Posey Molding Memory Foam Cushion User Manual

®

Posey

Molding Foam Cushion and

Foam Cushion with Coccyx Cutout

Qua lity Pr oduct s since 1937

Seating and PoSitioning

MOLDING FOAM CUSHION

INDICATIONS:

Patients at risk for pressure ulcers and/or requiring posture support and/or inclined to slide
forward.

PATIENT BENEFITS:

• Constructed from 1½” (4 cm) thick viscoelastic foam (“memory foam”) laminated to a rm urethane base.

• Provides stability and pressure distribution, helping to reduce the risk of pressure ulcer development.

• Unique rounded front edge design reduces pressure under the knee and thighs.

• Convex shaped bottom helps compensate the “hammocking” eect of sling wheelchair seats.

• Zippered outer cover removes quickly and easily for cleaning.

LATEX

FOAM CUSHION wITH COCCyx CUTOUT

INDICATIONS:

For patients at risk of pressure ulcers in the coccyx area.

PATIENT BENEFITS:

• Urethane foam inner construction with Posey’s Sure-Grip vinyl covers to provide a smooth
seating surface.

• Cutout in the back helps provide offloading of the coccyx.

DIMENSIONS
CAT. # CUSHION

6910F Foam Cushion w/cutout 16 x 16 x 3 (41 cm x 41 cm x 8 cm) Flat 1 lb. (0.45 kgs.)
6920F Foam Cushion w/cutout 18 x 16 x 3 (46 cm x 41 cm x 8 cm) Flat 1 lb. (0.45 kgs.)
7024C Molding Foam Cushion 18 x 16 x 3 (46 cm x 41 cm x 8 cm) Convex 3 lbs. (1.4 kgs.)

All Cushions meet CA #117 ame retardancy standards.

MONITORING

Always follow your facility’s policies and procedures for patient assessment, monitoring

and rehabilitation.

W” x L” x H”

Maximum weight capacity - 250 lbs. (114 kgs.).

BOTTOM WEIGHT

7024C

6910F

FRONT

INSPECTION

Inspect before each use: check for broken stitches; or torn, cut or frayed material. DO

NOT use soiled or damaged products.

APPLICATION INSTRUCTIONS

1. Make sure the cushion dimensions match those of the wheelchair.

2. Place cushion on the wheelchair seating surface.

3. Align the front edge of the cushion with the front edge of the wheelchair seat.

CLEANING INSTRUCTIONS - COvER ONLy

• Wipe Clean with mild detergent. OSHA approved intermediate level disinfectants
can be used per manufacturer instructions. DO NOT use phenol and benzyl based
disinfectants.

• After cleaning, products MUST be rinsed with water to remove any residual chemicals.

• Make sure products are completely dry before use.

DISPOSAL

Properly dispose of the product per facility’s policy for BIOHAZARDOUS materials.

STORAGE AND HANDLING

This device is designed for use in normal indoor environments. This device may be stored in
ambient warehouse temperatures at normal humidity levels. Avoid excess moisture or high
humidity that may damage product materials.

wARRANTy:

All Posey Foam Cushions are warranted to perform as indicated. The Posey Company will, at their
option, repair or replace, except for vandalism or other abuse, any Cushion for a period of one (1)
year from date of purchase.

OPTIONAL ACCESSORy:

The Posey Wheelchair Cushion Incontinence Pad
is made from a durable quilted polyester laminate.
Made of highly absorbent material, the pad is
designed to help protect against urine spills.
Non-latex elastic straps at all four corners secure
the pad to the cushion. Will absorb and hold up to
300cc, or 10 oz. of uid. Fits cushions up to 20”W x
18”D x 2”H (51 cm x 46 cm x 5 cm).

REF

6303 Incontinence Pad (Each)

20”W x 18”D (51 cm x 46 cm)

6303



© 2009 Posey Company. All rights reserved.

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: [phone] or 1.626.443.3143 • Fax: [phone] or 1.626.443.5014

M6010 052209