 6215: USB cable is already built on.

6. Power Source depend on model

a). For CR-4000/ 4020/ 4100/ 4210/ 6210: not applicable
b). For CR-4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/ 4213/

CR4005-II / 4105-II/ 4215-II/ 6215: Power adapter 12VAC 1.5A

c). For CR4004/ 4104/ 4214/ 6214: Power connector cable and I/O

bracket plate.

INSTALLATION

CR4000 / 4020 / 4100 / 4210 / 6210 Connect the drawer to POS

system/printer as shown below:

Rear View

Control signal input

8P Telephone Jack

CASH DRAWER

With Printer Interface

8P Telephone Plug

Ground

POS System or Printer

Output to drawer

6P Telephone Plug

Part 3