Posey Pulse Oximeter Probe Wraps User Manual

OXIMETER

PROBE

SENSORS

WIRE



RESPIRATORY THERAPY

Posey Pulse Oximeter Probe Wraps replace adhesive tape when securing all
models of flexible optical transducers or probe sensors. The Wraps hold sensor
firmly to prevent misalignment of optical components, while blocking out
excessive ambient light. The soft foam tapeless wrap does not stick to the skin,
allowing for easy application or removal and helping preserve delicate skin. The
universal designs fit a neonatal foot, infant toe, pediatric or adult finger. Posey
wraps may also be cut to fit any length (1 dozen per box).

Catalog No. Width Length Thickness

6554 1 ¼” (3 cm) 5 ¼” (14 cm) 5/8” (0.5 cm)
6554P ¾” (2 cm) 4” (10 cm) 5/8” (0.5 cm)

CLOSURE TABS

6554P

6554

POSEY PROBE WRAP

FOOT APPLICATIONS

Posey® Pulse Oximeter Probe Wraps

• Make sure your patient has stable peripheral vascular function
before you place a pulse oximeter sensor.

• Secure the sensor loosely with the Posey Pulse Oximeter Probe
Wrap and never wrap it tightly.

• Check the site immediately after applying the sensor to ensure
that circulation is adequate.

• Include circulation checks with all patient assessments.

• Change the pulse oximeter site every 2 hours, or according to your
institution’s protocol.

• Closely monitor infants or elderly adult patients with fragile skin.

• Make sure closure tab does not contact patient’s skin.

TOE APPLICATIONS

FINGER APPLICATIONS

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: [phone] or 1.626.443.3143 • Fax: [phone] or 1.626.443.5014

© 2012 Posey Company. All rights reserved.

M6255 REV A 073012