CASH
DRAWER
n USER’S GUIDE VER. B
NOTICE
The manufacturer of the POS cash drawer makes no representation or warranties, either
expressed or implied, by or with respect to anything in this manual, and shall not be
liable for any implied warranties of fitness for a particular purpose or for any indirect,
special or consequential damages. Information in this document is subject to change
without notice and does not represent a commitment on the part of the manufacturer.
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the instructions manual, may cause interference to
radio communications. It has been tested and found to comply with the limits for a Class
A digital device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.
Models CR-3100/3200
CR-3104/3204
1
INTERFACE DESCRIPTION
. CR3100/3200 is a dumb cash drawer, which must be driven by POS printer or Posiflex
POS system.
. CR3104/3204 is a dedicated low cost RS232 cash drawer, which can be directly driven by
RS232 signal.
FEATURES
. Rugged design with reinforced heavy gauge steel construction
. Large ball bearings riding on special guides for remarkably smooth drawer slide
. Contemporary style
. Advanced electronics that extend the MTBF (Mean Time Between Failure)
. Precision mechanical parts with tight tolerance to assure wobble-free drawer movements
. Check slot for non-cash or large-bill transaction
. Three-position lock for maximum cash security
. Drawer open sensor
. Dedicated RS232 Interface (CR3104/3204 only)
. Removable tray with a lock-on cover. Bill compartments and coin compartments are
adjustable. The tray cover TC3100 for CR3100/3104 and TC3200 for CR3200/3204 are
optional.
SPECIFICATIONS
MECHANICAL: Dimensions: 500 (W) x 420 (D) x 90 (H) mm (CR-3200/3204)
400 (W) x 410 (D) x 85 (H) mm (CR-3100/3104)
Weight: 9.0Kgs (CR-3200/3204) and 6.7Kgs (CR-3100/3104)
ELECTRICAL:
INPUT TO SOLENOID
Pulse Amplitude 12 to 24 VDC Max. Input Voltage 26.4 VDC
Pulse Width 100 to 200 msec Current Consumption 1A @ 12 VDC
Pulse Duty Cycle 10% max. Activation Current 0.9 A max.
SERIAL INPUT (CR3104/3204 only)
Data Format
Standard RS232C
Protocol No handshake
Baud rate:150,300,600,1200,2400,4800,9600,19200
Parity: none, even, or odd
Data bits: 7 or 8
8P Telephone JACK PIN configuration (CR3100/3200 only)
PIN1 (BLACK) OPEN drawer sensor, connects to PIN2 when drawer open
PIN2 (RED) OPEN drawer sensor, connects to PIN1 when drawer open
PIN7 (GREEN) INPUT to solenoid
PIN8 (YELLOW) INPUT to solenoid
INTERFACE DESCRIPTION
Model CR-3100/3200 with POS Printer Interface:
Whenever the POS application software sends the required special command to the
POS printer or CR port of Posiflex POS system, the printer will output an electrical pulse
Loading...