Customers are increasingly
choosing Point Source Audio for
its product innovation, performance,
and committed customer support.
Here is just a short list:
San Francisco Opera
Hamilton
The King and I National Tour
Belgian Movie Awards
National Theatre in Oslo
Shiki Theater Company, Tokyo
New York Philharmonic
Théâtre du Châtelet, Paris
Smith Center, Las Vegas
Carousel Musical
Hadestown Musical
Alley Theatre
Joshua Bell, Violinist
Berklee College of Music
The Lincoln Center
Dirty Dancing on Tour
Fiddler on the Roof
Interlochen Center for the Arts
Princeton University
Kravis Center, Florida
Philadelphia POPS Orchestra
Utah Shakespeare Festival
University of Arizona School
School of Theatre, Film & Television
The Twiolins, Germany
Our flagship SERIES8 omnidirectional microphones are now available in dual petite elements
for the ultimate in built-in backup. The new CO2 Confidence Collection includes three popular
styles: headset, earmount, and lavalier. The fully redundant microphones have factory matched
elements mated into an ultra low-profile tandem form factor. The mic cable splits approximately
nine inches above connection to the body-packs to allow ample room for separation of the
transmitters. Both elements are IP 57 waterproof rated against water, sweat and makeup; and
our super bendable boom on the headset is “Unbreakable” up to 360°. Each microphone accepts
two interchangeable X-Connectors for termination to your wireless systems.
Boom Bends 360˚ 136 dB Max SPL Water, Sweat, Makeup Proof Interchangeable
- XXX I N TERC H A N GEA B L E CO N N E CTOR O PTIO N S
-XAK AKG, Audix-XLEw Lectrosonics-waterproof-XSH Shure, Line 6
EMBRACE Microphones are custom-fit ear mounted microphone solutions for theatre, television
and other applications where the microphone must be completely camouflaged yet still maintain
consistent placement from the mouth even with head movement. EMBRACE lets you bend, shape
and trim for a precise custom-fitted microphone in seconds—without all the time, hassle, and
expense of outdated ear rigs. EMBRACE Microphones come complete with our acclaimed
SERIES8 lavalier microphone, a color matched left and right Earmount, and a assortment of cable
clips. For extreme camouflaging, the EMBRACE Earmounts also accept theatrical color
markers of almost any color.
136 dB Max SPL Water, Sweat, Makeup Proof Interchangeable X-Connector
- XXX C O NNEC T O R OP T I O NS
-XAK AKG, Audix-XLEw Lectrosonics-waterproof-XSH Shure, Line 6
The SERIES8 cardioid collection is offered in three popular styles: headset, earworn, and lavalier.
The cardioid pick up pattern is ideal in applications when there is more than one mic being used,
in live performances, and in some recording situations. A unique benefit of the SERIES8 cardioid
headset and earworn microphones is that the capsule is especially miniaturized and there is no
need to force the mic directly in front of the mouth as with other cardioid microphones. The boom
of the microphone can sit comfortably at the corner of the mouth so an unobtrusive appearance is
easily achieved. Both the headset and earworn mics feature a boom bendable beyond 360°. Each
microphone includes one interchangeable X-Connector for termination to your wireless system.
Included Accessories: Windscreen, cable clip, storage box
CR-8D Headset
ITEM: CR-8D-XXX-XX
CR-8S Earworn
ITEM: CR-8S-XXX-XX
SERIES8 PERFORMANCE VOCALS
CR-8 CARDIOID
CR-8L Lavalier
ITEM: CR-8L-XXX-XX
SERIES8 PERFORMANCE VOCALS
DESCR I P TION
The SERIES8 omnidirectional collection is offered in three popular styles: headset, earworn, and
lavalier. The omnidirectional pattern assures ease in fitting with a natural vocal sound well-suited
in low to moderate noise environments. Its circular pick up pattern adapts exceptionally to a wide
array of mic’ing applications. All the SERIES8 omni microphones offer IP 57 waterproof rating
against water, sweat and makeup; and our super bendable boom is “Unbreakable” up to 360°.
Each microphone comes with one X-Connector of your choosing for termination to your wireless
system. The X-Connectors have a threaded screw connection so they are simple to remove, but
remain secure while in use.
CO-8 OMNIDIRECTIONAL
CO-8WD Headset
ITEM: CO-8WD-XXX-XX
CO-8WS Earworn
ITEM: CO-8WS-XXX-XX
CO-8WL Lavalier
ITEM: CO-8WL-XXX-XX
ITEM: CO-8WLh-XXX-XX
Boom Bends 360˚ 136 dB Max SPL Water, Sweat, Makeup Proof
Interchangeable
X-Connector
- XXX I N TERC H A N GEA B L E CO N N E CTOR O PTIO N S
-XAK AKG, Audix-XLEw Lectrosonics-waterproof-XSH Shure, Line 6
CO2-8WL is 2 Mics in 1 Supporting 2 Separate Wireless Transmitters
The original CO2-8WL pairs two microphone elements into a single housing to create a sleek
form factor. The all-in-one solution is ideal for talent requiring microphone backup in live
broadcasting and production environments. The paired elements are factory matched in
frequency and sensitivity so that when vital backup is initiated any difference in audio
performance is nearly undetectable. The patent pending design mates the dual mics as well
as their independent and continuous wire paths into a singular housing and wire jacket for a
clean alternative to cumbersome cable dressing. The mic cable splits approximately nine
inches above connection to the body-packs to allow ample room for separation of the
transmitters. The mic elements are IP 57 waterproof rated to protect against water, sweat
and makeup. Hardwired terminations come standard in four options.
136dB Max SPL Water, Sweat, Makeup Proof
- XX T E RMINA T ION O P TIONS
-SK Sennheiser SK, Zaxcom-SE Sennheiser
-LE Lectrosonics-SH Shure, Line 6
Dual Element Lavalier
ITEM: CO2-8WL-XX-BL
-XX C O L OR O P T IONS
-BL Black
SPECI F I CATI O N S
Element: Waterproof Back Electret Condenser (2 Matched)
Pattern: Omnidirectional
Frequency: 20Hz ~ 20kHz
Sensitivity: -43 dB 1V/Pa (Nominal Sensitivity ± 3dB at 1kHz)
The CO-6 Earworn Microphone features speech optimized characteristics at a maximum 125 dB
SPL, but it includes all the premium attributes that come with the celebrated “Unbreakable
Boom”. The CO-6 is designed for vocal reinforcement for church liturgy, aerobics instruction,
singing, lecturing, sports-casting and other applications that require high quality vocal pick up
in a hands-free environment. The boom life is prolonged with the enhanced durability of the
completely bendable boom. The convenient placement near the mouth greatly reduces noise
from wind and clothing. Additionally, its distinguishing clarity in close-talk operation and
excellent gain before feedback make it suitable for applications where higher degrees of speech
intelligibility are desired.
- XX C O N NECTO R OPT I O N S
-AK AKG, Audix -SE Sennheiser -SH Shure, Line 6
-AT Audio-Technica -MP MiPro -TX Telex
Boom Bends 360˚125 dB Max SPL
-XX C O L OR O P T IONS
-BE Beige
-BL Black
SPECI F I CATI O N S
Element: Back Electret Condenser
Pattern: Omnidirectional
Frequency: 40Hz ~ 17kHz
Sensitivity: -47 dB 1V/Pa (Nominal Sensitivity ± 3dB at 1kHz)
Maximum SPL: 125 dB
Output Impedance: 2,000Ω ± 30% (at 1kHz)
Operating Voltage: 1.5V ~ 10VDC
Cable Length: 4ft. 2in. + connector
Net Weight: 0.6 oz
Colors: Beige or Black
Connector Types: Hardwired options for TA3F, TA4F, lockable 3.5mm, Hirose
Boom Flexibility: Bendable to 360°
Ear Placement: Left/Right
Included Accessories: Windscreen, cable clip, storage box
The CO-5W waterproof microphone is a durable earworn microphone with flexible boom designed
for vocal reinforcement. Moisture, sweat and stage makeup have met their match with the water
protected element of this microphone. This water, sweat, and makeup proof microphone defends
against all types of challenging stage and weather conditions. Sweating from humidity? Splashed by
seals? Drenched from rain? The CO-5W waterproof microphone will not let you down. The CO-5W
has an impressive Ingress Protection (IP) Rating of 57, whereas the first digit (5 of 6) references
particle protection, and the second digit (7 of 8) references liquid protection. The CO-5W water,
sweat, and makeup proof microphone has an omnidirectional polar pattern that allows a full 360
degree pick up of sound providing a natural blend of voice and ambience.
- XX C O N NECTO R OPT I O N S
-AK AKG, Audix -SE Sennheiser -SH Shure, Line 6
-AT Audio-Technica -MP MiPro -TX Telex
Water, Sweat, Makeup Proof125 dB max SPL
-XX C O L OR O P T ION
-BE Beige
SPECI F I CATI O N S
Element: Back Electret Condenser
Pattern: Omnidirectional
Frequency: 40Hz ~ 17kHz
Sensitivity: -47 dB 1V/Pa (Nominal Sensitivity ± 3dB at 1kHz)
Maximum SPL: 125 dB
Output Impedance: 2,000Ω ± 30% (at 1kHz)
Operating Voltage: 1.5V ~ 10VDC
Cable Length: 4ft. 2in. + connector
Net Weight: 0.6 oz
Colors: Beige
Connector Types: Hardwired options for TA3F, TA4F, lockable 3.5mm, Hirose
Boom Flexibility: Bendable to 20°
Ear Placement: Left/Right
Included Accessories: Windscreen, cable clip, storage box
The CO-3 microphone is our entry-level earworn microphone designed for speech
reinforcement for church liturgy, lecturing, and other applications that require good
quality vocal pick up in a hands-free environment. It has an omnidirectional polar
pattern which allows a full 360 degree pick up of sound providing a natural blend of
voice and ambience. The design of the CO-3 earworn microphone lends itself to
reduced speech produced "popping sounds", voice overloads in close mic
applications, and the convenient placement near the mouth greatly reduces noise
from wind and clothing. Its distinguishing clarity in close talk operation and
excellent gain before feedback make it suitable for applications where higher
degrees of speech intelligibility are desired.
- XX C O N NECTO R OPT I O N S
-AK AKG, Audix -SE Sennheiser -SH Shure, Line 6
-AT Audio-Technica -MP MiPro -TX Telex
-XX C O L OR O P T ION
SPECI F I CATI O N S
Element: Back Electret Condenser
Pattern: Omnidirectional
Frequency: 50Hz ~ 16kHz
Sensitivity: -44 dB 1V/Pa (Nominal Sensitivity ± 3dB at 1kHz)
Maximum SPL: 116 dB
Output Impedance: 1500Ω (at 1kHz)
Operating Voltage: 1.5V ~ 10VDC
Cable Length: 3ft. 11in. + connector
Net Weight: 0.28 oz
Colors: Beige or Black
Connector Types: Hardwired options for TA3F, TA4F, lockable 3.5mm, Hirose
Inspired by the fast-paced demands of live sound
productions, our proprietary Slider Clips “slide” on
quickly and easily for attaching to all types of
fabrics—even the thinnest, most delicate materials—
with a steadfast hold.
Dual In-Ear Intercom Headset with Condenser Noise-Cancelling Boom Microphone
The CM-i5 is the latest addition to the company’s radically new and patented line of in-ear
headsets. The CM-i5 includes a slimmer, lighter noise-cancelling condenser (requires bias
power) microphone designed for clarity and all-day wearing comfort. The
new headset is among the world’s only modular in-ear headsets offering
a revolutionary combination of in-ear performance, lightweight comfort
and earphone modularity. The robust feature set makes the headset ideal
for broadcast and production teams who rely vitally on the ability to hear
clearly—and react quickly in order to capture live action shots.
Earphone Specifications
Speaker type: Single driver ported
Sensitivity: 120dB SPL@1VRMS
(at 1 kHz)
Impedance: 32Ω
Color: Silver housing with gold band,
Equipped with 4-pin female XLR for all Clear-Com compatible systems
Equipped with 4-pin male XLR for RTS mono systems
Equipped with 5-pin female XLR for Telex systems
Equipped with 5-pin male XLR for all stereo RTS systems
Equipped with 3.5mm TRRS plug for iPhone and iPad intercom apps
Optional cable adapters available in a variety of connectors (see page 24.)
Dual In-Ear Intercom Headset with Dynamic Noise-Cancelling Boom Microphone
The CM-i3 Intercom Headset’s one-of-a-kind design utilizes in-earphones for lightweight
comfort and to provide excellent noise isolation in moderate to high noise environments. This
patent protected slim-line design allows for incredible ease in switching between three listening
modes: left, right, or left and right, to create the desired audio mix. The in-earphones are
modular for convenient service replacement or to personalize with your own earphones. At a
weight of only 2 ounces, it is a mere fraction of other binaural headsets.
Earphone Specifications
Speaker type: Single driver ported
Sensitivity: 120dB SPL@1VRMS
(at 1 kHz)
Impedance: 32Ω
Color: Silver housing with gold band,
Equipped with 4-pin female XLR for all Clear-Com compatible systems
Equipped with 4-pin male XLR for RTS mono systems
Equipped with 5-pin female XLR for Telex systems
Equipped with 5-pin male XLR for all stereo RTS systems
Equipped with 3.5mm TRRS plug for iPhone and iPad intercom apps
Optional cable adapters available in a variety of connectors (see page 24.)