Polaroid PTV430 User Manual

PTV430: User Manual

21.8”

4.3” LCD Display

Portable Digital TelevisionPortable Digital Television

PTV430

User Manual

Digital TV

Adaptor

Mini USB to

Female USB Cable

Headphones

External Antenna

Strap

4.3” LCD Display

Portable Digital TelevisionPortable Digital Television

PTV430

User Manual

LCD screen

[home] button

[menu] button

[OK] button / Confirm choice

[vol-] button / Scroll left

[ch+] button / Scroll up

[vol+] button / Scroll right

[ch-] button / Scroll down

[guide] button

10.

[info] button

11.

Speaker

12.

[POWER] on/off button

13.

INPUT 5V jack

14.

Retractable DTV antenna

15.

External antenna jack

16.

Mini USB jack

17.

Micro SD card slot

18.

3.5mm headphone jack

19.

Internal Battery compartment

20.

TV kickstand (pull)

Menu navigationLocation of controlsIncluded

2 3

6 75

vol+

14 15

When the TV is first turned ON, the main menu appears. To get back to the main menu at any time, press the [home] button. Use the following buttons to navigate the menus and submenus:

Button [menu] [home]

[ch + / ▲]

[ch - / ▼]

[vol - / ◄]

[vol + / ►]

[OK]

1. While viewing the main menu, use the ▲ or ▼ buttons to change the main menu display style.

2. Use the ◄ or ► buttons to select from the following main menu options,

then Press the [OK] button to confirm your choice:

DTV – watch Digital Television

Slideshow – watch a slideshow of pictures with music (optional)

FM radio – listen to FM radio

Music – listen to music files

Video – watch video files

Browse – browse all files

Settings – change the TV settings

Note: If there is no memory card in the TV or USB storage device attached to the TV then the Slideshow, Music, Video or Browse functions will not work.

open current menu / return to previous menu

return to TV main menu

move the selection up

move the selection down

move the selection left

move the selection right

Function

confirm a selection

You can use the TV as a slideshow picture frame with music playing (music is optional). You must have a memory card inserted and/or a USB storage device attached, with picture and music files (optional), for the slideshow function to work.

• Supported picture file types are JPEG, GIF and BMP.

• Supported music file types are MP3 and WMA.

• Supported memory card type is Micro SD.

1. Insert a memory card into the card reader slot and/or attach a USB storage device to the mini USB jack on the TV (see “Getting started: Connecting to a USB device”).

2. Press the [home] button, the main menu appears.

3. Use the ◄ or ► buttons to scroll to “Slideshow”, then press the [OK]

button to confirm. The Slideshow home screen will open showing your picture thumbnails.

4. Use the navigation buttons to select a starting point for the slideshow, then press the [OK] button to confirm.

5. Use the ▲ or ▼ buttons to switch between different slideshow playback modes, then press the [OK] button to start the slideshow.

6. If there is music on the memory card, it will play in the background. You may adjust the volume at any time during the slideshow.

Slideshow Music

Slideshow playback menu

1 2 3 4 5 6 7 8

1. Skip to the previous picture

2. Skip to the next picture

3. Rotate current picture 90 degrees

4. Play or pause the slideshow

5. Adjust the volume (select then use the [vol+ or vol-] buttons)

6. Adjust the brightness

7. Display picture information

8. Zoom the current picture

1. During the slideshow, press the [OK] button to open the slideshow playback menu.

2. Use the ▲ and ▼ buttons to select from the different playback options, then press the [OK] button to confirm your choice.

3. To resume slideshow playback, select the “Play” option from the menu, then press the [OK] button to confirm.

Slideshow sub menu

Exit Picture Information Switch storage device

1. During the slideshow, press the [menu] button twice to open the slideshow

submenu.

2. To switch between the memory card and USB storage device, select the “Switch storage device” option, then press the [OK] button to confirm.

3. To exit the slideshow, select the “Exit” option, then press the [OK] button to confirm.

You can use the TV as a music player. You must have a memory card inserted and/or a USB storage device attached (with music files) for the music function to work.

• Supported music file types are MP3 and WMA.

• Supported memory card type is Micro SD

1. Insert a memory card into the card reader slot and/or attach a USB storage

device to the mini USB jack on the TV (see “Getting started: Connecting to a

USB device”).

2. Press the [home] button, the main menu appears.

3. Use the ◄ or ► buttons to scroll to “Music”, then press the [OK] button to

confirm. The “Select Storage” screen will open.

4. Use the navigation buttons to select the storage device you would like to

open (Micro SD or USB Device) then press the [OK] button to confirm.

5. Use the ▲ or ▼ buttons to scroll to the song you would like to play or

folder you would like to open and press the [OK] button to confirm.

6. If you opened a folder, use the navigation buttons to select a song you would

like to play and press the [OK] button to confirm.

Note: To play music stored in a folder, you must first open that folder, then select a song within that folder and the TV will play all of the music in that folder. If a song is selected that is not in a folder, the TV will play all songs that are not in folders.

Music playback menu

While music is playing, the music playback menu is displayed at the bottom of

the screen:

1. Play or pause the music

2. Stop playing music and return to the play list

3. Play the previous track

4. Play the next track

5. Rewind ten seconds

6. Fast forward ten seconds

7. Adjust the volume (select then use the [vol+ or vol-] buttons)

8. Display the music track information

9. Switch the playback mode

1. Use the ◄ or ► buttons at any time to choose from the music playback options, then press the [OK] button to confirm your choice.

2. To adjust the music volume, you must select the “Adjust Volume” option ( ) from the playback menu, then use the [vol- or vol+] buttons to lower or raise the volume.

3. To stop playback and return to the music menu, press the [menu] button at any time or select “Stop” from the music playback menu.

4. To exit “Music” and return to the main menu, press the [menu] button repeatedly until the main menu appears OR press the [home] button.

Note: To adjust the volume in Music or Video mode, you must select the “Adjust Volume” option from the playback menu and use the [vol- or vol+] buttons to lower or raise the volume.

3 652 4

8 97

Included

Getting started

Charging

support.

IP Holdings, LLC does not manufacture this product or provide any Manufacturer’s Warranty or

Polaroid and Polaroid & Pixel are trademarks of PLR IP Holdings, LLC, used under license. PLR

www.polaroid.com

This TV contains a built-in, rechargeable battery. You may charge the TV while in use or while powered OFF by using the included AC adaptor.

1. Connect the AC adaptor to the INPUT 5V jack on the TV and plug it into a wall receptacle.

2. Charging time depends on whether the TV is ON during charging or powered OFF.

• If the TV is ON - the charge time is approximately 7 hours.

• If the TV is OFF - the charge time is approximately 5 hours.

Using the antenna(s)

Before scanning for channels or watching Digital Television, you must pull out the retractable DTV antenna to its fullest length in order to maximize the

reception signal.

1. Pull the retractable antenna out from the TV and extend it to its fullest length.

2. The extended antenna can be rotated and set in different directions to maximize the TV reception.

3. When not watching television, retract the antenna.

4. If the television signal is weak or reception is poor, adjust the position of the antenna and/or relocate the TV (see “DTV - Scanning for channels”).

2 2

Connecting to a USB device

This TV has Mini USB jack which allows you to attach a USB device so you can view music, videos, and pictures. Most USB devices come with a Mini

USB to USB cable to connect to a computer.

To attach your USB device to the TV:

1. Insert the large USB tip of your device’s cable into the large USB tip of the supplied cable.

2. Attach either Mini USB tip to the TV’s Mini USB jack.

3. Attach the other Mini USB tip to your device’s Mini USB Jack.

4. The TV can now read your device (see Slideshow, Music, Videos,

and/or Browse).

USB memory stick

INPUT 5V

AC Adapter

3. When the battery strength is low, the TV will display the following icon on the lower right portion of the LCD screen: , this means it is time to

recharge the battery immediately.

AC Outlet

5. If reception is weak or you are receiving few channels, then connect the external antenna to the external antenna jack on the side of the TV and

rescan for channels (see DTV - Scanning for channels).

supplied USB cable

USB storage device

Note: Before using the TV for the first time, you must charge the battery for 12 hours. As well, if the TV has not been used for more than a month, you should charge the battery for 12 hours.

Note: Compatible USB devices are memory sticks and USB mass storage devices (external hard drives).

You can use the TV to watch videos stored on a memory card or USB storage device. You must have a memory card inserted and/or a USB storage device attached (with video files) for the video function to work.

• Supported video file types are MPEG, AVI and DAT.

• Supported memory card type is Micro SD.

1. Insert a memory card into the card reader slot and/or attach a USB storage device to the mini USB jack on the TV(see “Getting started: Connecting to a USB device”).

2. Press the [home] button, the main menu appears.

3. Use the ◄ or ► buttons to scroll to “Video”, then press the [OK] button to

confirm. The “Select Storage” screen will open.

4. Use the ▲ or ▼ buttons to select the storage device you would like to open (Micro SD or USB Device), then press the [OK] button to confirm.

5. Use the navigation buttons to scroll to the video you would like to play or folder you would like to open and press the [OK] button to confirm.

6. If you opened a folder, use the navigation buttons to select a video you would like to play and press the [OK] button to confirm.

Videos

Note: To play videos stored in a folder, you must first open that folder, then select a video within that folder and the TV will play all of the videos in that folder. If a video is selected that is not in a folder, the TV will play all videos that are not in folders.

Video playback menu

While a video is playing, the video playback menu is displayed at the bottom

of the screen:

6 8 95 71 2 3 4

1. Play or pause the current video

2. Stop the current video

3. Skip to the previous video

4. Skip to the next video

5. Rewind ten seconds

6. Fast forward ten seconds

7. Adjust the volume (select then use the [vol + or vol -] buttons)

8. Adjust the brightness

9. Switch the playback mode

10. Change the subtitle language (if applicable)

11. Audio mode

12. Full screen mode

1. Use the ◄ or ► buttons at any time to choose from the video playback options, then press the [OK] button to confirm your choice.

2. To adjust the video volume, you must select the “Adjust Volume” option ( ) from the playback menu, then use the [vol- or vol+] buttons to lower or raise the volume.

3. To stop playback and return to the video menu, press the [menu] button at any time or select “Stop” from the music playback menu.

4. To exit “Video” and return to the main menu, press the [menu] button repeatedly until the main menu appears OR press the [home] button.

10 11 12

FM Radio

You can use the TV as a FM Digital Radio. You must have headphones plugged into the TV for the FM Radio function to work.

FM radio homescreen

While listening to FM Radio, the following screen appears with the FM Radio

function menu along the bottom of the screen:

Favorite Channels

CD1 --[88.90]--

CD2 --[92.30]--

left

window

1. Skip backward to the next available radio station

2. Manual search backward on the radio frequency dial

3. Manual search forward on the radio frequency dial

4. Skip forward to the next available radio station

5. Adjust the volume (select then use the [vol+ or vol-] buttons)

6. Save the current station to the “Favorite Channels” list.

7. Scan and save all available stations (the available stations

will be listed in the right window where you can use the navigation buttons to select a station)

1. Insert headphones into the headphone jack on the TV.

2. Press the [home] button, the main menu appears.

3. Use the ◄ or ► buttons to scroll to “FM Radio”, then press the [OK]

button to confirm.

CD3 --[94.80]--

CD4 --[102.50]--

CD5 --[105.90]--

CD6 --[107.90]--

101.50MHZ

right window

1 2 3 4 5 6 7

4. Use the ◄ or ► buttons to select an option from the FM Radio menu along the bottom of the screen, then press the [OK] button to confirm your choice.

5. To adjust the FM radio volume, you must select the “Adjust Volume” option ( ) from the playback menu, then use the [vol- or vol+] buttons to lower or raise the volume.

To store stations individually in the “Favorite Channels” list:

1. Use the ▲ and ▼ buttons to select a slot in the “Favorite Channels” list.

2. Use the ◄ or ►buttons to select from one of the 4 search modes along the bottom of the screen, then use the [OK] button to find a station you would like to save.

3. Use the ◄ or ► buttons to scroll to the “Save Station” icon ( ) then press the [OK] button to save the station. The station you saved will now be shown in the “Favorite Channels” list on the left of the screen.

To scan for all available channels and store them in the scan list

1. Use the ◄ or ► buttons to select the scan and save icon ( ) then press the [OK] button to confirm.

2. Wait for the TV to finish scanning for radio stations. When finished scanning,

the available radio stations will be stored in the window on the right.

3. Use the ▲ and ▼ buttons to scroll through the available stations.

4. Use the [OK] button to check or uncheck the stations you would like to save to the “Favorite Channels” list.

5. With scanned station(s) selected, press the ◄ button to save the checked station(s) to the “Favorite Channels” list (the window on the left).

6. To exit the scanning window and return to normal listening mode, press the ► button at any time.

7. To exit “FM Radio” and return to the main menu, press the [home] button

at any time.

The main menu has a settings tab where you can make changes to the overall settings of the TV.

31.2”

1. Press the [home] button at any time to enter the main menu.

2. Use the ◄ or ► button to scroll to “Settings” then press the [OK] button to confirm. The following screen will be displayed:

3. Use the ▲ or ▼button to scroll through the main menu settings options.

4. Use the ► button to open the submenus.

5. Use the ▲ or ▼ button to select an option you would like to make changes to, then press the [OK] button to confirm.

6. Press the ◄ or [menu] button to return to a previous menu.

7. Press the [home] button to return to the main menu at any time.

The TV will remember the settings until they are changed, even if the player is set to standby mode. To restore the TV settings to factory default:

1. Press the [home] button to enter the main menu.

2. Scroll to the “Settings”, then press the [OK] button to confirm.

3. Scroll down to “Reset”, then press the [OK] button to confirm.

4. Select “Yes”, then press the [OK] button to confirm.

Scanning for channels

WARNING: ATSC Digital tuners are not capable of receiving a signal while in motion. Do not use this TV in a moving vehicle.

The first time the television is turned on you must scan for available channels. You should also scan for available channels whenever you are in a new area or when reception is weak. Each locality broadcasts different channels and channel information so you should scan for new channels any time you have moved to a different area. The TV can store up to 68 channels and each channel has 8 possible sub-channels associated with it.

1. Make sure that the antenna is fully extended and press the [POWER] button. If the TV is already powered ON, then press the [home] button.

2. Use the ◄ or ► button to scroll to DTV on the main menu, then press the

[OK] button to confirm. When you select DTV for the first time, the following

screen will be displayed:

Setup Wizard

Select the antenna type then auto scan:

Air/Cable

Cable System

Go to next step:

3. If you would like to scan for channels and this screen does not appear then

press the [OK] button while in DTV viewing mode. The “Setup Wizard” screen appears.

4. If necessary, press the ► button on the TV to select “Air”.

5. Press the ▲ or ▼ button to scroll to “Go to next step”, then press the [OK] button to start scanning for channels. The TV will scan through all 68

channels then store all local channels and sub-channels into memory.

Air

Setup Wizard

RF CH : Found :

6. To stop the scanning process at any time, press and HOLD the [OK] button

for 3 seconds.

7. When finished scanning for channels, if the signal is weak or reception is poor,

adjust the position of the antenna and/or relocate the TV, then repeat the scanning process.

Note: Do not move or unplug the TV while scanning for channels as this will interrupt the scanning process and you will not receive all possible channels and sub-channels.

Program information guides

While watching television, you can access the information guide to display current, past and future programming information. Program information

and/or availability may vary by area depending on local service providers.

1. While watching TV, press the [info] button to display the information of the current channel and program:

Current channel

2.1

WCBS-HD

Current date & time

Monday, 26 July - 2010 06:55 PM

Resolution

CC Off

1920x1080

60 30

Audio mode Channel type

Audio 1/2 (L | R)

06:00AM - 07:00AM

Program time slot

Program name

Let’s Make a Deal

Signal strength

FTA TV-PG

Good

2. Press the [info] button again to display a description of the current program being viewed:

A series of devastating torandoes rips through Camden County, causing Earl to lose his list, a wild boat ride leads Randy to believe he is invincible, Mike and Darnell argue over which of them is the smart one in their relationship.

3. Press the [guide] button to display the Electronic Program Guide where you can view information on past, current or future programs and scroll through different channel information as well.

Current date

and time

Program time

and name

4. Use the ▲ or ▼ buttons to scroll through past or future program information of the current channel being viewed.

5. Use the ◄ or ► buttons to scroll through different channel information.

EPG

Monday, 26 July - 2010 06:55 PM

DTV

Previous available channel

9.2 WWOR-TV

My Name Is Earl

04:00AM-04:30AM Monday, 26 2010

TV RATING TV-14

A series of devastating torandoes rips

through Camden County, causing Earl

to lose his list, a wild boat ride leads

Randy to believe he is invincible,Mike

and Darnell argue over which of them

is smart one in their relationship.

9.1 11.1

Next available channel

Current Channel

Current program

Program time slot

TV Rating

Program

description

Browsing filesSettings - main menu DTV - digital television

You can use the TV to browse music, video or picture files on your memory card or USB storage device.

1. Insert a memory card into the card reader slot and/or attach a USB storage device to the mini USB jack on the TV.

2. Press the [home] button, the main menu appears.

3. Use the◄ or ► buttons to scroll to “Browse”, then press the [OK] button

to confirm. The “Browse” home screen will open where you can view all of your files.

4. To switch between the memory card and USB storage device at any time, press the [menu] button, then scroll to “Switch Storage Device”, then press the [OK] button to confirm.

5. As you scroll through the files or folders, the name of the file or folder is

displayed along the bottom left corner of the screen.

To browse video files

1. Open “Browse” from the main menu.

2. Use the navigation buttons to select a folder or video file and press the [OK] button to confirm. If you open a folder, then choose a video file within that folder to open.

3. The browser options are displayed on the screen. Use the ◄ or ► buttons to select a browse option, then press the [OK] button to confirm your choice.

Stop Volume Rewind Fast ForwardPlay / Pause

4. During playback, press the [OK] button to bring up the playback options.

5. To return to previous menus, press the [menu] button.

6. To exit to the main menu, press the [home] button at any time.

To browse picture files

1. Open “Browse” from the main menu.

2. Use the navigation buttons to select a folder or picture file, then press the [OK] button to confirm. If you open a folder, then choose a picture within that folder to open.

3. Press the [OK] button again to open the picture’s browse menu:

Exit to

4. To set a picture as the TV startup screen:

a. Select a picture and press the [OK] button to open the picture’s browser menu.

b. Use the navigation buttons to select “Set Picture to startup screen”, then press the [OK] button to confirm.

c. The TV will ask you to confirm to set this picture as a logo. Use the navigation buttons to choose Yes or No, then press the [OK] button to confirm your choice.

5. To return to previous menus, press the [menu] button to open the browser menu, then select “Exit”, then press the [OK] button to confirm.

6. To exit to the main menu, press the [home] button at any time.

Set picture

to startup

screen

Picture

information

Switch storage

device

To browse music files

1. Open “Browse” from the main menu.

2. Use the navigation buttons to select a folder or music file, then and press the [OK] button to confirm. If you open a folder, then choose a music file within that folder to open.

3. The browser options are displayed on the screen. Use the ◄ or ► navigation buttons to select a browse option, then press the [OK] button to confirm.

StopPlay/pause

4. To adjust the music volume, you must select the “Adjust Volume” option ( ) from the playback menu, then use the [vol- or vol+] buttons to lower or raise the volume.

5. To return to previous menus, press the [menu] button.

6. To exit to the main menu, press the [home] button at any time.

Adjust volume

Troubleshooting

No picture

The TV reception signal might be weak. Try scanning

for channels again or move the TV to a different

location and scan for channels.

No sound

Check that the volume is turned up and that

headphones are not plugged into the TV. Also, the

signal might be weak, try moving the TV to a new

location and scanning for channels again.

Poor reception

Try adjusting the antenna or scanning for

channels again.

Dark or blurred picture

Try adjusting the brightness and contrast in the

picture settings menu, also check that the battery is

charged enough. If the TV is not plugged in, use one

of the included adaptors to power the TV.

Unclear or unstable picture

Try adjusting the antenna or scanning for

channels again.

Snow in picture

Most likely a power interference issue such as radio

frequency, power lines, etc. is interfering with the reception. Try adjusting the antenna or moving the TV to a different location and scanning for channels again.

DTV - settings

There are 5 different DTV settings menus. You can change the DTV settings by

entering the different settings menus and using the following procedure to navigate them:

1. While in DTV mode, press the [menu] button to enter the DTV settings

menus.

2. Use the ◄ and ► buttons to scroll through the different DTV settings menus, then press the [OK] button to confirm and enter the settings menu of choice.

3. Use the ▲ or ▼ navigation buttons to scroll to the setting you would like to adjust.

4. Use the ◄ and ► navigation buttons to change the settings.

5. Press the [menu] button to confirm the changes, then press the [menu] button again to exit the settings menu and return to normal viewing.

Time settings:

Sleep Timer: Choose a set time for the TV to power off.

The sleep timer options are:

OFF / 5 / 10 / 15 / 30 / 45 / 60 / 90 / 120 /180 / 240 minutes

Time Zone: Set the time zone you are in

DST: Turn daylight savings time On or Off.

Time Format: Set the format of the clock. Choose between 12-hour or

24-hour formats.

Auto Sync: This synchronizes the time with the broadcasting station. This is not adjustable.

Clock: This synchronizes the date and time with the broadcasting station. This is not adjustable.

Picture settings:

Picture mode: Choose between Personal / Standard / Dynamic / Soft.

Contrast / Brightness / Sharpness / Tint / Color: You can adjust any of

these from 0-100.

Color mode: Choose between Personal / Normal / Warm / Cool.

Zoom mode: Choose between Normal or Wide viewing modes.

Normal Wide

Audio settings:

Audio Language: Choose between English / Spanish / French

(not available for all channels).

Balance: Adjust the audio from left to right.

Channel Settings:

Air / Cable: This is used to change the type of television signal. Always have this set to “Air” (Digital Television)

Auto Scan: Use this option to scan for channels when you are in a new area

or when reception is weak.

Show / Hide: When you have finished scanning for channels and you would

like to hide certain channels so they cannot be viewed, use this option. Scroll to the channel you would like to hide, then press the [OK] button.

Channel No.: Use this option to scroll through channels without closing the menu.

Channel Label: Use this option to change the label of the channel you are currently tuned to.

1. Use the ▲ and ▼ buttons to scroll through the different letters and symbols.

2. Use the ◄ and ► buttons to scroll through the label boxes.

3. Press the [OK] button to confirm your changes.

DTV signal: Shows the signal strength of the current channel’s Digital

TV signal.

Setup:

Menu Language: Change the language of the menus between

English / Spanish / French

Transparent: Change the transparency of the menus so you can view TV while menus are open.

OSD Time Out: Change the amount of time that the menus will close themselves between 5 / 15 / 30 / 45 / 60 seconds.

Closed Caption (CC): There are 4 submenus in Closed Caption:

1. CC Mode: Choose between CC off / CC on / CC on muted (no audio)

2. Basic Selection: Choose between the different CC types (how CC is displayed)

3. Advanced selection: Choose between the different advanced

modes of CC.

4. Option: Choose between different CC fonts and colors.

Restore Default: Reset all settings to factory default. If you have made changes and want to reset the TV to all original settings, select “Yes”.

Return to MM: Exit DTV and return to the main menu.

to prevent fire or shock hazard, do not use the plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

to reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

to prevent electrical shock, match wide blade plug to wide slot, fully insert.

CAUTION

RISK OF ELECTRIC SHOCK

NO T OP E N

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

warning: to reduce the risk of electric shock, do not remove cover (or back). no user serviceable parts inside. refer servicing to qualified service personnel.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

FCC Part 15:

This equipment has been tested and found to comply with the requirements

for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

● Re-orient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

Do not attempt to repair or modify this equipment. Warning: Changes or modifications to this equipment not expressly

approved by the party responsible for compliance could void the user’s authority to operate the equipment.

“This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”

Shielded USB cables must be used with this unit to ensure compliance

with the Class B FCC limits.

PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronic waste initiatives. As responsible stewards of the environment, and to avoid

violating established laws, you should properly dispose of this product in compliance with all applicable regulations, directives or other governances

in the area where you reside. Please check with local authorities or the

retailer where you purchased this product to determine a location where

you can appropriately dispose of the product.

You may also go to HYPERLINK "http://www.polaroid.com" www.polaroid.com and reference About / Electronic Recycling to learn

more about the specific laws in your area and to locate a collection facility near your home.

If your electronic device has internal memory on which personal or other confidential data may be stored, you may want to perform a data sanitization process before you dispose of your device to assure another party cannot access your personal data. Data sanitization varies by the type of product and its software, and you may want to research the best sanitization process for your device before disposal. You may also check with your local recycling facility to determine their data sanitization procedures during the recycling process.

Limited WarrantyLegal informationSafety precautions

This Product as supplied and distributed new by AIT, Inc. (“AIT”) to the original consumer purchaser is warranted by AIT against defects in material and workman- ship for a period of one year from your date of purchase (“Warranty”).

In the unlikely event that this product is defective, or does not perform properly, you may within one year from your original date of purchase return it to the authorized service center for repair or exchange.

TO OBTAIN WARRANTY SERVICE:

- Provide proof of the date of purchase within the package (Dated bill of sale)

- Prepay all shipping costs to the authorized service center, and remember to insure your return.

- Include a return shipping address (no P.O. Boxes), a telephone contact

number, and the defective unit within the package.

- Describe the defect or reason you are returning the product. Your product

will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping, will require you to file a claim with the carrier.

The shipping address of the authorized service center is:

AIT, Inc.

ATTN: Returns Department 14-C 53rd Street Brooklyn, NY 11232

IN NO EVENT WILL AIT, ITS MANUFACTURERS, DISTRIBUTORS OR PLR IP HOLDINGS, LLC BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) RELATED TO THIS PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.

Should you have any questions or problems concerning this product, please contact our customer service department at:

Customer Support:

 1-877-768-8483 (Toll Free)  polaroidsupport@southerntelecom.com

Monday - Thursday: 9AM - 5PM (EST) Friday: 9AM - 3PM (EST)

FRONT

BACK

Polaroid PTV430 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual