
Posey® Seizure Side Rail Pads
APPLICATION INSTRUCTIONS
Posey Seizure Pads are form fitted to fit snugly over the existing bed side
rails with a 1" (3 cm) layer of medium density foam to help safeguard
against accidental patient injury. The outer shell is constructed from
lightweight sheer nylon denier to help prevent patient “rub” burns and
allows unobstructed movement of the side rails to the lowered position.
The nylon cover is backed with a urethane waterproof coating that easily
wipes clean with liquid disinfectant. Open windows in upper section to allow
for easy access to controls on most bed models. Navy Blue.
Monitoring
Posey Seizure Side Rail Pads will not prevent a determined
patient from exiting the bed, going over or attempting to go between or
through side rail gaps. Not all hospital beds allow for full articulation when
this product is applied. Slowly articulate the head of the bed to ensure
compatibility. Always follow your facility’s policies and procedures for patient
assessment, monitoring and rehabilitation.
Application Instructions:
1. Inspect product set prior to use. Do not use soiled or damaged products.
2. Identify each of the components in the set. Each pad has sewn-in
tags, identifying its intended location from the perspective of lying
down in the bed (Fig. 1).
3. Place each of the pads onto the proper side rail and shift it into
position (Fig. 2).
4. Securely fasten all the plastic side release buckle fasteners along the
edges of each pad (Figs. 3 and 4).
5. Lower each of the side rails to check clearances (Fig. 5). Note that there
may be some resistance as the rails are completely lowered. This should
be expected as there are close manu facturing tolerances between the
bed and the side rail. The shear nylon covers are chosen to minimize
any potential binding.
6. Check for proper fit. Modified beds may not be compatible with Posey
Seizure Side Rail Pads.
Fig. 3
Fig. 5
Fig. 2Fig. 1
Fig. 4
Disposal
Properly dispose of the product per facility’s policy for
BIOHAZARDOUS materials.
Storage and Handling
This device is designed for use in normal indoor environments. This device
may be stored in ambient warehouse temperatures at normal humidity levels.
Avoid excess moisture or high humidity that may damage product materials.
Cleaning Instructions:
Wipe clean with soap and water or disinfectant.
DO NOT use cleaners that contain Phenol.
Centrella is a registered trademark of Hill-Rom.
TIDI Products, LLC • 570 Enterprise Drive, Neenah, WI 54956 USA
Phone: 1.800.521.1314 • International: +1.920.751.4036 • www.tidiproducts.com
© 2024 TIDI Products, LLC. All rights reserved. Posey is a registered trademark of TIDI Products, LLC.
Posey Seizure Side Rail Pads
REF
5757 Fits Hill-Rom® Centrella® Beds
M6134 REV B 03-20-2024