Polk Audio ATRIUM50BK, FXi 50 User Manual
50
Owner’s
ATRIUM
Manual
Multi-Application
Weatherproof
Indoor/Outdoor
Loudspeakers
A
TRIUM
2
Get more information and exclusive accessories, visit www.polkaudio.com
PLACEMENT OPTIONS
The Atrium has a wide dispersion pattern,
and is very efficient. Your Atrium Series
speakers will deliver good sound quality
throughout a large listening area, but if you
really want high sound levels in an outdoor
setting, which has acoustic characteristics
that differ from those of indoor conditions,
we recommend multiple-pair setups.
You will maximize the useful life of your
Atrium speakers by placing them where they
will receive less exposure to the elements.
Look for the best overall compromise
between sound quality, convenience
and exposure.
Place the speaker in a corner for more bass output. Bracket
Coloque el altavoz en una esquina para obtener mayor
rendimiento de bajos. Soporte adosado a la pared lateral.
Platzieren Sie den Lautsprecher zur Gewährleistung stärkerer
Tiefen in einer Ecke an. Die Halterung wird an einer Seitenwand
Installez l'enceinte dans un coin pour
optimiser les graves. Fixez le support
FIGURE 1
attached to side wall.
au mur latéral.
befestigt.
Place the speaker close under an eave for more bass output.
Installez l'enceinte directement sous l'avant-toit pour opti
Bei Platzierung des Lautsprechers direkt unter einer Kante
oder einem Vorsprung werden die Tiefen weiter verstärkt.
Coloque el altavoz debajo y cerca
FIGURE 2
de un alero para obtener mayor
rendimiento de bajos.
miser les graves.
Place the speaker away from eaves and corners for less
Coloque el altavoz lejos de aleros y esquinas para obtener
-
Dégagez l'enceinte de l'avant-toit ou des coins pour dimin-
Schwächere Tiefen erhalten Sie, wenn Sie den Lautsprecher
von Kanten und Vorsprüngen entfernt aufstellen.
menor rendimiento de bajos.
For Customer Service, call 800-377-7655.
FIGURE 3
bass output.
uer les graves.
3
AINTING YOUR ATRIUM AW
P
LOUDSPEAKERS
You will need:
• A spray can of primer paint (Krylon
Sandable Spray Primer #1318)
• A spray can of the paint of your choice.
Choose exterior grade paint if you
plan to use the speakers outdoors
• A paperclip or corkscrew (for removing
the paintable grille)
• Masking tape
• Paint mask (to cover unpaintable parts—
not included. To make an easy paint mask,
use the grille as a template and cut a mask
from heavy, nonporous Kraft paper.)
ARING TO PAINT:
PREP
1. Separate the parts of the speaker. Remove
the brackets and bracket knobs. Remove
the grille by carefully hooking it with a
bent paper clip and pulling it gently away
from the cabinet [figure 4].
2. Mask off the binding posts on the back
of the speaker [figure 5], the end panels
and bracket knobs, and carefully mask off
the front of the speakers to protect the drivers and baffles while painting [figure 6].
The grille features an engraved logo pod.
You can mask this off or paint right over it.
Cubra con cinta de enmascarar los tornillos de presión ubicados en la parte de atrás del altavoz.
Decken Sie die Anschlussklemmen auf der Rückseite des Lautsprechers ab.
4
Get more information and exclusive accessories, visit www.polkaudio.com
Mask the binding posts on the rear of the speaker.
Masquez les bornes à l'arrière de l'enceinte.
FIGURE 5
Remove the grille using a paper clip.
FIGURE 4
Quite la rejilla con un sujetapapeles.
Retirez la grille en utilisant un trombone.
Entfernen Sie den Gitteraufsatz mit einer Büroklammer.
FIGURE 6
Mask the drivers and baffles.
Cubra con cinta de enmascarar los excitadores y los bafles.
Masquez les haut-parleurs et les écrans acoustiques.
Decken Sie die Treiber und Resonanzwände ab.
Loading...