Polaroid EZPRO 758 User Guide

PLEASE READ
We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners.
Visit the site to read the latest projector news and reviews, read and comment on projector specifications, download user manuals and much more.
Table of Contents
Table of Contents ....................................................................................... 1
Usage Notice .............................................................................................. 2
Precautions ......................................................................................................... 2
Introduction ................................................................................................ 4
Product Features ................................................................................................ 4
Package Overview ............................................................................................. 5
Product Overview ................................................................................................ 6
Main Unit ........................................................................................................................ 6
Control Panel ................................................................................................................ 7
Connection Ports .......................................................................................................... 8
Remote Control with Mouse Function & Laser Pointer ............................................... 9
Installation ............................................................................................... 10
Connecting the Projector .................................................................................. 10
Powering On/Off the Projector .......................................................................... 11
Powering On the Projector ......................................................................................... 11
Powering Off the projector .......................................................................................... 12
Warning Indicator ....................................................................................................... 12
Adjusting the Projected Image ......................................................................... 13
Adjusting the Projector Image Height ........................................................................ 13
Adjusting the Projector Zoom / Focus ....................................................................... 14
Adjusting Projected Image Size ................................................................................. 14
User Controls ............................................................................................ 15
Control Panel & Remote Control ..................................................................... 15
On-Screen Display Menus ............................................................................... 18
How to operate ............................................................................................................ 18
Language ..................................................................................................................... 19
Image-I (Computer Mode) .......................................................................................... 20
Image-I (Video Mode) ................................................................................................. 21
Image-II ........................................................................................................................ 22
Audio ............................................................................................................................ 24
Management ................................................................................................................ 25
PIP ............................................................................................................................... 27
Appendices .............................................................................................. 28
Troubleshooting ............................................................................................... 28
Replacing the lamp .......................................................................................... 32
Compatibility Modes ........................................................................................ 33
Ceiling Mount Installation ................................................................................. 34
... English
1
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recom­mended in this user’s guide to maximize the life of your unit.
Warning- Do not look into the projector’s lens when the lamp is
on. The bright light may hurt your eyes.
Warning- To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Warning- When changing the lamp, please allow unit to cool
down, and follow all changing instructions.
Warning- This product will detect the life of the lamp itself.
Please be sure to change the lamp when it shows warning messages.
English ...
Warning- Reset the “Lamp Reset” function from the On Screen
Display “Management-->Lamp” menu after replacing the lamp module (refer to page 26).
Warning- When switching the projector off, please ensure the
projector completes its cooling cycle before disconnecting power.
Warning- Turn on the projector first and then the signal sources.
Warning- Do not use lens cap when projector is in operation.
Warning- When the lamp reaches the end of its life, it will burn
out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the
2
Lamp”.
Usage Notice
Do:
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the
display housing.
Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Don’t:
Block the slots and openings on the unit provided for
ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
- In extremely hot, cold or humid environments.
- In areas susceptible to excessive dust and dirt.
- Near any appliance that generates a strong magnetic field.
- Place in direct sunlight.
... English
3
Introduction
Product Features
This product is an XGA single chip 0.7” DLPTM projector. Outstanding features include:
True XGA, 1024 x 768 addressable pixels
Single chip DLPTM technology
NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and
HDTV compatible (480i/p, 576i/p, 720p, 1080i)
HDCP compliant
High-tech DVI-I connection for digital and analog video
connectivity
Full function remote with mouse control and laser
pointer
User friendly multilingual on screen display menu
English ...
Advanced digital keystone correction and high
quality full screen image re-scaling
User friendly control panel
Picture-In-Picture dual image
UXGA, SXGA compression and VGA, SVGA re-sizing
Mac compatible
4
Introduction
Package Overview
This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing.
Projector with lens cap
Composite Video Cable
1.8m
S-Video Cable 1.8m
Documents :
User’s Guide
;
Quick Start Card
;
Warranty Card
;
Power Cord 1.8m VGA Cable 1.8m
DVI to D-Sub Cable
1.8m
Remote Control with
Mouse Function & Laser
Pointer
RCA Component Cable
for YPbPr 1.8m
2 x Battery
Carrying Case
... English
5
Introduction
Product Overview
Main Unit
2
5
4
1
3
English ...
8
6
7
1. Focus Ring
2. Zoom Ring
3. Elevator Button
4. Zoom Lens
5. Remote Control Receiver
6. Connection Ports
7. Power Socket
8. Control Panel
3
6
Control Panel
Introduction
1
8
7
5
1. Temp Indicator LED
2. Power Indicator LED
3. Lamp Indicator LED
4. Power/Standby
5. Source
6. Four Directional Select Keys
7. Enter
8. Keystone Correction
9. Menu (On/Off)
10. Re-sync
2
3
6
10
89
4
... English
7
Introduction
Connection Ports
1. DVI-I Input Connector (PC Digital and Analog signal/HDTV/ HDCP/Component Video Input )
2. VGA Connector (PC Analog Signal/HDTV/Component Video Input)
3. USB Input Connector
4. RS232 Input Connector
5. Monitor Loop-through Output Connector
6. Component Video Input Conntector
7. S-Video Input Connector
8. Composite Video Input Connector
9. Audio Input Connector
10. Audio Output Connector
11. Power Socket
12. Kensington
1
TM
Lock Port
3
4
2
6
7
5
11
98
10 12
English ...
8
Introduction
Remote Control with Mouse Function & Laser Pointer
1. IR LEDS
7
8
6 9
10
11
17
1
2. Power
3. Sync
4. Keystone Correction
5. Display Format
6. Laser Button
7. Laser Pointer
8. Laser Indicator LED
9. A/V Mute
2
10. Freeze
11. Display Mode
3
12. Mouse
4
13. Mouse Right Click
14. Mouse Left Click
5
15. Page Up / Page Down
16. Page Scrolling
12
17. Zoom In/Zoom Out
18. Four Directional Select Keys
19. OK (Enter)
13 14
20. Source Lock
21. Menu
22. VGA Source
15
23 DVI-I Source
24. Component Video Source
16
25. S-Video Source
26. Composite Video Source
18
21
23
20 24
19
25 22
26
... English
9
Installation
Connecting the Projector
Digital Tuner Output
DVI
8 4 2 9
7
RGB
USB
RS232
English ...
10
6
S-Video Output
1. ................................................................................................................... Power Cord
2. .................................................................................................................... VGA Cable
3. ............................................................................................. Composite Video Cable
4. ................................................................................................... DVI to D-Sub Cable
5. .............................................................................................................. S-Video Cable
6. .......................................................................... RCA Component Cable for YPbPr
7. ............. D-Sub to RCA Cable for HDTV/Component (Optional Accessory)
8. ............................................................... DVI to DVI Cable (Optional Accessory)
9. ......................................................................... RS232 Cable (Optional Accessory)
5
3
1
Video Output
To ensure the projector works well with your computer, please
set the display mode of your graphic card less than or equal to 1024 X 768 resolution. Make sure the timing of the display mode is compatible with the projector. Refer to the “Compatibility Modes” section on page 34.
Loading...
+ 25 hidden pages