Polaroid XAA 7 User Manual

Digital Photo Picture Frame

Operation

Manual

20070309

CONGRATULATIONS on your purchase of a Polaroid 7” LCD Digital Photo

Picture Frame. Please read carefully and follow all warnings and instructions in this User’s Manual and

those marked on the product before first use. Failing to follow these warnings could result in personal

injury or damage to the Digital Photo Picture Frame. Also, remember to keep this User’s Manual in a

convenient location for future reference.

Important: Save the original box and all packing material for future shipping needs.

IMPORTANT PRODUCT SAFETY INSTRUCTIONS

Proper Handling of the Digital Photo Picture Frame

Always handle the Digital Photo Picture Frame with care. Avoid touching the LCD screen as natural skin

oils are often difficult to remove.

Always position the Digital Photo Picture Frame on a stable and level surface. Unstable surfaces can cause

the Digital Photo Picture Frame to topple and fall, resulting in possible damage or injury.

Avoid exposing the Digital Photo Picture Frame to direct sunlight or high temperatures, which can damage

or shorten its useful life. Do not place the unit near heat sources such as radiators, heat registers, or other

appliances that generate heat. Orient the Digital Picture Frame away from direct sunlight to reduce glare.

Avoid exposing the Digital Photo Picture Frame to rain, water, moisture or high humidity. Do not place it

in a bathroom or kitchen near a sink or where it may come in contact with water.

Never place heavy or sharp objects on the LCD panel, frame, or power cord.

Overloading Outlets

Do not overload electrical power sources when using the Digital Picture Frame. Overloading wall outlets,

circuits, or extension cords can result in overheating, fire, or electric shock. Use only grounded or polarized

outlets.

Power Cord Protection

Minimize wear on the power supply cord. The power supply cord should be routed away from foot traffic

and contact with other objects. Do not route the power cord under rugs or carpeting. The cord should never

be severely bent, pinched, or twisted. Periodically inspect the power cord and each end of the cord for wear

or damage. Unplug and replace the cord if it is damaged.

Ventilation

Slots and openings on the Digital Photo Picture Frame are provided for ventilation purposes. To ensure

reliable operation of the product and to protect it from overheating, these openings must not be blocked or

covered. Keep the Digital Photo Picture Frame a minimum of four (4) inches away from any wall to assure

sufficient airflow and ventilation. Increased temperatures may cause fire or device failure.

To assure proper ventilation, do not block the openings by placing the Digital Photo Picture Frame on a

bed, sofa, rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or

enclosed rack, unless proper ventilation is provided.

Other Notices and Precautions

Caution: Never remove the plastic casing. There are no user serviceable parts inside. The Digital Photo

Picture Frame contains high voltage parts. You may be seriously injured if you touch them.

Do not attempt repairs yourself. The warranty does not cover repairs or attempted repairs by anyone not

authorized by Authorize Dealer. Refer all servicing and repairs to qualified service personnel.

If the Frame begins to emit smoke, an abnormal noise, or a strange odor, immediately turn it off and unplug

the power cord. Contact the Authorize Dealer Service Center.

If the Digital Photo Picture Frame will not be used for an extended period of time, unplug the power cord.

Cleaning the Digital Picture Frame

• MAKE SURE THE DIGITAL PHOTO PICTURE FRAME IS TURNED OFF

• NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR PLASTIC CASING

To Clean the Screen:

1. Wipe the screen with a clean, soft, lint-free cloth. This removes

dust and other particles.

2. If it still is not clean, apply a small amount of non-ammonia,

non-alcohol based glass cleaner on a clean, soft, lint-free cloth

to clean the screen.

To Clean the Plastic Casing:

1. Use a soft, dry cloth.

2. If it still is not clean, apply a small amount of non-ammonia,

non-alcohol based, mild non-abrasive detergent on a clean, soft,

lint-free cloth to clean the surface.