Posiflex CR-2210 User Manual

P/N: 1

9230900050

CR-2210 SERIES

CASH DRAWER

FCC Notes:

This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims
any warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technology, Inc. the publisher of this documentation.
© Copyright Posiflex Technology, Inc. 2010
All brand and product names and trademarks are the property of their respective holders.

USER’S MANUAL

Rev. C0

Part 1

BRIEF INTRODUCTION

INTRODUCTION

The CR-2210 series is a flip-top type cash drawer. It provides Aluminum
alloy die cast case with zero externally accessible screw.

FEATURES

 Flip-top design
 Contemporary style with regular width of 460mm and flat side surfaces
 Rugged design with no screw to be accessed from outside
 Advanced electronics that extends the MTBF (Mean Time Between

Failure)

 Three-position lock with automatic spring back function for maximum

cash security

 Check slot with check storage underneath cash tray for non-cash or

large-bill transaction without opening drawer

 2 fixed and 4 adjustable (total 6) bill compartments
 1 fixed and 7 adjustable (total 8) coin compartments. Partially

adjustable in size and number by use of coin compartment separator

 Provided with various interface selection including direct (printer) drive,

dedicated RS232, USB

 Optional additional removable tray. Also optional tray cover with lock
 WEPOS certified
 2 color choices: Ivory and Black

MODEL NUMBER & INFERFACE

Model Number

CR-2210 Printer drive N. A.

CR-2214 Dedicated RS232 N. A. 12VAC / Adaptor
CR-2215 USB USB PID 12VAC / Adaptor

CARTON CONTENTS

1. Cash drawer pre-assembled.

2. User’s manual.

3. Separators of coin compartment: 5 pcs.

4. Key 2pcs: There is a key serial No. sticker on the cash drawer bottom
plate. If user lost the key he/she can order the key according to this
number.

5. Signal Cable depend on model

Interface Security Code Power / Source

12/24 V Pulse /
Printer

Part 2

a). For CR-2210: The standard signal cable is 21863018010 which has a 8

pin plug at one end to connect to the cash drawer and a 6 pin modular
plug at the other end to connect to the POS system/printer. This cable
serves for most popularly used POS equipment such as Posiflex POS
terminals, Posiflex POS printers, most Epson POS printers, most Star
POS printers and all other compatibles. The user may cut the 6 pin end
or order the ready cut cable CCBLA-180A and assemble this free end
according to his POS printer specification if the POS printer used
utilizes different connection. The cable connection on CCBLA-180A is
as below:

Wire color

RJ45 Function

Red Pin 1 Drawer open sense
Blue Pin 2 Drawer open sense return
Green Pin 7 + 24V to solenoid
Yellow Pin 8 Drawer kick pulse

b). For CR-2214: Serial signal RS232 DF9F RJ9 conversion cable

(21863259900/21863159900).

c). For CR-2215: USB cable (21863250800/21863150800)

6. Power Source depend on model

a). For CR-2210: not applicable

b). For CR-2214: Power adapter 12VAC 1.5A

c). For CR-2215: Power adapter 12VAC 1.5A

INSTALLATION

Coin compartment adjust:

Open the top cover and remove any protective materials such as a

piece of PE foam if it exists.

The coin compartment separator can be removed from and inserted
till click into the grooves in adjustable coin compartment zones for appropriate
compartment size.

Coin Compartment Separator

Adjustable Coin Compartment

Part 3