Posey Lateral Stabilizers User Manual

Posey

®

Wheelchair Lateral Stabilizers

Qua lity Pr oduct s since 1937

LateraL stabiLizers

Posey Lateral Arm Rest Stabilizers feature medium density foam inserts that
provide cushioning support, while helping control upper torso alignment. Two
lengths available: 11½” (29 cm) to t desk arm wheelchairs and 16½” (42 cm) to
t full length arm wheelchairs. Features removable covers that secure with hook
and loop fasteners. Can also be used on the back posts of the wheelchair.

MODEL SIZE PROFILE COVER

Desk Arm Wheelchairs

6312SC 4”D x 111/2”L (10 cm x 29 cm) Cylindrical Light Blue Vinyl
8216 6 1/2”D x 111/2”L (17 cm x 29 cm) Flat Top Navy Blue Cotton/Polyester
8216SC 6 1/2”D x 111/2”L (17 cm x 29 cm) Flat Top Light Blue Vinyl

Full Length Arm Wheelchairs

6316SC 4”D x 16 1/2”L (10 cm x 42 cm) Cylindrical Light Blue Vinyl
8212 61/2”D x 16 1/2”L (17 cm x 42 cm) Flat Top Navy Blue Cotton/Polyester
8212SC 61/2”D x 16 1/2”L (17 cm x 42 cm) Flat Top Light Blue Vinyl

Monitoring

Always follow your facility’s policies and procedures for

patient assessment, monitoring and rehabilitation

insPeCtion

Inspect before each use: check for broken stitches; or torn,

cut or frayed material. DO NOT use soiled or damaged products.

Seating and poSitioning

8212

6312SC

aPPLiCation instruCtions

1. Pull apart the slit found on the bottom of each Lateral Stabilizer.

2. Slip the Lateral Stabilizer over the wheelchair armrest and release
when in position.

3. Secure stabilizer with the “hook and loop” fastener (8212 and 8216
series only).

CLeaning instruCtions (Covers only):

Cotton/Polyester Covers:

Vinyl Covers:

• Wipe Clean with mild detergent. OSHA approved

intermediate level disinfectants can be used per
manufacturer instructions. DO NOT use phenol
and benzyl based disinfectants.

• After cleaning, products MUST be rinsed with water to remove any

residual chemicals.

• Make sure products are completely dry before use.

DisPosaL

Properly dispose of the product per facility’s policy for

BIOHAZARDOUS materials.

storage anD HanDLing

This device is designed for use in normal indoor environments. This
device may be stored in ambient warehouse temperatures at normal
humidity levels. Avoid excess moisture or high humidity that may
damage product materials.

6316SC

8216SC



© 2009 Posey Company. All rights reserved.

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA
Phone: [phone] • Fax: [phone] • Web: www.posey.com

M1685 052209