Posey Pressure-Relief Positioning Rolls User Manual



WOUND PREVENTION

Posey® Pressure Relief Positioning Rolls

Pressure Relief Positioning Rolls

Helps provide pressure relief and/or body positioning. Use

LATEX

singly for positioning of the trunk, upper, or lower extremities.
Rolls tie together for whole body support in lateral or dorsal
positioning.

Two types of covers available: Water-repellent, flame-retardant vinyl, or
machine washable cotton/polyester. Both “unzip” for easy washing of
outer cover.

Filled with polystyrene beads engineered to absorb pressure, provide
maximum contour for the body and positioning comfort. Meets CA 117,
Section E for flame retardancy. One pair per package.

REF

6304 High Density, cotton/polyester cover, 8”D x 24”L

(20 cm x 61 cm), 13” (33 cm) ties

REF

6304SC High Density, wipe-clean vinyl cover, 8”D x 24”L,

(20 cm x 61 cm), 13” (33 cm) ties

REF

6305 Low Density, cotton/polyester cover, 8”D x 24”L,

(20 cm x 61 cm), 13” (33 cm) ties

REF

6305SC Low Density, wipe-clean vinyl cover, 8”D x 24”L,

(20 cm x 61 cm), 13” (33 cm) ties

Monitoring

Be sure to follow your facility’s policies and guidelines for
frequency of patient monitoring. Posey recommends that this product
be removed at least every two (2) hours to check for skin integrity,
proper circulation and range of motion.

6304SC

6305SC

6305

Inspection

Inspect before each use: check for broken stitches; or torn,
cut or frayed material. DO NOT use soiled or damaged products. DO
NOT use if the product has a hole or beads are leaking out.

Cleaning Instructions:

Vinyl Covers and inner bead filled pillows-

• Wipe Clean with mild detergent. OSHA

approved intermediate level disinfectants can
be used per manufacturer instructions.

• After cleaning, products MUST be rinsed with water to remove any

residual chemicals.

• Make sure products are completely dry before use.

Brushed Cotton/Polyester Covers Only-

Remove outside cover and machine wash.

Disposal

Properly dispose of the product per facility’s policy for

BIOHAZARDOUS materials.

Storage and Handling

This device is designed for use in normal indoor environments.
This device may be stored in ambient warehouse temperatures at
normal humidity levels. Avoid excess moisture or high humidity
that may damage product materials.

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: [phone] or 1.626.443.3143 • Fax: [phone] or 1.626.443.5014

© 2012 Posey Company. All rights reserved.

M1035 REV B 080712