Polti LECOASPIRA PROGRAM User Manual

PROGRAM

Fig. 2 Fig. 3 Fig. 4Fig. 1

Fig. 5

Fig. 6

Fig. 6a

Fig. 7

MAX

Fig. 8 Fig. 10

Fig. 11a

Fig. 11b

Fig. 9

Fig. 11c

Fig.12

Fig. A1

Fig. A2

Fig. A3

Fig. B

Fig. C

Fig. D

1c

2c

8B

4

8A

8C

2

8

23

24

25

26

27

22

20

3

5

8F

8H

8D

17

15

14

13

8G

8E

6

10

9

18

19

1

7

11

12

16

A1

A3

A6

T

A7

A4

C1

C2

C3

D1

D

D3

D2

O3

O1

O2

R

C

C4C4

A2

A5

P

B1

B2

A

B

E3

E1

Q

E

I

IA

F

G

L

E2

H

OPTIONAL

N

M

S

S3

S1

S5

S2

S4

A6

A7

Q

Q

Vaporetto Lecoaspira Program - M0S10133 Edizione 1S01

LECOASPIRA PROGRAM

KEY

1) Main switch

2) “OK” button

3) “SET” button

4) Steam/programme “UP” button

5) Steam/programme “DOWN” button

6) Carrying handle

7) Tank cap

8) Display
8A) Programme indicator
8B) Steam quantity indicator
8C) Suction speed indicator
8D) Steam indicator
8E) Suction indicator

8F) Boiler indicator
8G) Lamp indicating lack of water in tank
8H) Maintenance indicator

9) Built-in socket door

10) Built-in socket

11) Air output screen

12) Castors

13) Power cable

14) Power cable passage

15) Power cable compartment

16) Tool holder

17) HEPA filter

18) HEPA filter release lever

19) HEPA filter housing

20) Dirt container

21) MAX level

22) Dirt container handle

23) “Eco-Active” water filter assembly

ENGLISH

24) “Eco-Active” water filter assembly

cover

25) Shaped filtering sponge

26) Filter with microholed net

27) Tube elbow

SUCTION - STEAM ACCESSORIES

A) Flexible steam+suction hose

A1) Fitting for connecting accessories

A2)Handle

A3)Safety button

A4)Suction button

A5)Steam button

A6)Monobloc plug

A7)Locking button of the monobloc plug

B) Steam+suction extension tube

B1)Steam+suction extension tube with

parking

B2)Accessory locknut

C)Universal brush

C1) Bristle insert for universal brush
C2) Rubber insert for universal brush
C3) Rigid insert for universal brush
C4) Slides for locking fittings into place

D) Steam+suction nozzle

D1)200 mm window cleaning insert for

stem+suction nozzle

D2)130 mm window cleaning insert for
steam+suction nozzle
D3)bristle insert for steam+suction nozzle

vapore +aspirazione

E) 120° steam+suction accessory

E1)Steam lance
E3)Coloured brushes for 120° steam+suction

accessory

O1) Terry cloth
O2) Cloth
O3) Parquet cloth

P)

Spare gaskets

Q) Filler bottle
R) Tank cleaning brush

SUCTION ACCESSORIES

E2) Small suction nozzle

F) Suction lance
G) Upholstery suction nozzle
H) Suction brush with soft bristles

I) Telescopic suction tube

IA) Telescopic tube release button

L) Parquet brush

T) Biecologico

OPTIONAL ACCESSORIES

M) Turbo-brush

M1)Surface type selector

N) Mini turbo-brush
S) Professional iron

S1) Continuous steam button
S2) Steam request button
S3) “Iron heating” indicator light
S4) Temperature adjustment knob
S5) Iron rest mat

N.B. - For easy identification, accessories are
marked by the reference specified in this table.

138

LECOASPIRA PROGRAM

Read these instructions carefully before using the appliance.

Dear Customer,
Thank you for purchasing our product.

By choosing Vaporetto Lecoaspira, you will have a complete appliance for cleaning your home,
capable of vacuuming solids and liquids, sanitising with steam, drying and eliminating dust mites
and allergens. You can decide, depending on your needs, whether to use the steam and
suction together for complete cleaning, just the suction to effectively collect dust or just the
steam for specific cleaning tasks.

Lecoaspira Program is equipped with advanced features of the most modern electronics. In
fact, it is capable of operating fully 4 cleaning programmes, automatically setting the optimal
suction power and pressure of the steam depending on the surface to be cleaned.

The suction feature:
The heart of the filtration system is represented by the exclusive “Eco-Active” water filter,
patented by Polti. The “Eco-Active” water filter uses the natural purifying force of water to trap
dirt, preventing dispersion of dust into the environment. In addition, the HEPA filter collects
impurities including pollen as well as dust mites.

The steam feature:
The Lecoaspira steam is dry and powerful. Thanks to the heat, it removes and dissolves dirt
eliminating grease, germs and dust mites. The sanitising force of steam is completely natural
and has a cleaning power that even the most modern chemical detergents cannot equal.

You can find useful suggestions on our website www.polti.com to take full advantage of all the
features of your Lecoaspira. Please consult the “Guide for a Healthy and Clean Home” found
on the home page of the website.

We hope you enjoy your Polti product.

This unit conforms with EC-directives 2004/108/CE (EMC) and 2006/95/CE
(low voltage).

Polti S.p.A. reserves the right to change equipment or accessory specification wi­thout prior notice.

139

ENGLISH

LECOASPIRA PROGRAM

PRECAUTIONS

KEEP THESE INSTRUCTIONS
Read these instructions carefully before using the appliance.
Any use which does not comply with these instructions will invalidate the warranty.

SAFETY WARNINGS

Risk of electric shock and/or short circuit:

- The wiring system to which the appliance is connected must always comply with the laws in force.

- Before connecting the appliance, make sure that the mains voltage is the same as the voltage indica­ted on the data label of the appliance and that the power outlet is connected to earth.

- Always turn off the appliance at the on/off switch before unplugging it.

- If the appliance is left unused, disconnect it from the mains. Never leave the appliance unattended
with the cable plugged into the mains.

- Always make sure the appliance is unplugged before performing maintenance work of any kind.

- Do not pull the power cable out of the socket, but grasp the plug itself to avoid damage to the socket.

- Do not allow the power cable to be twisted, crushed, stretched, or come into contact with sharp or hot
surfaces.

- Do not use the appliance if the power cable or other important parts of the appliance are damaged. In­stead, contact an authorised service centre.

- Do not use electric extension leads that are not authorized by the manufacturer, as they may cause
damage or fire.

- Never touch the appliance with wet hands or feet with the cable plugged into the mains.

- Do not use the appliance when barefoot.

- Do not use the appliance near washbasins, bathtubs, showers or containers full of water.

- Never immerse the appliance, the cable or the plugs in water or another liquid.

- Do not direct the steam jet at live electrical and/or electronic equipment or at the appliance itself.

- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.

SAFETY WARNINGS:

ENGLISH

- Use of the appliance in places where there is a danger of explosions is prohibited.

- Do not use the product with toxic substances.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- In case of accidental fall of the appliance it is necessary to have it checked by an authorized Service
Centre as the internal safety features may have been affected.

- In case of breakdown or malfunction switch off the appliance and never attempt to disassemble it, but
refer to an authorized Polti Service Centre.

- This appliance is equipped with safety devices which are to be replaced only by a suitably qualified te­chnician.

Risk of injuries and/or burns when using the appliance:

WARNING: High temperature.
Danger of burns!
Do not touch the parts indicated
on the product.

140

LECOASPIRA PROGRAM

-

Before cleaning or storing the appliance, always first ensure that the appliance has cooled down completely.

- Do not direct the steam jet at people, animals or debris.

- High-pressure jets can be dangerous if used improperly.

- Do not direct the steam jet at people, live electrical equipment or the appliance itself.

- Never place your hands inside the jet of steam.

ATTENTION:
Danger of burns!

- While refilling with water, switch off and disconnect the appliance from the mains.

- Do not use if the appliance has been dropped, has visible signs of damage or leaks.

- Do not use the appliance to suck up acids or solvents, as these might cause serious damage to the
appliance and above all do not suck up explosive dust or liquids, as these could cause explosions on
coming into contact with the inside components of the appliance.

- Do not suck up toxic substances.

- Do not suck up burning or incandescent objects such as embers, ash or other material in which com­bustion is taking place.

- If ironing whilst sitting down, take care to ensure that the jet of steam is not angled towards your legs.
Steam can scald.

- Before connecting the appliance to the current, ensure that the continuous steam jet button is not
pressed.

- Never leave the iron unattended when it is plugged in.

- Before refilling the appliance when it is hot, allow it to cool for a few minutes.

- Keep your face away if you fill the boiler when it is still hot, as a few drops of water can evapo­rate on contact with the hot boiler, causing a jet of steam.

- Do not empty the appliance when the water inside the boiler is still hot.

- Do not try to unscrew the cap when the appliance is in operation.

- Regularly check the status of the safety cap and seal, replace with original parts as necessary.

- Make sure the safety cap is screwed on properly, otherwise it may cause steam leaks.

- Do not force open the cap when there is a minimum pressure of steam in the boiler.

SAFETY WARNINGS

using the appliance:

- By nature, water contains magnesium, mineral salts and other deposits that favour the formation of
scale. To prevent these deposits from causing damage to the appliance, use KALSTOP FP 2003, a
special natural descaling agent that removes scale. This allows avoiding scale formation and protec­ting the metal walls of the boiler. KALSTOP FP 2003 can be found in small appliance stores and Polti
service centres. Alternatively, use a 50/50 mixture of tap water and demineralised water.

- Never use distilled water or scented water.

- Do not put any detergent or chemical substance in the boiler.

- We recommend you use original Polti products only, as products of other brands may not be

suitable for use in Polti products and could cause damage.

- Never leave the appliance exposed to the weather.

- Do not place the appliance near a live element, an electric stove or any other source of heat.

- Do not expose the appliance to temperatures unde 32°F (0 °C) e superiori ai 104°F (40 °C).

- Press the buttons only with a finger, without excessive force and avoid using a pointed object such as
a pen.

- Do not wind the power cable around the appliance, especially when the appliance is still hot.

- To avoid prejudicing the safety of the appliance when repairing or replacing accessories, use only ori­ginal spare parts.

141

ENGLISH

LECOASPIRA PROGRAM

- Let the appliance cool down before cleaning it.

- Before storing the appliance make sure that it has completely cooled down.

- The water container can be filled with tap water.

- Do not suck up materials such as cement, chalk etc. which solidify once they come in contact with wa­ter thus damaging the appliance.

- It is necessary to keep the unit in horizontal position during operation.

- Always rest the appliance on a stable surface.

- Iron only on supports that are heat resistant and which allow the steam to permeate.

- If the iron rest mat needs to be replaced, only use original spare parts.

- The iron must be used and rested on a stable surface.

- When placing the iron on its stand, make sure that the surface on which the stand is placed, is stable.

- Do not place the hot appliance on heat-sensitive surfaces.

CORRECT USE OF THE PRODUCT

This appliance is intended for home use as a generator of steam and as a vacuum of liquids, dust
and dirt in accordance with the instructions provided in this manual. Please read these instructions
carefully and keep them, as you may find them useful in future.

Polti S.p.A. declines all liability for any damage or accident deriving from any use of this
appliance which is not in conformity with the instructions contained in this booklet.

ATTENTION

Directive 2002/96/EC (Waste Electrical and Electronic Equipment - WEEE): information for users
This product complies with EU Directive 2002/96/EC.

The crossed-out wastebasket symbol on the appliance means that at the end of its useful
lifespan, the product must be disposed of separately from ordinary household wastes.

ENGLISH

the end of its useful lifespan.
Appropriate separate collection to permit recycling, treatment and environmentally compatible dis­posal helps to prevent negative impact on the environment and human health and promotes the re­cycling of the materials making up the product. For more information on available collection facili­ties, contact your local waste collection service or the shop where you bought this appliance.

The user is responsible for delivering the appliance to an appropriate collection facility at

142

LECOASPIRA PROGRAM

Lecoaspira Program is a multi-function appliance which, depending on the need and type of clea­ning you want to do, can be used:

- Just as a vacuum to remove dust from surfaces. In this case, remember to add water to the dirt
collection container (see Paragraph 1 of the “preparing for use”)

- Just as a steam cleaner to sanitise surfaces. For this feature, the container must be filled with wa­ter to supply the boiler (see Paragraph 2 of the “preparing for use”)

- To use the suction and steam features at the same time to vacuum, wash and dry at the same
time. Naturally, in this case both the dirt collection container and the tank must be filled.

PREPARING FOR USE

IF YOU HAVE TO VACUUM:

1)

1.A ) FILL THE DIRT COLLECTION CONTAINER/FILTER WITH WATER

Lift the handle (22) of the dirt collection container (20) (fig. 2). Remove the container (20) from its hou­sing, turn the handle (22) of the container backwards (fig. 3) in order to remove the “Eco-Active” filter as­sembly (23). Fill the container with about 1,2 l of plain tap water up to the MAX indicator (21) (fig. 5).
You can also add Bioecologico, the natural, anti-foam liquid and deodorant to the container which, in ad­dition to filling the room with a pleasant perfume, prevents the formation of foam in the water filter, guaran­teeing the correct operation of the appliance. (For more detailed information please refer to the specific
paragraph).
Replace the filter assembly (23) in the dirt container (20) returning it to its original position. Reposition the
dirt container (20) in the specific space and turn the handle until it returns to its starting position.

WATER REPLACEMENT DURING USE

1.B )

Dust, solids or liquids can be vacuumed equally with this product.
When the dirt sucked into the water container (20) reaches the maximum allowed level, suction will be
automatically blocked by the special safety float. This can also occur when the water in the container is
very dirty. In these cases, there is an increase in the motor rpm and after 10 seconds the appliance
automatically pauses; the suction speed lights (8C) and the suction light (8E) flash. When this occurs,
the water must be replaced in the container.
Turn off the appliance and only restart it when the level of the water in the container has been restored as
described in the chapter “Emptying and cleaning the dirt container.”
Any immediate restarting when the appliance has gone into pause mode can damage the air outlet filter.

IF YOU NEED TO USE THE STEAM FEATURE:

2)

2.A ) FILLING THE BOILER

Unscrew the safety cap (7) (fig. 1) and fill the boiler with about 1,1 l of water using the appropriate filler
bottle (Q). Screw the cap back on (7) carefully, making sure that the safety cap is screwed on properly,
otherwise steam make leak out.
N.B. Ordinary tap water may also be used. However, since water contains limestone by nature, which
may cause scaling in the long run, we recommend using a mixture of 50% tap water and 50% deminera­lised water. To use tap water only and avoid scale formation, we recommend the addition of the special
natural scale removal agent KALSTOP FP 2003.

143

ENGLISH

LECOASPIRA PROGRAM

Do not use only demineralized water but mix it as described above with tap water.
We recommend you use original Polti products only, as products of other brands may not be suitable for
use in Polti products and could cause unwelcome difficulties. Never use distilled water or scented water.

SWITCHING ON

3)

Open the monoblock socket door (9), insert the monobloc plug (A6) of the flexible hose (A) pushing it
until you hear the click of the hooking mechanism (A7)(fig. 6).
Connect the power plug (13) to a suitable electric socket.
Switch on the appliance by pressing the power switch (1) (fig.7). A buzzer indicates that the ap­pliance has been turned on correctly, and it starts automatically in manual mode MA.

N.B. The handle of the flexible hose (A2) is fitted with a safety button (A3) to prevent the acciden­tal activation of steam delivery by children or people who do not know how it works. Should the ap­pliance be left momentarily unguarded, move the safety button (A3) to the off position. To continue
steam delivery, move the switch back to its original position.

HOW TO USE

4)

Lecoaspira Program can be used two different ways:
MANUAL OR PROGRAMMED.

MANUAL MODE:
and the suction power based on need and the surfaces to be cleaned.

ENGLISH

PROGRAMMED MODE: allows you to choose from 4 pre-set cleaning programmes. Every pro­gramme is developed to automatically dispense, in sequence, the amount of steam and suction
power necessary to clean a specific surface. In programmes that envisage the use of the two fun­ctions, steam and suction, the suction function starts automatically after the steam function and
lasts in proportion to that of the steam, enabling the surface treated to dry.
The times that steam and suction are supplied have been carefully calibrated for various types of
surfaces and have been developed on surfaces with standard dimensions. When cleaning very
large areas, at the end of the cycle it is possible to immediately restart the programme by simply
pressing the (A5) button in order to complete the cleaning of the entire surface.
Otherwise it is possible to finish the job in manual mode (see paragraph SET THE SUCTION LE­VEL IN MANUAL MODE for the suction function or paragraph SET THE STEAM LEVEL IN MA­NUAL MODE for the steam function).
N.B: If using in programme mode, remember that the suction speed and the quantity of steam are
set and therefore it is not possible to adjust them manually.

envisages the possibility of manually adjusting the quantity of water dispensed

144

LECOASPIRA PROGRAM

5) HOW TO SET THE APPLIANCE IN MANUAL MODE

If the appliance is off: turn the appliance on by pressing the main switch (1). When it is turned on,
the appliance starts in manual mode (MA).

If the appliance is set in programmed mode: when pressing the SET key (3), the indicator (8A)
starts to flash. Using the UP (4) and DOWN (5) keys it is possible to selected the programme MA.
Press OK to confirm the selection.

SET THE SUCTION LEVEL IN MANUAL MODE

5.1 )

By just pressing the suction button (A4) it is possible to start vacuuming. By holding the button (A4)
down it is possible to select the suction speed desired based on how dirty the surface is. By increa­sing the suction power, the sections of the indicator (8C) increase; when reducing the suction po­wer, the segments decrease.
The suction function can be adjusted to 4 levels of strength, for cleaning:

- level 1: curtains

- level 2: sofas and cushions

- level 3: rugs/carpets

- level 4: floors or for suctioning liquids

To stop the suction just press button (A4) once. Suction will stop.
N.B. When the appliance is turned back on, the suction level is the one that was set the last time it
was used.

SET THE STEAM LEVEL IN MANUAL MODE

5.2 )

Turn on the boiler using the UP (4) key. The two indicators (8B) and (8F) start to flash.
Select the steam pressure desired by pressing the UP (4) key again. In fact, every time the key is
pressed, one of the steam pressure indicators goes on (8B) with a resulting increase in the pres­sure of the steam being supplied.
The DOWN (5) key performs the reverse function; in other words, every time the DOWN (5) key is
pressed there is a decrease in the steam pressure and the indicators go off (8B).
It is possible to regulate up to 4 levels of steam:

ENGLISH

- Strong steam: (4 indicators lit) to remove scale, stains, grease and to sanitise;

- Normal steam: (2 or 3 indicators lit) for carpets, rugs, glass, parquet and floors;

- Gentle steam: (1 indicator on) to steam plants, clean delicate fabrics, wall coverings and sofas.

After setting the level desired, wait until the indicator light (8B) stays on. This means that the pres­sure of the steam corresponds to the one actually selected and the appliance is ready to be used.
Press the button (A5) on the handle to dispense steam over the surface to be cleaned and the in­dicator (8D) lights up.
To stop the steam flow, simply release the button (A5).
N.B. When first operating it, there may be some drops of water mixed with the steam due to imper­fect thermal stabilization. We therefore recommend that the first jet of steam be directed onto a
rag.

145