Page 1
DMC Ie
Installation Quickstart
DMC_COV1.FMK i Tuesday, May 4, 1999 10:14 AM
Page 2
English_______________________________3
Page 3
English
3
1
DMC Ie camera
2
Power supply and cord (may differ from illustration for some
locations)
3
SCSI host adapter installation kit for PCs (optional; contact
your dealer)
4
SCSI cable adapter (HD50 to DB25)
5
SCSI cable (2-meter)
6
Polaroid DMC Software CD containing
• TWAIN driver and Polaroid DMC Ie software for
Windows 95, 98 and NT
• Adobe Photoshop plug-in and Polaroid DMC Ie software
for Power MAC and PowerPC systems
• Online user’s guide
7
Optional image-reporting software (available in some regions)
Warning:
Nothing inside the camera or power supply is user
serviceable. Do not disassemble the camera. Doing so could result
in severe electrical shock and damage to the camera. This action
may also void your warranty. Contact Polaroid Technical Support
or your dealer if the camera is malfunctioning. (To contact
Polaroid from within the U.S.A., call
1-800-432-5355
. Outside the
U.S.A., see
Obtaining Technical Assistance
in the online user’s guide
or visit
www.polaroid.com
on the World Wide Web.)
74
Page 4
English
4
Page 5
English
5
Connecting the camera to the microscope:
1
Screw the c-mount adapter into the camera.
Note:
Finger-tighten the adapter. Do not use tools.
2
Insert the c-mount adapter into the microscope. The camera
indicator LEDs should face toward the front of the microscope.
0.25 in.
(6.3mm)
maximum
Indicator
LEDs
Page 6
English
6
Turn the camera power switch to off (0) and set the SCSI address
switch to a value not used by any other device.
Note:
The address is preset to 4. Do not change it unless another
device is using 4. Other addresses typically available are 2, 5 and 6.
Look at the SCSI
address switch on each
SCSI device connected
to your system. If necessary, see the instructions provided with the
devices.
Power switch?
(off=0)
SCSI address switch
Do not use 7, 8 or 9?
(not valid addresses)
Page 7
English
7
Do not connect
Set termination:
The last device in a SCSI chain must be terminated (or have
termination on), while all other devices must be unterminated (or
have termination off).
If the camera is the only device connected to your SCSI host
adapter or the last device in a SCSI chain, set the camera
termination to on (1). Otherwise, set termination to off (0).
Termination instructions for your other SCSI devices are provided
with the devices.
Note:
Do not use an external, passive terminator to terminate the
camera. If another device is at the end of the SCSI chain, that
device must be terminated with an active terminator for proper
camera operation.
DMC Ie camera
termination on (1)
Termination
switch
Page 8
English
8
1
2
Power switch (on=1)
To AC power
Green LED
Yellow LED
Page 9
English
9
Select Programs from the
Start menu.
Point to Polaroid Digital
Microscope Camera and
select Polaroid DMC Ie.
Page 10
English
10
Select DMC Help from the
Help menu.
Select Programs from the
Start menu.
Point to Polaroid Digital
Microscope Camera and
select User's Guide.
Page 11
English
11
Page 12
PU-20854M-1 5/99
DMC_COV4.FMK iv Wednesday, May 5, 1999 10:41 AM
Loading...