Page 1

P R O D U C T
2015
C A T A L O G
NEW!
W W W . P O I N T - S O U R C E A U D I O . C O M
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 1
Page 2

Introduction to Point Source Audio
OUR COMPANY • •
Point Source Audio is a solution based design, engineering, and manufacturing company in the audio industry. With over
60 years of combined professional audio industry experience, the PSA product designers approach every product detail
with a depth of understanding that results in ease, convenience, and efficiency in design. Since 2002 Point Source Audio
has developed, engineered and manufactured transducer products for companies under a variety of brands. While
continuing to do this we are also focused on developing products under the Point Source Audio brand affording our
customers a streamlined path for
purchasing high value products.
We sell our products exclusively through
a network of high caliber resellers,
contractors and distributors throughout
the world. It is our goal to provide
performance based products at great
prices with the very best customer
service and support. In 2010, Point
Source Audio was appointed the Master
Distributor for Digigram for all the
Americas. Among the many products
available through Point Source Audio are
the world renowned brand of Digigram
sound cards, IP audio and video codecs,
and Ethersound audio transport
technology.
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 2
Page 3

Contents
Best Microphone Award Winner ........................................ page 4
SERIES8 Product Reviews ............................................... page 5
Microphone Comparison Chart ......................................... page 6
NEW! Premium Microphone Case .................................... page 7
Performance Vocal Microphones ....................................... page 8
Optimized Speech Microphones ........................................ page 10
Basic Voice Microphones .................................................. page 12
NEW! CM-i3 Intercom Headset ....................................... page 13
Microphone Accessories .................................................. page 15
The Original “Unbreakable Boom”
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 3
Page 4

Best Microphone Award Winner
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 4
Page 5

Reviews by the Audio Experts
"Keep these on your 'A' list"
"Over the past few years, Point Source Audio has gained a reputation for
supplying tough, good-sounding miniature microphones in headset, earworn
and lavalier styles. Now, with its new flagship SERIES8 line, the company is
poised to take things up a notch—or two. As mentioned earlier, the SERIES8
mics are designed for vocal performance. Models optimized for spoken word
application are also offered, but the SERIES8 capsules are intended for wide,
response/wide dynamic range use such as singing, which can present an
exceptionally demanding source to any microphone, let alone a miniature
transducer."
"I didn't really need any EQ at all for the mic
to sound fantastic."
"There's been a lot of progress on the miniature microphone front,
highlighted by a steady stream of new models from companies like Point
Source Audio. I recently checked out three models in the company's
SERIES8, including the CR-8L cardioid lavalier, the CO-8WS omnidirectional
earworn, and the CO-8WD omnidirectional dual-ear headset. All are capable
of handling the higher sound pressure levels of singing performers, with the
omni models designed to be moisture and makeup proof (they carry an IP57
waterproof rating). "
"And that “unbreakable boom” isn’t far from
the truth."
"The earworn models adjust for secure mounting and the flexible boom
can be easily adjusted to suit. The boom length (between base of ear and
capsule) is about 3.25 inches, which was fine for most people, but a bit
short for performers with larger heads. The headset models offer a much
wider range of adjustment and are quite secure, even with the most active
performers. The headset earpieces swivel flat for storage and are released
by a slight 1/4-inch tug to lock them in place. And that “unbreakable boom”
isn’t far from the truth. I couldn’t believe how much torture these could take
without a hitch."
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 5
Page 6

Microphone Comparison Chart
Performance Vocals
Optimized Speech
PREMIUM FEATURES
Max SPL
Super Flex Boom
Waterproof
X-Connectors
STYLE OPTIONS
Headset
Earset KIT
Earworn
Lavalier
Wearing Placement
Omni Cardioid
Omni Omni
CO-8W CR-8 CO-6 CO-5W CO-3
148dB SPL 135dB SPL
125dB SPL 125dB SPL
● ● ●
● ●
● ●
● ●
● ● ● ● ●
● ● ● ● ●
● ●
Basic Voice
Omni
116dB SPL
Color Options: Beige, Brown, Black
SPECIFICATIONS
Back Electret
Element
Pattern
Frequency
Sensitivity for Earworn & Headsets
High Sensitivity for Lavaliers
Low Sensitivity for Lavaliers
Output Impedance
Operating Voltage
Cable Length
Net Weight
Maximum SPL
Condenser
Omnidirectional Cardioid
20Hz ~ 20kHz 160Hz ~ 14kHz
-43dB 1V/Pa
(Nominal Sensitivity
± 3dB at 1kHz)
-34dB 1V/Pa (CO-8WL)
-43dB 1V/Pa (CO-8WLo)
(Nominal Sensitivity ±
3dB at 1kHz)
1400Ω ± 30%
(at 1000 Hz)
1 ~ 10V 1 ~ 10V
4 ft .077 in.
+ connector
0.6 oz 0.6 oz
148dB SPL 135dB SPL
Back Electret
Condenser
-50dB 1V/Pa
(Nominal Sensitivity
± 3dB at 1kHz)
5000Ω ± 30%
(at 1000 Hz)
4 ft .077 in.
+ connector
Back Electret
Condenser
Omnidirectional Omnidirectional
40Hz ~ 17kHz 40Hz ~ 17kHz
-47dB 1V/Pa
(Nominal Sensitivity
± 3dB at 1kHz)
2,000Ω ± 30%
(at 1kHz)
1.5 ~ 10VDC 1.5 ~ 10VDC
4 ft 2 in.
+ connector
0.6 oz 0.6 oz
125dB SPL 125dB SPL
Back Electret
Condenser
-47dB 1V/Pa
(Nominal Sensitivity
± 3dB at 1kHz)
2,000Ω ± 30%
(at 1kHz)
4 ft 2 in.
+ connector
Back Electret
Condenser
Omnidirectional
50Hz ~ 16kHz
-44dB 1V/Pa
(Nominal Sensitivity
± 3dB at 1kHz)
1,500Ω ± 30%
(at 1kHz)
1.5 ~ 10VDC
3 ft 11 in.
+ connector
0.28 oz
116dB SPL
Standard Accessories
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
Windscreen, body clip,
storage box
Windscreen, body
clip, storage box
Windscreen, body
clip, storage box
Windscreen, body
clip, storage box
©2015 Point Source Audio
Body clip,
storage box
P a g e 6
Page 7

Microphone Storage Case CO-PCH
NEW!
DESCRIPTION • •
Point Source Audio microphones are all shipped in their own custom box with
magnetic lid, but when you need a little more for travel or to store multiple
microphones in an efficient space, try this handy case. PSA headset microphones
fold flat, so even they can be easily tucked in this case along with your earworn
and lavalier mics.
Two interior pockets safely store up to four microphones. Compatible with all
Point Source Audio microphones. Color available in "Obviously Orange" to help
you quickly locate your microphones. Dimensions: 5.75" round x 1.5" tall.
MODEL NO: CO-PCH
This custom designed case is tailor-fit for
your Point Source Audio microphones. Its
efficient interior pockets can store up to
four of your headset, earworn, and lavalier
mics. An attractive accessory that will keep
mics organized and save space!
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 7
Page 8

60
120
6dB/DivCR-8
300
240
270
1 kHz Polar Response
0
180
210
330
150
30
90
Relative Response in dB
Frequency In Hertz
measured at 6 inches
100
-20
-10
20
+10
0
50
CR-8
500 5k1k 10k 20k
+20
SERIES8 for Performance Vocals CR-8
DESCRIPTION • •
The SERIES8 cardioid collection is offered in 3 popular styles: headset, earworn, and
lavalier. The cardioid pick up pattern is ideal in applications when there is more than one
mic being used, in live performances, and in some recording situations. A unique benefit
of the SERIES8 cardioid headset and earworn microphones is that the capsule is
especially miniaturized and there is no need to force the mic directly in front of the mouth
as with other cardioid microphones. The boom of the microphone can sit comfortably at
the corner of the mouth so an unobtrusive appearance is easily achieved. Both the
headset and earworn mics feature a boom bendable beyond 360°. Each microphone
includes one Interchangeable X-Connector for termination to your wireless system.
ITEM NUMBER: CR-8D-XXX-XX
ITEM NUMBER: CR-8S-XXX-XX
ITEM NUMBER: CR-8L-XXX -XX
D IR E C T I O N A L P A T T E R N • •
CR - Cardioid
X-CONNECTOR OPTIONS (XXX)• •
CR-8D Headset
CR-8S Earworn
-XAK AKG -XLEw Lectrosonics-waterproof -XSH Shure, Line 6
-XAT Audio-Technica -XMP MiPro -XSK Sennheiser SK, Zaxcom
-XBY Beyerdynamic -XSD Sony DWT-B01 -XTX Telex
-XLE Lectrosonics -XSE Sennheiser
COLORS (XX)• •
-BE Beige -BR Brown -BL Black
FREQUENCY RESPONSE • • SPECIFICATIONS • •
Element: Back Electret Condenser
Pattern: Unidirectional, cardioid
Frequency: 160Hz ~ 14kHz
Sensitivity: -50dB 1V/Pa (Nominal
Maximum SPL: 135dB SPL
Output Impedance: 5000 Ω ± 30% (at 1kHz)
POLAR RESPONSE • •
Operating Voltage: 1 ~ 10 V
Cable Length: 4ft .077in. + connector
Net Weight: 0.6 oz
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
Colors: Beige, Brown, or Black
Connector Types: TA3F, TA4F, lockable
Boom Flexibility: Bendable to 360°
Ear Placement: Left/Right
Included Accessories: Windscreen, cable clip,
Boom
Bends 360˚
©2015 Point Source Audio
135dB
max SPL
Sensitivity ± 3dB at 1kHz)
3.5mm, Hirose, Lemo-style
storage box
CR-8L Lavalier
Interchangeable
X-Connector
P a g e 8
Page 9

6dB/Div
120
240
270
180
210
150
90
60
300
0
1 kHz Polar Response
330
30
CO-8
Relative Response in dB
-10
-20
0
+10
+20
20 50
Frequency In Hertz
100
CO-8
500 1k 5k 10k 20k
SERIES8 for Performance Vocals CO-8W
DESCRIPTION • •
The SERIES8 omnidirectional collection is offered in 3 popular styles: headset,
earworn, and lavalier. The omnidirectional pattern assures ease in fitting with a
natural vocal sound well suited in low to moderate noise environments. Its circular
pick up pattern adapts exceptionally to a wide array of mic’ing applications. All the
SERIES8 omni microphones boast of 148dB max SPL, IP57 waterproof rating against
water, sweat and makeup; and our super bendable boom is “unbreakable” up to 360°
bending over the lifetime of the product. Each microphone comes with one
X-Connector of your choosing for termination to your wireless system. The
X-Connectors have a threaded screw connection so they are simple to remove, but
remain secure while in use.
ITEM NUMBER: CO-8WD-XXX-XX
ITEM NUMBER: CO-8WS-XXX-XX
ITEM NUMBER: CO-8WL-XXX-XX
ITEM NUMBER: CO-8WLo-XXX-XX
D IR E C T I O N A L P A T T E R N • •
CO - Omnidirectional
X-CONNECTOR OPTIONS (XXX)• •
-XAK AKG -XLEw Lectrosonics-waterproof -XSH Shure, Line 6
-XAT Audio-Technica -XMP MiPro -XSK Sennheiser SK, Zaxcom
-XBY Beyerdynamic -XSD Sony DWT-B01 -XTX Telex
-XLE Lectrosonics -XSE Sennheiser
COLORS (XX)• •
-BE Beige -BR Brown -BL Black
Boom
Bends 360˚
148dB
max SPL
Water, sweat,
makeup proof
CO-8WD Headset
CO-8WS Earworn
CO-8WL Lavalier
Interchangeable
X-Connector
FREQUENCY RESPONSE • •
POLAR RESPONSE • •
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
SPECIFICATIONS • •
Element: Back Electret Condenser
Pattern: Omnidirectional
Frequency: 20Hz ~ 20kHz
Sensitivity: -43dB 1V/Pa
-34dB 1V/Pa (CO-8WL)
(Nominal Sensitivity ± 3dB
at 1kHz)
Maximum SPL: 148dB SPL
Output Impedance: 1400Ω ± 30% (at 1kHz)
Operating Voltage: 1 ~ 10 V
Cable Length: 4ft. 077in. + connector
Net Weight: 0.6 oz
Colors: Beige, Brown, or Black
Connector Types: TA3F, TA4F, lockable
3.5mm, Hirose, Lemo-style
Boom Flexibility: Bendable to 360°
Ear Placement: Left/Right
Included Accessories: Windscreen, cable clip,
storage box
©2015 Point Source Audio
P a g e 9
Page 10

Relative Response in dB
+10
-20
-10
0
+20
20 50
Frequency In Hertz
100
CO-5
500 1k 5k 10k 20k
1 kHz Polar Response
0
30
60
120
150
90
240
210
180
270
300
330
6dB/DivCO-5
Optimized Speech Microphones CO-6
DESCRIPTION • •
The CO-6 earset mic features speech optimized characteristics at a maximum
125dB SPL, but includes all the premium attributes that come with the
celebrated “unbreakable boom”. The CO-6 Earworn Microphone is designed for
vocal reinforcement for church liturgy, singing, aerobics instruction, lecturing,
sports-casting and other applications that require high quality vocal pick up in
a hands-free environment. The boom life is prolonged with the enhanced
durability of the completely bendable boom. The convenient placement near
the mouth greatly reduces noise from wind and clothing. Additionally, its
distinguishing clarity in close-talk operation and excellent gain before feedback
make it suitable for applications where higher degrees of speech intelligibility
are desired.
ITEM NUMBER: CO-6-KIT-XX-XX
ITEM NUMBER: CO-6-XX-XX
CO-6-KIT Earset
D IR E C T I O N A L P A T T E R N • •
CO- Omni
W IRE L E S S C H O I C E S ( X X ) • •
-AK AKG -SE Sennheiser
-AT Audio-Technica -TX Telex
-MP MiPro -SH Shure or Line 6
COLORS (XX) • •
-BE Beige -BL Black
FREQUENCY RESPONSE • •
CO-6
POLAR RESPONSE • •
CO-6
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
CO-6 Earworn
Boom
Bends 360˚
SPECIFICATIONS • •
Element: Back Electret Condenser
Pattern: Omni-directional
Frequency: 40Hz ~ 17kHz
Sensitivity: -47dB 1V/Pa (Nominal
Sensitivity ± 3dB at 1kHz)
Maximum SPL: 125dB
Output Impedance: 2,000Ω ± 30% (at 1kHz)
Operating Voltage: 1.5V ~ 10VDC
Cable Length: 4ft. 2in. + connector
Net Weight: 0.6 oz
Colors: Beige or Black
Connector Types: TA3F, TA4F, lockable
3.5mm, Hirose
Boom Flexibility: Bendable to 360°
Ear Placement: Left/Right
Included Accessories: Windscreen, cable clip,
storage box
©2015 Point Source Audio
P a g e 10
Page 11

Relative Response in dB
+10
-20
-10
0
+20
20 50
Frequency In Hertz
100
CO-5
500 1k 5k 10k 20k
1 kHz Polar Response
0
30
60
120
150
90
240
210
180
270
300
330
6dB/DivCO-5
Optimized Speech Microphones CO-5W
DESCRIPTION • •
The CO-5W waterproof microphone is a durable earworn microphone with flexible
boom designed for vocal reinforcement. Moisture, sweat and stage makeup have met
their match with the water protected element of this microphone. This waterproof /
sweatproof microphone defends against all types of challenging stage and weather
conditions. Sweating from humidity? Splashed by seals? Drenched from rain? The CO-
5W waterproof microphone will not let you down. The CO-5W has an impressive
Ingress Protection (IP) Rating of 57, whereas the first digit (5 out of 6) references
particle protection, and the second digit (7 out of 8) references liquid protection. The
CO-5W waterproof microphone has an omni-directional polar pattern that allows a full
360 degree pick up of sound providing a natural blend of voice and ambience.
ITEM NUMBER: CO-5W-KIT-XX-XX
ITEM NUMBER: CO-5W-XX-XX
D IR E C T I O N A L P A T T E R N • •
CO- Omni
W IRE L E S S C H O I C E S ( X X ) • •
-AK AKG -SE Sennheiser
-AT Audio-Technica -TX Telex
-MP MiPro -SH Shure or Line 6
CO L O R S ( X X ) • •
-BE Beige
CO-5W-KIT Earset
CO-5W Earworn
Water, sweat,
makeup proof
FREQUENCY RESPONSE • •
POLAR RESPONSE • •
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
SPECIFICATIONS • •
Element: Back Electret Condenser
Pattern: Omnidirectional
Frequency: 40Hz ~ 17kHz
Sensitivity: -47dB 1V/Pa (Nominal
Maximum SPL: 125dB
Output Impedance: 2,000Ω ± 30% (at 1kHz)
Operating Voltage: 1.5V ~ 10VDC
Cable Length: 4ft. 2in. + connector
Net Weight: 0.6 oz
Colors: Beige
Connector Types: TA3F, TA4F, lockable 3.5mm,
Boom Flexibility: Bendable to 20°
Ear Placement: Left/Right
Included Accessories: Windscreen, cable clip,
Sensitivity ± 3dB at 1kHz)
Hirose
storage box
©2015 Point Source Audio
P a g e 11
Page 12

90
300
270
240
120
180
210
6dB/Div
150
1 kHz Polar Response
330
0
30
60
CO-3
CO-3
Relative Response in dB
20 50 100 500 1k 10k 20k5k
-20
-10
+10
0
+20
Frequency In Hertz
Basic Voice Microphones CO-3
DESCRIPTION • •
The CO-3 Microphone is our entry-level earworn microphone designed for speech
reinforcement for church liturgy, lecturing, and other applications that require
good quality vocal pick up in a hands-free environment. It has an omnidirectional
polar pattern which allows a full 360 degree pick up of sound providing a natural
blend of voice and ambience. The design of the CO-3 earworn microphone lends
itself to reduced speech produced "popping sounds" and voice overloads in close
mic applications and the convenient placement near the mouth greatly reduces
noise from wind and clothing. Its distinguishing clarity in close talk operation and
excellent gain before feedback make it suitable for applications where higher
degrees of speech intelligibility are desired.
ITEM NUMBER: CO-3-KIT-XX-XX
ITEM NUMBER: CO-3-XX-XX
CO-3-KIT Earset
D IR E C T I O N A L P A T T E R N • •
CO- Omni
W IRE L E S S C H O I C E S ( X X ) • •
-AK AKG -SE Sennheiser
-AT Audio-Technica -TX Telex
-MP MiPro -SH Shure or Line 6
CO L O R S ( X X ) • •
-BE Beige -BL Black
FREQUENCY RESPONSE • •
POLAR RESPONSE • •
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
CO-3 Earworn
SPECIFICATIONS • •
Element: Back Electret Condenser
Pattern: Omnidirectional
Frequency: 50Hz ~ 16kHz
Sensitivity: -44dB 1V/Pa (Nominal
Sensitivity ± 3dB at 1kHz)
Maximum SPL: 116dB
Output Impedance: 1500Ω (at 1kHz)
Operating Voltage: 1.5V ~ 10VDC
Cable Length: 3ft. 11in. + connector
Net Weight: 0.28 oz
Colors: Beige or Black
Connector Types: TA3F, TA4F, lockable
3.5mm, Hirose
Boom Flexibility: Fixed/Not bendable
Ear Placement: Left
Included Accessories: Cable clip, storage box
©2015 Point Source Audio
P a g e 12
Page 13

Intercom Headset—NEW! CM-i3
PATENT PENDING
Model No: CM-i3-XX
Dual In-Ear Intercom Headset with Dynamic Noise-Cancelling Boom Microphone
The CM-i3 Intercom Headset’s one-of-kind design utilizes in-earphones for lightweight comfort and to provide excellent noise isolation in
moderate to high noise environments. This patent-pending slim-line design allows for incredible ease in switching between three listening
modes: left, right, or left and right to create the desired audio mix. The in-earphones are modular for convenient service replacement or to
personalize with your own earphones. At a weight of only 2 ounces, it is a mere fraction of other binaural headsets.
Includes EM-3 earphones and microphone assembly, 3 size eartips, windscreen w/ o-ring, and custom storage case.
Modular design with replaceable in-earphones ● Kink-free cable design
Improves noise isolation ● Weighs only 2 oz.
Eliminates fatigue ● Even works with iPhones and iPads
CM-i3 Accessories
CM-iX-XX
Headset microphone assembly only.
Includes cable wrap with earphone
installation tool, and windscreen with oring. Earphones not included.
CM-CSE
Intercom headset
storage case
CM-WSN
Windscreen with o-ring for CM-i3
6-ETP-X
3 sets eartips for EM-3 earphones.
Specify one size: small, medium,
or large
EM-3
EM-3 Earphones terminated with 3.5
mm mini connector
CM-EXT
Expandable coiled cable with 4-pin
male XLR - 4 pin female XLR.
2 ft. retracted / 10 ft. extended
CM-CAB-KIT
Cable wrap with earphone
installation tool
CM-BCP
Belt clip accessory for XLR connector
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 13
Page 14

Intercom Headset CM-i3
DESCRIPTION • •
The CM-i3 is the world's first modular intercom headset. This intercom
headset has a patent-pending slim-line design that allows for three
listening modes. Rather than having to remove the entire headset to check
environmental sounds or interact with others, simply remove one or both
earphones to exit the listening mode or monitor a mix of feed audio and
surrounding acoustics. For the ultimate in modularity, the CM-i3 intercom
headset is designed using Point Source Audio’s pro performance EM-3 in-
earphones, but users will have the capability of switching out the supplied
earphones with in-earphones of their own choice—if desired. The swappable
in-earphones offer the ability to create a custom product to meet personal
preferences for audio quality and greatly improves the product's
serviceability and life. The CM-i3 intercom headset is designed for concert
venues, front of house operations, multimedia production, and other
professional trades relying on convenient two-way communications.
F E AT UR E S :
•• In-ear design eliminates fatigue
•• 12dB off-axis noise rejection
•• Weighs only 2 oz.
•• Replaceable earphones
•• Kink-free cable design
•• Even works with iPhones and iPads
•• PATENT PENDING
NEW!
CM-i3 Intercom Headset
The CM-i3 Intercom Headset offers a
revolutionary combination of noise-isolation,
lightweight comfort and earphone modularity.
M O D E L N O :
CM-i3-4F – equipped with 4-pin female XLR for all Clear-Com compatible systems
CM-i3-4M – equipped with 4-pin male XLR for RTS mono systems
CM-i3-5F – equipped with 5-pin female XLR for Telex systems
CM-i3-5Mm – equipped with 5-pin male XLR for mono Telex TR700/800 & TR80N systems
CM-i3-5Ms – equipped with 5-pin male XLR for all stereo RTS systems
CM-i3-PH – equipped with 3.5 mm plug for Riedel iPhone and iPad intercom apps
EARPHONE SPECIFICATIONS • •
Speaker type: Single driver ported
Sensitivity: 120dB SPL@1VRMS
(at 1 kHz)
Impedance: 32Ω
Color: Silver housing with gold
band, black cable
Cable length (total): 1.2 Meters
L/R cable: 50cm
Input connector: 3.5mm
Transducer housing: Metal
Accessories: 3 sizes of eartips
MICROPHONE SPECIFICATIONS • •
Element: Moving coil dynamic
Directional
characteristics:
Sensitivity: -60dB 1V/Pa
Frequency: 300Hz ~ 10kHz
Impedance: 200Ω
Cardioid
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 14
Page 15

Microphone Accessories
MODEL NO. TITLE DESCRIPTION
NEW!
CO-PCH
R-DMC-XX
R-DMH-XX
Premium storage case for miniature microphones.
Conveniently stores up to 4 microphones.
Color: Orange
Reversible (left or right) dual ear mic clip for earworn
microphones.
Colors: BE—Beige BL—Black
Replacement dual headset frame for SERIES8 Headset
microphones. Standard size.
Colors: BE—Beige BL—Black
R-DMHs-XX
6-WSN-XX
6-WSNX-XX
S-CLIP-XX
B-Clip
NEW!
NEW!
Replacement dual headset frame for SERIES8 Headset
microphones. Small Size.
Colors: BE—Beige BL—Black
6-Pack windscreens for microphones.
Colors: BE—Beige BL—Black
6-Pack windscreens optimized for SERIES8 Cardioid
microphones. Colors: BE—Beige BL—Black
Control clips for SERIES8 headset microphones.
Set of 4. Colors: BE—Beige or BL—Black
Body clip for microphones.
X-CON-EXT
NEW!
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
SERIES8 microphone extension cable.
2 ft. extended.
©2015 Point Source Audio
P a g e 15
Page 16

Wireless Terminations
X-Connector s f o r S E RIES8 Microphones (Re placeable)
X A K
Interchangeable 3-pin mini
X-Connector for AKG
X B Y
Interchangeable 4-pin mini
X-Connector for Beyerdynamic
X LE w
X A T
Interchangeable locking 4-pin Hirose
X-Connector for Audio-Technica
X LE
Interchangeable 5-pin mini
X-Connector for Lectrosonics
X M P
Interchangeable 2.5mm waterproof mini
X-Connector for Lectrosonics
Interchangeable locking 4-pin mini
XLR X-Connector for MiPro
X S E
Interchangeable 3.5mm locking
X-Connector for Sennheiser EW Series
X S K
X S H
Interchangeable 4-pin mini
X-Connector for Shure,
Line 6, JTS, Trantec and Carvin
X T X
Interchangeable lemo-style 3-pin
X-Connector for Sennheiser SK, Shure
UR1M, Zaxcom and WisyCom
Interchangeable 4-pin mini
X-Connector for Telex
X S D
Interchangeable Hirose 4-pin twist lock
X-Connector for Sony DWT-B01
Loose Connector s (for Hardwir ed Terminations)
CO N - AK
3-pin mini connector
CO N - LE
5-pin mini connector
CO N - SE
3.5mm locking connector
CO N - SK
Lemo-style 3-pin connector
CO N - AT
Locking Hirose 4-pin connector
CO N - MP
4-pin mini locking connector
CO N - SH
4-pin mini connector
CO N - X L R
Phantom powered preamp for Shure
terminated PSA mics
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 16
Page 17

Pricing and information contained in this Price Guide is subject to change without notice.
Please contact Point Source Audio Sales with questions or comments.
sales@point-sourceaudio.com
CORPORATE HEADQUARTERS
POINT SOURCE AUDIO
1129 Industrial Ave. #205
Petaluma, CA 94952
t: <415> 226-1122
f: <415> 520-2110
s a l e s @ p o i n t - s o u r c e a u d i o . c o m
©2015 Point Source Audio
P a g e 17