Plantronics Voyager 6200 UC User Manual

Voyager 6200 UC

PLANTRONICS + POLYCOM. NOW TOGETHER AS

User Guide

Overview 3

Headset overview 3 USB Bluetooth adapter 3

Connect and pair 5

Connect to PC 5 Conﬁgure for media 5 Pair to mobile device 5 Pair USB adapter again 6

Load software 7

Charge 8

Check headset battery status 8

Fit 9

Replace eartips 9

The Basics 10

Power on/off 10 Adjust the volume 10 Play or pause audio 10 Track selection 10 Fast forward/rewind 10 Voice control 10 Make/Take/End Calls 10

Interact with Microsoft softphone 12

More Features 13

Select language 13 Noise canceling 13 Online indicator 13 Change headset settings 14 Recalibrate headset sound 14 Caller Announcement (mobile phone only) 14

Update

ﬁrmware 15

Headset recovery 15

Troubleshooting 16

Support 18

ANC

2x1x 3x

:02

Siri Google Assistant

1x 1x

Overview

Headset overview

LEDs

Mute

USB Bluetooth adapter

ANC Active Noise Canceling

Power

Play/pause*

Next track*

Previous track*

Bluetooth® pairing

Volume

Call button/Press to interact with Microsoft Teams (app required)

Voice control: Siri, Google Now™, Cortana

NOTE *Functionality varies by application. May not function with web-based apps.

Be safe

Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset.

To pair your headset and USB adapter again if it loses connection, put your headset and USB adapter into pair mode (for the USB adapter, press the Bluetooth pairing button for 4 seconds until the lights

ﬂash red and blue).

NOTE Adapter design may vary

Standard LEDs

USB LEDs What they mean

Flashing red and blue Pairing Solid blue Headset connected Flashing blue On a call Solid red Mute active Flashing purple Streaming media from computer

LEDs when Microsoft Teams* is detected

USB LEDs What they mean

Flashing red and blue Pairing Solid purple Headset connected Flashing blue On a call Solid red Mute active Pulsing purple Microsoft Teams notiﬁcation

NOTE *Requires Microsoft Teams application

00:0 2

Connect and pair

Connect to PC

Configure for media

Your Bluetooth USB adapter comes pre-paired to your headset.

1 Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.

2 The USB adapter LED ﬂashes and then turns solid to indicate the headset is connected to the USB

adapter. If you are wearing your headset you hear “PC connected” to indicate the connection has been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid.

3 OPTIONAL Load Plantronics Hub for Windows/Mac by visiting poly.com/software. This allows you

to customize your headset behavior through advanced settings and options.

Your USB Bluetooth adapter comes ready to take calls, but listening to music takes some additional configuration.

Windows

1 To conﬁgure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound

> Playback tab. Select Plantronics BT600, set it as the Default Device and click OK.

2 To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >

Communications tab and select the desired parameter. Mac

1 To conﬁgure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On

both the Input and Output tabs, select Plantronics BT600.

Pair to mobile device

1 To put your headset in pair mode, slide and hold the Power

until you hear "pairing" and the headset LEDs flash red and blue.

2 Activate Bluetooth on your phone and set it to search for new devices.

• iPhone Settings > Bluetooth > On*

• Android Settings > Bluetooth: On > Scan for devices*

switch away from the off position

NOTE *Menus may vary by device.

Select “PLT V6200 Series.” If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.

NOTE To enable caller name announcement, allow access to your contacts if your phone prompts

you.

NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously;

this includes the Bluetooth USB adapter.

Pair USB adapter again

1 Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your

computer to recognize it.

2 Put your headphones in pair mode. 3 Put your Bluetooth USB adapter into pair mode by gently pressing and holding the pair button

with a pen or paperclip until the Bluetooth USB adapter flashes red and blue.

Pairing is successful when you hear "pairing successful" and the Bluetooth USB adapter LED is solid blue.

+ 12 hidden pages