Page 1
USER MANUAL
NIGHT LIGHT PNI ELF1000S
FOR BABIES ROOM
Page 2
2
Main components:
- Elf Night Light
- Recharging cradle
- 5V\1A adaptor
- User Manual
ON/OFF button:
Press once – the night light is on and keeps changing the colours (red /
green / blue)
Press twice – the night light will keep constant in one colour randomly
Press thrice – the night light will be off.
Caution:
The Elf night light can be turned on only if it is away from the
recharging cradle.
When the Elf night light is put onto the cradle with power supply, the
light will be off automatically.
ON/OFF button
LED indicator
DC jet
Page 3
3
Recharging mode:
Connecting the DC adaptor with the proper AC power supply
Connecting the other side of the DC adaptor to the recharging cradle
DC jet.
When putting the Elf night light onto the recharging cradle, there may
be three occasions.
A blue LED showing on the Elf night light body indicates the bad
contact between the recharging cradle and the Elf night light.
The blue and red LEDs keep flashing alternatively indicates the Elf
night light is being recharged properly.
A red LED on the Elf night light indicates the completion of the
recharging process.
Caution:
If the 5V DC adaptor is not connected with the power supply, the LEDs
will not be on.
Users are advised to recharge the Elf night light after first purchase
Page 4
Trouble
Reason
Solution
No light when pressing
the On / Off button
1. Out of battery
2. Not pressing the button
properly
1. Recharge the Elf Night
Light
2. Press the button again
LEDs are not on properly
when the Elf night light
is on the recharging
cradle.
1. Bad contact between
the Elf night light and the
recharging cradle
2. No connection
between the DC adaptor
and the recharging cradle
1. Please replace the Elf
night light on the
recharging cradle
2. Please well connect
between the DC adaptor
and the recharging cradle
The Elf night light is not
bright enough.
Low power of the battery
Recharge the Elf night
light.
Troubles-shooting:
Product specification:
ELF Night Light
Operating current
10-40mA±2mA
LED colours
Rosu/Verde/Albastru
Dimensions
128.8x96x50 mm
Weight
125 g
Baza de incarcare
Operating current
160mA±20mA
Recharging current
190mA±20mA
Dimensions
112.5x73.5x31.5mm
Weight
85 g
General
Operating temperature
0
0 - 80 C
Storage temperature
0
25 C
Operating ambient humidity
20%-80%RH
4
Page 5
Loading...