You have acquired the SENSORO TRAVELLER/TRAVELLER+,
the cordless radar/laser detector from PNI Corporation.
The SENSORO TRAVELLER/TRAVELLER+ incorporates the
advanced new antenna technology and extremely low powerconsuming circuitry to ensure top-class performance and
satisfactory battery power management.
Features
• PROTECTION against all radar bands (X, K, and superwide Ka)
• 360° LASERCOVERAGE against all laser guns
• INVISIBLEto all radar detector sensing devices (VG-2 and
Spectre)
• THREESEPARATECITYMODES (C, C2, and C3) in addition
to highway mode to virtually eliminate false radar alerts
• ADDITIONALCITYMODE (C4) to delete X-band reports
and eliminate most false radar alerts
• USERSELECTABLE brightness and mute on/off
• SEPARATEPOWER on/off button and volume control wheel
• LED -BAC KLIT text display
• TUTORIALM ODE to demonstrate operations
• MEMORYto retain previously set operational modes after
power-off
• CORDLESSPOWER connection (two AA batteries included)
• CORDEDPOWER connection into 12-volt car lighter socket
(power cord included)
1
PACKAGE CONTENTS
Your SENSORO TRAVELLER/TRAVELLER+ package includes
the following components:
• The SENSORO TRAVELLER/TRAVELLER+ cordless radar/
laser detector
• Two AA batteries
• Coiled 12-volt DC power cord
• Windshield mounting bracket with suction cups (two each)
and bumper
• Dashboard mounting hook and loop fasteners (two each)
• Operation manual
SENSORO TRAVELLER+ package also includes the following
component:
• Dual socket 12-volt DC adapter for additional installations
to your vehicle’s fuse panel
2
IDENTIFYING PARTS OF THE UNIT
Top Laser Receiver
Mounting Guide
POWER Button
CITY Button
MUTE Button
Top
Back
DIM Button
Radar Receiver
Front Laser Receiver
LED Display
Front
3
IDENTIFYING PARTS OF THE UNIT
Power Cord Input Jack
Mounting Slots
Right Side
Left Side
Auxiliary Audio Jack
Volume Control Thumb Wheel
Mounting Slots
Mounting bracket
Power cord
Suction cups
Bumper
Hook and loop tape
Fuse
4
PRE-OPERATING INFORMATION
You can use the SENSORO TRAVELLER/TRAVELLER+
with your hands-free ear piece or amplied speakers by
connecting your ear piece or speakers to the auxiliary
audio jack of the unit. You must have an ear piece or
speakers with a 2.5mm (1/10˝) plug. If you have an ear
piece or speakers with different sized plug, use a 2.5mm
adapter between the plug and the jack. Please note that we
do not provide ear pieces, speakers, or 2.5mm adapters.
The SENSORO TRAVELLER/TRAVELLER+ is designed to
operate on two AA alkaline or lithium batteries. To ensure
maximum performance, we advise that you should not use
other battery types. You may use AA alkaline rechargeable
batteries. However, the resulting battery life will vary.
Do not leave the SENSORO TRVELLER/TRAVELLER+
exposed to extreme heat like strong sunlight. It can
damage the unit and battery.
Battery installation
1. Remove the battery compartment door at the bottom of
the unit when the unit is powered off.
2. Remove any old batteries. (Both batteries must be replaced
at the same time.)
3. Press down two fresh AA alkaline or lithium batteries into
place, observing the polarity indication inside the battery
compartment.
4. Replace the battery compartment door.
5. Turn the unit on to verify correct battery installation.
5
PRE-OPERATING INFORMATION
Battery life
The SENSORO TRAVELLER/TRAVELLER+ can provide
approximately 50 hours of battery life from two AA alkaline
batteries. Battery life is affected by many variables like the
conditions and brand of battery, the ambient temperature,
the number and strength of engaged signals, the duration
of reported alerts, the user interface mode you select, etc.
The approximate battery life we quote is based on our aging
tests in a shielded laboratory. Your specic conditions and
the way you use the SENSORO TRAVELLER/TRAVELLER+
will result in different battery life.
Low battery life indication
The SENSORO TRAVELLER/TRAVELLER+ has a separate
low battery indication LED. It intermittently blinks with
warning alarms from the moment when there is about two to
four hours of remaining battery life.
Always keep the power cord (included in the package) in
the glove compartment of your vehicle and connect power
to the SENSORO TRAVELLER/TRAVELLER+ from your
vehicle until you replace old batteries. This way you can
drive with the SENSORO TRAVELLER/TRAVELLER+
always on.
6
PRE-OPERATING INFORMATION
Auto power-off
In the event that you forget to turn off the SENSORO
TRAVELLER/TRAVELLER+ when you leave your vehicle, the
SENSORO TRAVELLER/TRAVELLER+ has an automatic
power-off feature to conserve battery life. The SENSORO
TRAVELLER/TRAVELLER+ will automatically shut off when
no signals are detected for approximately one hour. An
obtrusive audio and visual warning will conrm that the
auto power-off is about to happen. You can cancel auto
power-off by pressing any button while the audio and visual
warning is being displayed.
Turn off the SENSORO TRAVELLER/TRAVELLER+
whenever you leave your vehicle. Even a weak signal
can cause the SENSORO TRAVELLER/TRAVELLER+ to
remain on and drain your batteries.
7
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.