Polaroid PLA-4260MTR User Manual

42” High-Definition Plasma Monitor

PLA-4260MTR

Operation Manual

20050314

Table of Contents

Safety Precautions 3

Plasma Display

LED Indicators

Remote Control Unit 10

Installing the plasma Monitor 11

Basic Operation 12

Using the Remote Control 12

Basic Adjustments:

Video Source 13

PC Source 16

Settings Menu 19

Specifications 21

Troubleshooting

Safety Precautions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warning

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be placed on the apparatus.

Caution

To prevent electric shock, match wide blade of plug to wide slot, fully insert. Refer to the

identification/rating label located on the back panel of your product for its proper operating voltage.

Caution

Using video games or any external accessory with fixed images for extended periods of time can

The lightning flask with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

cause them to be permanently imprinted on the picture tube (or projection TV picture tubes). ALSO,

some network/program logos, phone numbers, etc. may cause similar damage. This damage is not

covered by your warranty.

Cable TV Installer

This reminder is provided to call your attention to Article 820-40 of the National Electrical Code

(Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding

and, in particular, specifies that the cable ground shall be connected to the grounding system of the

building as close to the point of cable entry as practical.

Customer Record

You will find the model number and chassis number of your TV on the back of your TV set. Record

these numbers in the spaces provided below. Refer to them whenever you call customer service or

your dealer regarding this product.

Model Number:_______________________

Chassis Number:______________________

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or third prong is

provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from

tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods

of time.

14. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

15. Warning - This product should only be serviced by an authorized and properly

trained technician. Opening the cover or other attempts by the user to service this

product may result in serious injury or death from electrical shock, and may

increase the risk of fire.

FCC Statement of Compliance

Class B Computing Device Information to User

This equipment has been tested and found to comply with the limits for a Class B

Digital Device pursuant to part 15 of FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment receives interference while off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) lncrease the separation between the equipment and the TV.

3) Connect the equipment into an outlet on a circuit different from that to

which the TV is connected.

4) Consult the dealer or an experienced radio/TV technician for help and for

additional suggestions.

The user may find the following booklet prepared by the Federal Communications

Commission helpful: "How to Identify and Resolve Radio - TV Interference

Problems". This booklet is available from the US Government Printing Office.

Washington, D.C. 20402, Stock No. 004-000-00345-4.

FCC Warning

The user is cautioned that changes or modifications not expressly approved by the

manufacturer could void the user's authority to operate the equipment.

NOTE: In order for an installation of the product to maintain compliance with the

limits for a Class B Device, shielded cables must be used.

Plasma Display

Front view

1 2 3

1. Status LED indicator

2. IR Receiver for remote control

Shown with optional Extension Speaker Cabinet &

Display Stand. (Sold Separately.)

3. Standby/on LED indicator

Right view

1. STANDBY/ON button

2. VOLUME +/- buttons (Not used in this application.)

3. CHANNEL +/- buttons (Not used in this application.)

4. INPUT button (Not used in this application.)

+ 15 hidden pages