Polk Audio RTi User Manual

RTi SERIES LOUDSPEAKERS REAL WOOD, REAL HIGH PERFORMANCE
SERIES CATALOG
2 RTi SERIES LOUDSPEAKERS
RTi SERIES LOUDSPEAKERS
The new RT i Series incorporates our latest Dynamic Balance®Cone drivers, 1" tweeters and elegantly redesigned cabinets that reflect the latest styles. As you can expect from this highly popular line, the performance is classic Polk Audio midrange drivers used throughout the RTi ,CSi,
®
F/X
i series employ Dynamic Balance polymer/
®
. The bass/
mineral composite cones with rubber surrounds. Mylar bypass capacitors in the crossovers extend high frequency response and improve detail and transparency. RTi is Timbre-matched to the Polk
®
TCi in-ceiling/wall series so you can create a seamless, multi-channel system.
RTi TOWERS
1" is a silk/polymer composite dome tweeter for smoother response and better detail. A neodymium magnet, low-viscosity ferro-fluid cooling, and a heat sink on the back of the magnet, create better power handling and reliability. PowerPort
®
Plus is a patented enclosure venting technology for maximum bass performance. Magnetically shielded to allow safe placement next to televisions or video monitors. Dual 5-way binding posts allow bi-wiring and bi-amplification and accepts a variety of wiring connectors. Damped Asymmetric Hex Laminate Isolation (DAHLI) cabinet design for clean, accurate sound. Finished in cherry or black oak real wood veneer. Anti-Diffraction grilles minimize grille diffraction for spacious, 3 dimensional imaging.
RTiA9
The flagship of the RT i series. Three long-throw 7" woofers to combine the wide dynamic range benefits of a single large woofer with the tight, punchy, accurate bass response of small woofers. Combined with PowerPort Plus, these multiple woofers deliver deep high impact bass with speed and accuracy. Two 5 1/4" midrange drivers housed in their own dedicated midrange enclosure provide exceptionally detailed, powerful midrange. Recommended amplifier power 50-500 Watts/channel.
OVERALL DIMENSIONS: 48 5/8" H X 8 7/8" W X 21 3/8" D (123.51CM H X 22.54CM W X 54.29CM D) OVERALL FREQUENCY RESPONSE: 18Hz - 27kHz
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
CHERRY BLACK OAK
polk
tec hnology
RTiA9
DAHLI
Damped Asymmetric Hex Laminate Isolation (DAHLI) Cabinet Design for clean, accurate sound. The asymmetric design is made from a 6-layer laminate with 5 viscous layers to create the Optimal Shear Damping (OSD) system. The process was specifically developed for Polk. Their elegant styling aside, creating curved cabinets not only results in a stronger, more rigid and acoustically insert enclosure, but the curved walls also produce less audible coloration from panel resonances.
WWW.POLKAUDIO.COM 3
RTiA7
Approaches performance of the RTi A9 6 1/2" midrange driver, with ARC®(Acoustic Resonance Control) Port reduces midrange “boom” for clear, natural midrange. Two long-throw 7" woofers for tight, punchy and articulate bass response. Recommended amplifier power 20-300 Watts/channel.
OVERALL DIMENSIONS: 42 1/4" H X 8 7/8" W X 17 7/8" D (107.31CM H X 22.54CM W X 45.40CM D) OVERALL FREQUENCY RESPONSE: 20HZ - 27kHZ
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
CHERRY BLACK OAK
RTiA5
Smallest footprint in the RT i floorstanding series. Two 6 1/2" Polymer Composite Dynamic Balance mid/woofer with rubber surrounds.
®
ARC
(Acoustic Resonance Control) Port reduces midrange “boom” for clear, natural mids. Recommended amplifier power 20-250 watts/channel.
OVERALL DIMENSIONS: 40 1/4" H X 8 7/16" W X 15 3/4" D (102.23CM H X 21.43CM W X 40.01CM D) OVERALL FREQUENCY RESPONSE: 30HZ - 27kHZ
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
CHERRY BLACK OAK
RTiA7
POWERPORT®PLUS
The floorstanding models, RTi A9, RTi A7 and RTi A5 feature PowerPort Plus an enhancement in PowerPort technology. PowerPort Plus uses two ports (one front, one rear) and internal “plates” to further reduce air turbulence and increase bass efficiency. A computer designed tweeter faceplate radius, tapered enclosure and baffle edge radius all contribute to minimizing diffraction for more open and spacious imaging.
RTiA5
polk
technology
4 RTi SERIES LOUDSPEAKERS
BOOKSHELF LOUDSPEAKERS
1" silk/polymer composite dome tweeter for smoother response and better detail. A neodymium magnet with low-viscosity ferro-fluid cooling and a heat sink on the back of the tweeter assembly create better power handling and reliability. PowerPort with integral wall mount reduces turbulence at the mouth of the port. ARC (Acoustic Resonance Control) Port reduces midrange “boom” for clear, natural midrange. Magnetically Shielded to allow safe placement next to CRT televisions or video monitors. Dual 5-way binding posts allow bi-wiring and bi-amplification and also accepts a variety of wiring connectors. Damped Asymmetric Hex Laminate Isolation (DAHLI) cabinet design for clean, accurate sound. Finished in Cherry or Black Oak real wood veneer. Anti-Diffraction Grilles minimize grille diffraction for spacious, 3 dimensional imaging.
RTiA3
High performance bookshelf speaker. 6 1/2" polymer composite Dynamic Balance mid/woofer with rubber surround. Recommended amplifier power 20-125 Watts/channel.
OVERALL DIMENSIONS: 14 3/4" H X 8 7/16" W X 14 " D (37.47CM H X 21.43CM W X 35.56CM D) OVERALL FREQUENCY RESPONSE: 40Hz - 27kHz.
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
CHERRY BLACK OAK
RTiA1
Compact bookshelf speaker. 5 1/4" polymer composite Dynamic Balance mid/woofer with rubber surround. Recommended amplifier power 20-125 Watts/channel.
OVERALL DIMENSIONS: 12" H X 7 3/8" W X 11 1/2" D (30.48CM H X 18.73CM W X 29.21CM D) OVERALL FREQUENCY RESPONSE: 50Hz - 27kHz.
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
CHERRY BLACK OAK
polk
tec hnology
RTiA3
POWERPORT
Polk Audio loudspeakers shatter the boundaries of bass response with patented PowerPort bass venting
technology. Conventional ports have limitations: air turbulence at the mouth of the port can cause “port noise” and bass output losses of up to 3dB. (A loss of 3dB means that half of your amplifier power is being wasted on turbulence instead of bass!) The distinctive design of the Polk Audio PowerPort gradually slows air exiting the port, vastly reducing turbulence, port noise and energy loss. The result is bass that you will feel as well as hear; bass that reaches out, grabs you by the lapels and shakes you up—for a completely visceral and emotional movie and music experience. See more about PowerPort at www.polkaudio.com/catalog/technology/.
®
RTiA1
WWW.POLKAUDIO.COM 5
CENTER LOUDSPEAKERS
1" silk/polymer composite dome tweeter for smoother response and better detail. A neodymium magnet with low-viscosity ferro-fluid cooling and a heat sink on the back of the tweeter assembly, create better power handling and reliability. ARC (Acoustic Resonance Control) Port reduces midrange “boom” for clear, natural midrange. Magnetically shielded to allow safe placement next to CRT televisions or video monitors. Reversible design allows center channel to be “inverted” to fire up at listening position. Damped Asymmetric Hex Laminate Isolation (DAHLI) Cabinet design for clean, accurate sound. Finished in cherry or black oak real wood veneer. Anti-diffraction grilles minimize grille diffraction for spacious, 3 dimensional imaging.
CSi A6
The ultimate in RTi Center channel performance. Dual PowerPorts reduce turbulence at the mouth of the port. Dual 6.5" polymer composite Dynamic Balance mid/woofer with rubber surround. Cascade tapered array crossover minimizes interference between the two mid/woofers in the upper midrange to provide a wider sweet spot and greater accuracy. Kickstand supports the rear part of the speaker on the rear “slope” of projection TVs. Dual 5-way binding posts allow bi-wiring and bi-amplification and also accept a variety of wiring connectors. Recommended amplifier power 20-200 Watts/channel.
OVERALL DIMENSIONS: 7 3/4" H X 24" W X 14" D (19.68CM H X 60.96CM W X 35.56CM D) OVERALL FREQUENCY RESPONSE: 45HZ - 27kHZ
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
CHERRY BLACK OAK
CSi A4
Compact CSi center channel speaker . Dual 5 1/4" polymer composite Dynamic Balance mid/woofer with rubber surrounds. Compact size fits in virtually any application. 5-way binding posts accept a variety of wiring connectors and speaker cable up to 10 AWG. Recommended amplifier power 20-180 watts/channel.
OVERALL DIMENSIONS: 6 7/8" H X 20" W X 8 3/4" D (17.46CM H X 50.80CM W X 22.23CM D) OVERALL FREQUENCY RESPONSE: 55Hz - 27kHz.
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
CHERRY BLACK OAK
CSiA6
ARC PORT
A loudspeaker’s internal standing wave resonance can impart a “thick” or “chesty” character to the sound of voices. Polk Audio’s patented Acoustic Resonance Control Port System is tuned to cancel this resonance for utterly clear, accurate and natural midrange. See more about ARC Port at www.polkaudio.com/catalog/technology/.
CSiA4
polk
technology
6 RTi SERIES LOUDSPEAKERS
SURROUND LOUDSPEAKERS
Two 1" silk/polymer composite dome tweeters per speaker for smoother response and better detail. A neodymium magnet with low-viscosity ferro-fluid cooling and a heat sink on the back of the tweeter assembly, create better power handling and reliability. Mirrored, triangular cabinets that aim drivers and tweeters in opposing directions to produce a more enveloping sound field and wide, lifelike surround­sound effects. PowerPort with integral wall mount reduces turbulence at the mouth of the port, while allowing simple wall-mounting. 5-way binding posts accept a variety of wiring connectors and speaker cable up to 10 AWG. ARC (Acoustic Resonance Control) Port reduces midrange “boom” for clear, natural mids. Bipole/Dipole switch for the most flexible placement options and highest performance surround effects. Available in black or white laminate finishes and grilles. Two anti-diffraction grilles per speaker minimize grille diffraction for spacious, 3 dimensional imaging.
F/Xi A6
Flagship F/Xi series Bipole/Dipole surround speakers. 6 1/2" polymer composite Dynamic Balance mid/woofer with rubber surround. Recommended amplifier power 20-150 Watts/channel.
OVERALL DIMENSIONS: 14 3/4" H X 13 3/8" W X 8 5/8" D (37.47CM H X 33.97CM W X 21.91CM D) OVERALL FREQUENCY RESPONSE: 45Hz - 27kHz.
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
BLACK MATTE WHITE
F/Xi A4
Compact Bipole/Dipole surround speakers. 5 1/4" Polymer Composite Dynamic Balance mid/woofer with rubber surround. Recommended amplifier power 20-150 Watts/channel.
OVERALL DIMENSIONS: 12" H X 11 3/8" W X 7 7/16" D (30.48CM H X 28.89CM W X 18.89CM D) OVERALL FREQUENCY RESPONSE: 50Hz - 27kHz.
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
BLACK MATTE WHITE
polk
tec hnology
F/XiA6
CASCADE TAPERED ARRAY
Place two drivers near each other and interference between the two drivers creates frequency response errors (called “comb filtering”) for off-axis listeners; you won’t hear the same tonal balance as listeners who are “on-axis” in the center of the listening area. Polk Audio multi-driver speakers, combat this with “Cascade Tapered Array” crossovers. One driver is “crossed over” at a lower frequency than the other driver, filtering out the frequencies where the interference will occur. The Cascade Tapered Driver Arrays in select Polk multi-driver speakers produce clearer, more detailed sound and uniform tonal balance throughout the room. The sound is consistently accurate whether the listener is standing or sitting, in-line or off-axis. See more about Cascade Tapered Driver Array at www.polkaudio.com/catalog/technology/.
F/XiA4
WWW.POLKAUDIO.COM 7
SEVEN WAYS TO ENJOY GREAT SOUND
The OWM3 is a dedicated surround/satellite that’s about as unobtrusive as an on-wall speaker can be. Equally capable of being part of a 2.1 2nd zone system, or as a multi-channel surround system, the OWM3’s unique curved design and removable base make it easy to mount in a corner or simply place on a table. In fact, with the OWM3 you have seven different mounting possibilities, which makes it about the most versatile surround speaker anywhere.
1. ANGLED WALL MOUNT
2. CORNER MOUNT
OWM3
Stunning curved design and removable base make it easy to mount on a wall, on a ceiling, in a corner, or simply place on a table. Capable of being part of a 2.1 second zone system, or as a 5.1, 6.1or 7.1 channel surround system. 4 1/2" (114mm) Dynamic Balance composite cone driver is lightweight yet stiff, with good damping for high efficiency, excellent mid-bass and low distortion. 1" (25mm) dome tweeter delivers clear and detailed highs. Capacitive Coupling bass technology for low frequency response that’s truly surprising given the speaker’s ultra compact size. Super dense glass-filled ABS creates an acoustically inert cabinet, insuring an extremely clean and low coloration midrange response. 5-way gold-plated binding posts for the most secure hook-up options.
OVERALL DIMENSIONS: WITHOUT STAND: 10"HX7"WX4"D (25.4 CM H X 17.8 CM W X 10.4 CM D) WITH STAND: 10" H X 7" W X 4 11/16" D (25.4 CM H X 17.8 CM W X 11.9 CM D) PRODUCT WEIGHT: 4.4 LBS (2.0 KG)
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
3. HORIZONTAL WALL MOUNT
4. VERTICAL WALL MOUNT
5. SHELF MOUNT
6. HORIZONTAL SHELF MOUNT
7. STANDARD ARTICULATING WALL MOUNT BRACKET (NOT INCLUDED)
WHITE BLACK PAINTABLE PAINTABLE
OWM3
CAPACITIVE COUPLING
Capacitive Coupling Technology (CCT) works by creating a gentle impedance dip within the range where conven­tional sealed-box loudspeakers are subject to severely reduced bass output. Lower impedance within this critical frequency range means improved acoustic sensitivity by exploiting power amplifiers’ ability to deliver more power to the bass frequencies. Thus, the OWM3 plays surprisingly loud over the lowest portion of its passband. The net result for the OWM3’s performance is 3dB more bass output over a fairly broad range. It’s as if the loudspeaker’s enclosure grew by 30 to 50% in volume. And it’s why you’ll be astonished by just how loud and how low a satel­lite/surround loudspeaker this compact goes.
polk
technology
RTi SERIES LOUDSPEAKERS PRODUCT SPECIFICATIONSRTi SERIES LOUDSPEAKERS PRODUCT SPECIFICATIONS
FLOORSTANDING LOUDSPEAKERS RTi A9 RTi A7 RTi A5
Driver Complement 3 - 7" (17.78cm) Polymer Composite woofers 2 - 7" (17.78cm) Polymer Composite woofer 2 - 6 1/2" (16.5cm) Polymer/Mica Composite
2 - 5 1/4" (13.3cm) Dynamic Balance mid/range cone 1 - 6 1/2" (16.5cm) Dynamic Balance Cone with Rubber Surround,
- 1" (2.54cm) Silk Polymer Composite Dome 1 - 1" (2.54cm) Silk Polymer Composite Dome 1 - 1" (2.54cm) Silk Polymer Composite Dome
1
requency Response: Overall / -3dB Limits 18Hz - 27kHz / 30Hz - 26kHz 20Hz - 27kHz / 35Hz - 26kHz 30Hz - 27kHz / 40Hz - 26kHz
F
Impedance compatible with 8 Ohm outputs compatible with 8 Ohm outputs compatible with 8 Ohm outputs
Recommended Amplification 50 - 500 Watts/channel 20 - 300 Watts/channel 20 - 250 Watts/channel
Efficiency 90dB 89dB 90dB
Available Finish black oak or cherry veneer black oak or cherry veneer black oak or cherry veneer
CabinetDimensions 485/8"Hx87/8"Wx213/8"D 421/4"Hx87/8"Wx177/8"D 401/4"Hx87/16"Wx153/4"D
23.51cm H x 22.54cm W x 54.29cm D 107.31cm H x 22.54cm W x 45.40cm D 102.23cm H x 21.43cm W x 40.01cm D
1
eatures PowerPort Plus PowerPort Plus, ARC Port PowerPort, ARC Port
F
BOOKSHELF LOUDSPEAKERS RTi A3 RTi A1
river Complement 1 - 6 1/2" (16.5cm) Polymer Composite Dynamic 1 - 5 1/4" (13.3cm) Polymer Composite Dynamic
D
Balance Cone with Rubber Surround, Balance Cone with Rubber Surround,
1 - 1" (2.5cm) Silk Polymer Composite Dome 1 - 1" (2.5cm) Silk Polymer Composite Dome
Frequency Response: Overall / -3dB Limits 40Hz - 27kHz / 50Hz - 26kHz 50Hz - 27kHz / 60Hz - 26kHz
Impedance compatible with 8 Ohm outputs compatible with 8 Ohm outputs
Recommended Amplification 20 - 125 Watts/channel 20 - 125 Watts/channel
Efficiency 89dB 89dB
Available Finish black or cherry veneer black or cherry veneer
Dimensions 14 3/4"Hx87/16"Wx14"D 12"Hx73/8"Wx111/2"D
37.47cm H x 21.43cm W x 35.56cm D 30.48cm H x 18.73cm W x 29.2cm D
Features PowerPort, ARC Port, built-in wall mount PowerPort, ARC Port, built-in wall mount
CENTER CHANNEL LOUDSPEAKERS CSiA6 CSiA4
Driver Complement 2 - 6 1/2" (16.5cm) Polymer Composite Dynamic 2 - 5 1/4" (13.3cm) Polymer Composite Dynamic
Balance with rubber surround, Balance with rubber surround,
1 - 1" (2.5cm) Silk Polymer Dome Tweeter 1 - 1" (2.5cm) Silk Polymer Dome Tweeter
Frequency Response: Overall / -3dB Limits 45Hz - 27kHz / 55Hz - 26kHz 55Hz - 27kHz / 65Hz - 26kHz
Impedance compatible with 8 Ohm outputs compatible with 8 Ohm outputs
Recommended Amplification 20 - 200 Watts/channel 20 - 180 Watts/channel
Efficiency 90dB 89dB
Magnetically Shielded yes yes
Available Finish black oak or cherry veneer black oak or cherry veneer
Dimensions 7 3/4" H x 24" W x 14" D 6 7/8" H x 20" W x 8 3/4" D
19.68cm H x 60.96 cm W x 35.56 cm D 17.46cm H x 50.80cm W x 22.23cm D
Features vented with dual PowerPort vented with dual PowerPort
and single ARC Port and single ARC Port
SURROUND LOUDSPEAKERS F/XiA6 F/XiA4
Driver Complement 1 - 6 1/2" (16.5cm) Polymer Composite Dynamic 1 - 5 1/4" (13.3cm) Polymer Composite Dynamic
Balance with rubber surround, Balance with rubber surround,
2 - 1" (2.5cm) Silk Polymer Dome Tweeter 2 - 1" (2.5cm) Silk Polymer Dome Tweeter
Frequency Response: Overall / -3dB Limits 45Hz - 27kHz / 55Hz - 26kHz 50Hz - 27kHz / 60Hz - 26kHz
Impedance compatible with 8 Ohm outputs compatible with 8 Ohm outputs
Recommended Amplification 20 - 150 Watts/channel 20 - 150 Watts/channel
Efficiency 88dB 88dB
Available Finish black or white black or white
Dimensions 14 3/4" H x 13 3/8" W x 8 5/8" D 12" H x 11 3/8" W x 7 7/16" D
37.47cm H x 33.97cm W x 21.91cm D 30.48cm H x 28.89cm W x 18.89cm D
Features vented with single port vented with single port
SURROUND LOUDSPEAKERS OWM3
Driver Complement 1 - 4 1/2" (11.4cm) Dynamic Balance Driver; 1 - 1" (2.5cm) Silk Dome Tweeter
Frequency Response: Overall / -3dB Limits 80Hz - 25kHz / 100Hz - 24kHz
Impedance 4 Ohms
Recommended Amplification 20 - 100 Watts
Efficiency 89dB
Continuous Power 100 Watts
Dynamic Power 200 Watts
Available Finish matte black (paintable) or matte white (paintable)
Product Weight / Shipping Weight 4.4 lbs with stand each / 10.28 lbs pair
(2.0 kg with stand each / 4.66 kg pair)
Dimensions 10" H x 7"Wx4"D(25.4cm H x 17.8cm W x 10.4cm D without stand)
10" H x 7" W x 4 11/16" D (25.4cm H x 17.8cm W x 11.9cm D with stand)
* Magnetically shielded components for safe placement near TVs or video monitors.
We’re fanatics when it comes to providing you useful, accurate information that can help you evaluate our products. But as we all know, we live in an imperfect world. At least some of us do. That’s why performance specifications and product dimensions are subject to change without notice. For the most current specifications see our website, www.polkaudio.com/home.
Polk Audio is a Directed Electronics company which trades on NASDAQ under the symbol DEIX. Investor information can be found at http://investor.directed.com.
Polk Audio, Polk, PowerPort, Dynamic Balance, F/X, Atrium, Big Speaker Sound Without The Big Speaker, High Velocity Compression Drive, Acoustic Resonance Control, ARC Port, Casket Basket, I-Sonic, SurroundBar & SDA are registered trademarks of Britannia Investment Corporation used under license by Polk Audio, Incorporated. Polk Audio Designs & miDock are trademarks of Britannia Investment Corporation used under license by Polk Audio, Incorporated.
RTi SERIES LOUDSPEAKERS REAL WOOD, REAL HIGH PERFORMANCE
Polk Audio is an award-winning designer and manufacturer of high performance audio products and the largest audio brand of Directed Electronics, Inc. ( Johns Hopkins University graduates, Polk Audio holds over 50 patents for advances in audio design and technology. Polk’s products include loudspeakers and electronic components for home, auto and marine applications, the first satellite radio home component tuner, the world’s first audiophile-grade active IP-addressable loudspeaker, the first THX
®
loudspeaker and I-Sonic
—the first Entertainment System to include HDTMRadio, XM®Connect & Play capability and a DVD player. Polk products are available through authorized specialist consumer electronics retailers worldwide. For more information and the location of a Polk retailer or distributor in your area, visit www.polkaudio.com or call us at 1-800-377-7655 (USA and Canada). Outside of North America call +1 (410) 358-3600.
NASDAQ, DEIX). Founded in 1972 by three
®
Ultra2 Certified in-ceiling
POLK AUDIO
5601 METRO DRIVE BALTIMORE, MD 21215
WWW.POLKAUDIO.COM
CUSTOMER SERVICE: 800-377-7655 (USA & CANADA) 410-358-3600 (WORLDWIDE)
COPYRIGHT© APRIL 2008 ALL RIGHTS RESERVED.
Loading...