Polaroid PZ2320AF User Manual

3107115B

Contents

o Precaution / Care and Storage P3 o Nomenclature (Description of parts) P4~7 o Operations:

Attaching the strap / Loading the batteries P8 Power On/Off / Battery check P9 Date / Time adjustment P10 Loading the film P11

o Taking picture P12

©Auto Focus P13 ©Mode selection

Auto Flash mode / Fill-in flash / Flash off P14 Landscape / Night scene P15 Red-eye Reduction / Self-timer P16

©Rewinding the film P17

o Specifications P18~19

Red-eye reduction DX setting Self-timer Night scene mode Date Imprinting Film winding Film rewinding

Power Source Dimension Weight

High light LED ISO 50 - ISO 3200 10 seconds delay Yes Built-in type Automatic winding (1) Automatic rewinding (2) Power mid-roll rewinding AA Alkaline battery x 2 pcs 115mm (W) x 67mm (H) x 38mm (D) 185g

Specifications and designs are subject to change without notice.

Introduction

Thanks for buying this 2.4x zoom camera. Before using the camera, please read this instruction manual thoroughly to ensure correct use.

This camera is confirmed to comply with the requirements set out in the council directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility..

Specifications

Precaution / Care and Storage

Type

Film format Focusing Focusing range

Lens

Exposure control Viewfinder Shutter speed Flash

135mm (38-90mm) (effective zoom range 38mm~85mm) with LCD display 24 x 36mm Active infrared auto focus system Auto mode----- Wide: 0.9m~infinity

Tele: 0.9m~infinity 38mm (F7.0) to 90mm (F10.5) (effective zoom range 38mm~85mm) 4 element 4 groups zoom lens "5 steps Zoom, 2 retractable barrel sections" Programmed AE shutter Real image zoom finder with AF marks 1/1.4~ 1/360 second Three-way Flash Recycle time arround 7 seconds

Flash range W:0.9-2.7m T:0.9-2.3m GNO W:11.5 T:15

Red-Eye reduction - Built-in, lamp will light for a period 1.0 seconds before the flash.

1. Press mode button until red-eye reduction mark " " shown on LCD panel

2. Shooting with flash mode in dark places, the subject's eyes may appear red in the picture. This phenomenon is known as "red-eye" and occurs when flash reflects back from the retina. This mode can contract the pupils of the subject and reduce the chances of red-eye.

3. As there is a delay effect for the red-eye reduction lamp to function, please press the button and hold the camera steady until shutter releases.

Self-timer

1. Press the " " button until the " " mark appears on the LCD. This mode allows you to join the picture you are taking with the camera on a steady support.

2. Press the shutter release button.

3. The self-timer lamp will light up for approx. 7 seconds, then blink for approx. 3 seconds. After that, the shutter will release. It could combine with all kinds of the flash modes.

4. If you wish to stop the self-timer operation once it has been activated, press the power or button again.

face of lens when

In order to get the best performance from this sophisticated designed camera and keep safe-use of it, the following needs to be specially noticed:

1. The camera is not water resistant, and should not be used outdoors if it's raining or snowing.

2. Protect the camera from dust, moisture, sudden impact, and excessive heat.

3. Don't attempt to disassemble the camera yourself, since there is high-voltage circuitry inside.

4. Please use a lintless cloth to clean gently in one direction on the sur cleaning. Do not use chemically treated tissues intended for cleaning eyeglasses.

5. The battery may be shorted when exposed to high temperature, or disposed of in fire.

6. Remove the battery when the camera is not used in a long time.

7. Keep batteries away from children.

8. Keep the auto-focus windows clean to ensure accurate focusing. If they get dirty, wipe them clean with soft cloth.

9. Pad the button of the camera with foam-rubber when traveling in a car, ship, or airplane. Violent vibration could cause damage to the camera.

10.Make sure the tripod screw fits the camera before installing.

Zoom button (Wide / Tele)

AF Lamp

Finder eyepiece

Spool Film Tip

Back cover switch

Back cover

Film pressure plate

Film check window

Film cartridge chamber Battery cover

DX contacts

Tripod socket

Multi-Mode Operation

1. Auto flash (no any symbol) 2. Red-eye reduction mode

3. Fill-in flash mode 4. Flash off mode

5. Landscape mode 6. Night Scene mode

Auto Flash - The camera will flash automatically when in a low light.

Fill-in Flash mode: Press the Mode button until " " is displayed on the LCD. The

flash will fire whenever taking pictures. In backlit situations, it is recommended to use this mode.

Flash off mode: Press the Mode button until " " is displayed on the LCD. The flash will not fire even in a low light. When you don't want to use flash for a more nature effect or when the use of flash is forbidden in some places.

* It is recommended to use a tripod (tripod socket) or place the camera on another firm

support when taking pictures in dark places.

Viewfinder

Picture Frame

AF (Auto Focus lock) frame mark

AF frame mark: Place the AF frame over the subjects you want to take.

ess the power button. When power is on, the lens cap will open and LCD is set to

Taking pictures

1. Turn on the power. When you turn the camera on, the lens cover automatically opens.

2. Hold the camera steady with both hands, and be sure not to block the flash, autofocus window or lens with your fingers.

3. If you want to enlarge the subjects, press the zoom Tele (T) button, and press Wide (W) button to take wide-angle shots. The lens can be zoomed out and in at 5 positions between Tele and Wide freely subject to user's selection.

* Focus range: 0.9m~°¤

4. Look through the finder eyepiece and compose your subjects within the AF frame mark.

5. Press the shutter release button halfway, and the AF (green) lamp will light up in the same time, then fully press it to take a picture.

Note:

When " " on the LCD panel is blinking, which indicates the flash is charging. After the blinking stops, you can continue taking the next picture. * DX setting: Method: Automatically setting by reading DX code (when using DX film) Film sensitive setting: ISO 50~ISO 3200.

Power on/off

Pr auto mode. Note: The power will be turned off automatically after being idle for 7 minutes.

Checking the battery power

The battery power shows on the LCD by the indicator anytime. 1 : Battery in good condition 2 : Replace battery with a new one 3 : The battery has run out. No function can be used except the film rewinding.

* Battery can be replaced if there is a film inside.

+ 8 hidden pages