Plantronics Voyager 5200 Series User Manual

Voyager 5200 Series

Wireless Headset System

User Guide

Contents

What's in the box 3

Accessories 4

Headset Overview 5

Charge your headset 6

Check Battery Level 7
Low battery warnings 7

Use charge case 8

Fit 9
Pair your phone 10

Pair to mobile device 10
NFC pairing 10
Pair another device 10

The Basics 11

Make/Take/End Calls 11
VPA (Virtual Personal Assistant) 12
Mute 12
Mute on reminder* 12
Adjust the volume 12
Use Sensors 12
Pause or restart streaming audio 13

Advanced features 14

Voice alerts list 14
Adjust voice alert volume 14

Specifications 15

Firmware Update 16

Headset recovery 16

Troubleshooting 17

2

What's in the box

Headset

Eartips (S, M. L)

Micro USB cable

3

Accessories

Sold separately at plantronics.com/accessories.

Vehicle power

charger Eartips with foam covers

USB Bluetooth

adapter

Charge case

Wall charger

4

NFC

NFC

Headset Overview

Charge port

Call button

Bluetooth button (use when pairing a device)

Virtual Personal Assistant (VPA) button

Mute button

Volume buttons

Indicator light

Power button

Near Field Communication

5

Charge your headset

Your new headset has enough power to pair and make a few calls directly out of the box. It takes
approximately 90 minutes to fully charge the headset; the indicator light turns off once charging is
complete.
A micro USB cable is supplied to allow you to charge the headset with an AC wall charger (not
included) or through a PC's USB port. The PC must be powered on to charge via USB 2.0 or higher.

NOTE Always charge at near room temperatures; never charge battery at temperatures below 0°C

(32°F) or above 40°C (104°F).

6