PolyScience 4100 Data sheet

Chillers and Coolers | Chillers | Recirculating

Recirculating Coolers —
Model 4100 Liquid-to-Liquid Cooler

Key Specifications

Working Temperature Range: Facility water +10° to 60°C

Maximum Process Temperature: 60°C

Temperature Stability: ±0.4°C

Cooling Capacity: 10,000 W based on 10°C ǻT

Reservoir Capacity: 1.1 gallons/4.2 liters

Overall Dimensions 27.6 x 14.5 x 22.6"
(L x W x H): 70.2 x 36.8 x 57.5 cm

1

Features:

• Protects precision equipment from facility water
contaminants

• Quiet, energy efficient liquid-to-liquid heat removal

• Displays temperature and pressure or flow rate
information

• Built-in temperature and low flow alarms

Liquid-to-liquid cooling uses your facility’s water,
pumped through the 4100, to remove heat from your
application without risk of contamination. Heat removal
capacity is dependent on the facility water temperature.

Extra large digital readouts provide at a glance access to
temperature as well as process pressure or flow rate information.

Larger capacities are available. Contact PolyScience
Customer Service Department for more information.

C 155859 US

Temperature Range Facility water +10° to 60°C

Cooling Capacity
(W/BTU)

Power Requirements (VAC/Hz) 200-240/ 50/60 (plug for 230V)

Standard Pump Turbine Pump

Maximum Pressure psi (bar) 100 (6.9)

Maximum Flow gpm (l/min) 3.5 (13.2)

Part Number 200-240 VAC/50/60 Hz 4150T21A330D

ǻT = Process water temperature — facility water air temperature
Electrical plug for the part number listed is standard U.S. type. See page 128 for additional plug types and part numbers.
Specifications listed are for 60 Hz models. For specifications on 50 Hz models see Technical Specification pages 150 and 151.

15,000/52,855 based on 15°C ǻT
10,000/34,100 based on 10°C ǻT

4,500/5,345 based on 5°C ǻT

1

1

1

108

| Phone: [phone] • [phone]