Polaroid FLM-3232, FLM-2634B, FLM-2632M, FLM-2632, FLM-3734B User Manual 2

2006 LCD Models – North America

FLM-2632, FLM-2632M, FLM-2634B, FLM-3232, FLM-3232M, FLM-323B, FLM-3234B, FLM-3732, FLM-3732M, FLM-373B, FLM-3734B, FLX-374

SERVICE MANUAL

Bezel covers vary by model 20070411

Important Service and Safety Information

Prior to using this service manual, please ensure that you have carefully followed all the procedures outlined in the user's manual for this product.

(1)Read all of these instructions.

(2)Save these instructions.

(3)Follow all warnings and instructions marked on the product.

(4)Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners; use a damp cloth for cleaning.

(5)Do not use this product near water.

(6)Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.

(7)Slots and openings in the cabinet and the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating, those openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation unless proper ventilation is provided.

(8)This product should be operated from the type of power source indicated on the marketing label. If you are not sure of the type of power available, consult your dealer or local power company.

(9)This product is equipped with a 3-wire grounding type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature, if you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not ignore the purpose of the grounding-type plug.

(10)Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

(11)If an extension cord is used with this product, make sure that the total of the ampere ratings on the product plugged into the extension cord does not exceed 15 ampere.

(12)Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

(13)Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to service personnel.

(14)Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the product.

c.If the product has been exposed to rain or water.

d.If the product does not operate normally, when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

e.If the product has been dropped or the cabinet has been damaged.

f.If the product exhibits a distinct change in performance, indicating a need for service.

2	www.polaroid.com

Important Service and Safety Information

Service work should be performed only by qualified service technicians familiar with all safety checks and these service guidelines:

ELECTRIC SHOCK HAZARD

Always disconnect AC power before servicing!

Never modify any circuit!

Never insert any objects into the holes in the TV case!

ELECTROSTATIC DISCHARGE (ESD)

Components inside an LCD or plasma TV are sensitive to static electricity. Before servicing the TV, follow these guidelines:

•Avoid static-causing surfaces such as carpeted floors, plastic, and packing foam.

•Remove replacement components from their antistatic bags only when you are ready to use them. Do not lay components on the outside of antistatic bags because only the inside of the bags provide electrostatic protection.

•Always hold components by their edges. Avoid touching the edge connectors. Never slide components over any surface.

•Wear a grounding wrist strap (available at most electronics stores) and attach it to a bare metal part of your workbench or other grounded connection.

•Touch a bare metal surface on your workbench or other grounded object before touching any components.

PRECAUTIONS FOR USING LEAD-FREE SOLDER

Components within this television use lead-free solder (Sn-Ag-Cu). Look at the markings on board and components within the television to determine the correct solder type and match to the table below:

5 LEAD-FREE (Pb-Free) CATEGORIES

The following categories are meant to describe the Pb-free 2nd level interconnect terminal finish, component material, and/or the solder paste/solder used in board assembly:

e1 - SnAgCu (shall not be included in category e2) e2 - Sn alloys with no Bi or Zn excluding SnAgCu e3 - Sn

e4 - Precious metal (e.g., Ag, Au, NiPd, NiPdAu) (no Sn) e5 - SnZn, SnZnx (no Bi)

e6 - contains Bi

e7 - low temperature solder (≤ 150 °C) containing Indium (no Bi) e0, e8, e9 symbols are unassigned at this time.

When repairing components soldered with lead-free solder, ONLY use lead-free solder that matches the symbol on the component. Using conventional lead solder may lead to damage or a short, which could result in fire, electric shock, or other hazards.

Because the melting point of lead-free solder is higher than conventional lead solder, observe the following guidelines when soldering with lead-free solder:

3	www.polaroid.com

(1)Always use a dedicated soldering bit for different types of solder. If a different type of solder comes in contact with a lead-free solder bit, subsequent solder joints will no longer be lead free. Always clean the soldering bit after every use.

(2)Keep the soldering bit in contact with the just long enough to confirm a good solder joint. Leaving the bit in contact with parts for an extended period may damage the components.

(3)Because lead-free solder contains a higher concentration of tin, the tip of the soldering bit may be easily corroded or damaged. Do not leave the bit powered on for extended periods. When the tip of the soldering bit is blackened during use, clean the bit with steel wool or fine sandpaper.

NOTICE ABOUT REPLACEMENT PARTS

Many electrical and mechanical parts within LCD or plasma televisions are chosen for their specific safety characteristics within the overall system. Replacing individual parts with components rated for higher voltage or wattage can be dangerous!

Replacement parts must always be identical to those originally used in the television. Unauthorized substitute parts may result in fire, electric shock, or other hazards.

4	www.polaroid.com

Table of Contents

1.	Operation .......................................................................................................................................	6
2.	Troubleshooting / Flow Charts .......................................................................................................	14
3.	Polaroid Display Cell Defect Specification ........................................................................................	18
4.	Before Returning This Product to the User ......................................................................................	19
5.	Disassembly Procedure..................................................................................................................	20
	Rear Cover Removal ................................................................................................................	21
	Rear Cabinet Cover LCD Panel and Front Bezel ..........................................................................	23
	A/V Board Removal and Replacement .......................................................................................	29
	IR Board Removal and Replacement .........................................................................................	30
	Front/Side Control Buttons Removal and Replacement ...............................................................	31
6.	Spare Parts Lists – FLM-Series 26, 32, 37 .......................................................................................	32
7.	Exploded View Diagram .................................................................................................................	39
8.	Block Diagram – FLM-Series 26, 32, 37...........................................................................................	42
9.	Schematics ...................................................................................................................................	43
10.	PCB Layout Diagrams ....................................................................................................................	51

Model Specifications are located in User Manual. Go to polaroid.com to obtain User Manual.

5	www.polaroid.com

1. Operation

6	www.polaroid.com

7	www.polaroid.com

Original Remote Control

8	www.polaroid.com

9	www.polaroid.com

New Remote Control

10	www.polaroid.com

Factory Mode Procedure

1.Power on TV.

2.Press volume up and channel up buttons on the TV simultaneously and release.

3.Power off TV with remote or power button to exit.

11	www.polaroid.com

The operation of each OSD control is described in the following table:

Menu	Options	Sub-Options	Function and Description
VIDEO	Picture Mode	Vivid →Hi-Bright	Press repeatedly for different picture
		→Cinema	modes: Vivid →Hi-Bright →Cinema→Sport
		→Sport→User.	→User.
	Contrast	0…100 (75)	Fine tune the contrast.
	Brightness	0…100 (50)	Fine tune the brightness.
	Saturation	0…100 (50)	Fine tune the contrast.
	Hue	-30…+30 (0)	Fine tune the contrast.
	Sharpness	0…7 (4)	Fine tune the contrast.
	Color Temperature	Cool	Set the color temperature type.
		Nature
		Warm
		User	Red/Green/Blue: -19…+19
AUDIO	Bass	0…100 (50)	Fine tune the bass value.
	Treble	0…100 (50)	Fine tune the treble value.
	Balance	-20…+20 (0)	Fine tune the balance value.
	Effect	Live	Select the preset effect mode to match
		Dance	your music type and achieve stunning
		Techno	effects.
		Classic
		Soft
		Rock
		POP
		Off	Close this function.
	MTS	Mono	Set the sound type, which is only
		Stereo	available when input source is TV.
		Sap
TV	Auto Search	Auto search	Auto-search channels and put the
		channels.	programs into memory.
	Tuner Mode	Cable-STD / Cable-	Select the tuner mode.
		HRC / Cable-IRC
		Air
	Channel Skip	Set the channel that	If a channel is set to SKIP, when
		you want to skip.	scanning up/down channels the
			selected channel will be skipped.
	Channel Name	Edit the channel	It will be invalid if the current input
		name.	source is not TV.
SETUP	Language	English/	Set language.
		Spanish/French
	Timer	Time	Input current time
		Start Time	Input the TV start playing time.
		Stop Time	Input the TV stop playing time.
		Channel	Input the channel No. for desired TV
			program.
		Activate	On/Off/Once
		Display	On/Off
			Set the timer alarm on/off.
	Auto Sleep	30,60,90,120 Min	Preset the auto sleep time. The TV will
			automatically go into standby state
			when the preset time is up.
		Off	Set auto sleep function off.

12	www.polaroid.com

	Closed Caption	C1,C2,C3,C4,T1,T2,	Set the closed caption mode.
		TT4,and Off
	V-chip	Input Password	Input the 4-digit password. “0000”
		Block MPAA Rating	Set the input source that you want to
			lock.
		Block TV Rating	Input the old password first, and then
			input the new password.
		Block MPAA Unrated	Block all unrated movies.
		Block TV None Rating	Block all unrated TV programs.
	Reset	Reset to default	Reset the items in the setup menu
		value.	except the protected items.
HDTV	Audio Language		To set the audio language to English,
			French, or Spanish.
	Time Zone		Set the Time Zone value to Eastern
			Time, Indiana, Central Time, Mountain
			Time, Arizona, Pacific Time, Alaska
			and Hawaii.
	Auto Scan		Auto-search channels and put the
			programs into memory.
	Manual Scan		Add-on mode: To search channels that
			had not searched last time.
			Range mode: To search receivable
			channels in the setting range.
	Channel Skip		If a channel is set to SKIP, when
			scanning up/down channels the
			selected channel will be skipped.
	Analog Closed		Set the analog closed caption value to
	Caption		OFF,CC1,CC2,CC3,CC4,TEXT1,TEXT2,
			TEXT3 and TEXT4.
	Digital Closed		Set the digital closed caption value to
	Caption		OFF, Service1, Service2, Service3,
			Service4, Service5 and Service6.
	Digital Caption		To set the values of caption style.
	Style
	Block Channel		To setup the block channel.

13	www.polaroid.com

2. Troubleshooting / Flow Charts

Note: Reseat all cables, check fuse by AC plug, perform a clear or reset in factory mode and retest before ordering parts.

Can’t power on your TV?

This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by prying the cover off, following the illustration below. If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time Lag Fuse (Slow Blow) to replace the fuse.

Having trouble with setting your Parental Controls (V-Chip)?

The factory preset password is 0000. This password must be used first before setting your own personal password. It is recommended that you keep your personal password in a safe place and away from children. In the event you loose your personal password the master password is 8202. The master password overrides all passwords. The master password can’t be changed and should be kept in a safe place away from children.

Having trouble with setting Picture-in-Picture settings?

The Picture-in-Picture will not work using Component 1 and Component 2 as the input sources.

14	www.polaroid.com

15	www.polaroid.com

16	www.polaroid.com