Plinius SA reference Brochure

THE HEART OF MUSICTHE HEART OF MUSIC
SA-REFERENCE
POWER AMPLIFIER
SA-REFERENCE
POWER AMPLIFIER
In 1992, PLINIUS released the SA250 Class A Amplifier. This amplifier was to become our reference standard, and one we compared to all our other products.
With the development of the PLINIUS Odeon, SB300 and SA201 it became apparent that the SA250 had been eclipsed as our reference product. We therefore set about correcting the imbalance. While we continue to champion our asymmetric approach to circuit design we have refined the operation of our output stage with by far the largest imrovement being in the high frequency performance. Along with other refinements we have managed to improve on the SA250, and exceed the new standard set by our other products. We are proud to announce that a new PLINIUS Reference has been created.
The PLINIUS Reference Amplifier has been designed specifically to work as a balanced monoblock, or a stereo amplifier. As a monoblock the SA-Reference will exceed 1000 Watts of pure balanced amplification.
In PLINIUS tradition, premium components have been used throughout. Class A operation is maintained to over 100 watts per channel while the 300 watt output capability in stereo mode is capable of directing and controlling the most demanding speaker systems.
The PLINIUS SA-Reference Amplifier embodies all that we have learned in the past few years and while modelled on the Classic SA look it has been given some aesthetic changes to bring it into line with our present styling.
Sonically the SA-Reference paints a seamless picture from the most tuneful and accurate bass to a sweet, extended and extremely believable top end.
All PLINIUS SA-Reference Amplifiers are hand built and each has an individual build number engraved on the front panel.
Specifications For Plinius SA-REFERENCE
Power:
300 watts continuous per channel into 8 Ohms 2 channel stereo mode 1000 watts continuous into 8 Ohms Balanced Mono Mode from 20Hz to 20kHz
Frequency Response:
20Hz to 20kHz 0dB at 1Hz and –3dB at 70kHz
Distortion:
Typically <0.05% THD at rated power
0.1% THD and IM worst case prior to clipping
Current Output:
100A short duration peak per channel Fuse protected
Rise Time:
Typically 5µS
Hum & Noise:
100dB below rated output 20Hz to 20kHz A-weighted
Input Impedance:
47,000 ohms
Gain on RCA Inputs:
32dB
Gain on balanced Inputs:
38dB
Dimensions:
Height: 275mm (10 3/4") Width: 510mm (20") Depth: 535mm (21") Weight: 57 kg (125lbs)
+0.2dB
Colour:
Available in silver or black
Plinius Audio Limited PO Box 1836, Palmerston North New Zealand
Ph +64 6 354 8583 Fax +64 6 354 8586 Email info@pliniusaudio.com
www.pliniusaudio.com
Loading...