Film Data Sheet
T-89
Color Pack Film
3URIHVVLRQDO &RORU 3DFN )LOP
[
LQFK
[FP
7\SH
89
Film Speed
ISO 100/DIN 21
Format
1
3
/4 x 33/8 in. (8.3 x 8.6 cm)
Pack Film
Image Area
3
2
/4 x 27/8
Finish
Glossy
Exposures per Unit
10 exposures per pack
Development Time
90 seconds at 70-95°F (21-35°C)
in. (6.9 x 7.2 cm)
ILOP
Description
Medium-speed, medium-contrast, medium-grain, daylight and
electronic flash balanced (5500°K) color print film. It’s easy to use,
professional quality instant film, with sharp, bright, well-saturated
colors, anytime, every time.
Key Application
• Professional photography (proofing or final art)
• Passport/document photography
Compatible Hardware
• Cameras or instruments with CB-103 Back or OEM CB-80
or CB-100 Back (these holders are supplied by medium format
camera manufacturers such as Mamiya, Hasselblad, Konica,
Pentax, and Bronica)
• Polaroid Model 405 Film Holder
• MiniPortrait Cameras, such as M203, M403, and SPd 360.
Special Instructions
Viewing:
When evaluating the color balance of a print, use the same light
source under which the print is to be viewed as a finished product.
Laminating prints:
This film is NOT recommended for use with laminates requiring a
wet print to produce a photo-destruct bond.
Not for use for emulsion lift.
Alternative Product
• T-88
Processing Information
Temperature Proc. Equivalent Exposure
°F °C Time Film Speed Adjustment
(sec.) (ISO/DIN)
70-105 21-40 90 125/22 None
65-69 18-20 120 125/22 None
61-64 16-17 150 125/22 None
55-60 13-15 180 125/22 None
Caution
This film uses a small amount of caustic paste. If any paste appears, avoid contact with skin, eyes and mouth
and keep away from children and animals. If you get some paste on your skin, wipe it off immediately, then
wash with water to avoid an alkali burn. If eye contact occurs, quickly wash the area with plenty of water and
see a doctor. Keep discarded materials away from children, animals, clothing and furniture.
Limited Warranty
See information on the film box.
“Polaroid” and “Polacolor” are trademarks of Polaroid Corporation, Waltham, MA 02451 USA.
All other product names may be the property of their respective owners.
Film Data Sheet
Technical Data
T-89
Instant Color Peel-Ap art Film
The information in this data sheet
represents the typical performance
of Polaroid’s 89 color film. Specific
film lots may vary .
Sample Density
Characteristic H&D Curves for Normal Development
Recommended speed:
ISO/DIN 125/22
Recommended processing
tim e and tem perature:
90 sec onds at 70
o
-35oC)
(21
Balance:
Dayli ght and electronic
flash (5500
Contrast:
Medium
o
o
-95oF
o
K)
Relative Log Exposure
Characteristic H&D Curves for Cold Development
Sample Density
Relative Log Exposure
Characteristic H&D Curves for Hot Development
Sample Density
Relative Log Exposure