Posey Stop Guard User Manual



FALL MANAGeMeNt

Posey

®

Door Guard/Stop Guard & Do Not Enter Sign/Banner

The Posey Door Guard/Stop Guard and Do Not Enter Sign/Do Not Enter Banner provide a
strong visual reminder to resi dents not to exit through the doorway, or enter “off limit” rooms.
The Door Guard (8210) and Do Not Enter Banner (7998) attach with hook and loop adhesive
strips to the doorframe and remove easily in case of emergency. Both Guards fit doorframes up
to 53” (135 cm) wide. The Stop Guard (8209) and Do Not Enter Sign (7997) attach with hook and

loop adhesive strips directly onto the door.

REF

7997 Do Not Enter Sign (sign only)

REF

7998 Do Not Enter Banner (sign and banner)

REF

8209 Stop Guard (sign only)

REF

8210 Door Guard (sign and guard)

Inspection

material. Banner does not prevent residents from exiting through door.

Inspect before each use. Check for broken stitches, or torn, cut or frayed

Application Instructions:

7997 and 8209 1. Remove backing from adhesive strips and apply to the front of the door.
7998 and 8210 1. Remove backing from adhesive strips and apply strip vertically to

each side of the doorjamb at approximately waist level.

2. Attach Door Guard/Do Not Enter Banner to each side.

Note: Replacement adhesive strips available at hardware/craft stores.

Disposal

Dispose of per

your facility policy or applicable
local code for BIOHAZARDOUS
material.

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: [phone] or 1.626.443.3143 • Fax: [phone] or 1.626.443.5014

© 2010 Posey Company. All rights reserved.

Storage Instructions

This device is designed for use in normal indoor environments.
This device may be stored in ambient warehouse temperatures
at normal humidity levels. Avoid excess moisture or high
humidity that may damage product materials.

8209

8210

7998

7997

Washing Instructions:

7997 and 8209 - Wipe with mild soap and water or
disinfectant.

7998 and 8210 - Machine
wash warm, tumble dry low.

M1640 REV B 012110