Plantronics Voyager 3200 Series, Voyager 3200 UC User Manual

Voyager 3200 Series

Bluetooth Headset

User Guide

Contents

Headset overview 3

Be safe 3
Optional charge case overview 4

Charge 5

Check headset battery status 5
Use the charge case 6

Fit 7

Adjust the

Pair 8

Bluetooth pairing 8
NFC pairing 8
Pair mode 8

Load software 9

The Basics 10

Make/Take/End Calls 10
Voice control 11
Adjust the volume 11
Play or pause streaming audio 11
Use sensors 11

fit 7

More Features 13

Select language 13
Modify the answer/ignore voice commands 13
Use two phones 13
Change headset settings 13

Update

firmware 15

Headset recovery 15

Troubleshooting 16

Support 17

2

00:02

Headset overview

Bluetooth pair

Be safe

Near Field Communication (NFC) pair

Call

Play/Pause

Volume

Micro-USB charge port

Headset LED (indicator light)

Voice control (Siri, Google Now, Cortana)

Mute

Power

Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.

3

Optional charge case

overview

Charge case LEDs; indicates case/headset battery status

Charge case: Touch the icon to display the charge case battery status

Headset: Touch the icon to display the headset battery status

Micro-USB charge port

It takes 90 minutes to fully charge the charge case. When fully charged, the charge case provides
an extra 10 hours of battery life for the headset.

4

Charge

It takes 90 minutes to fully charge the headset. The indicator light turns off once charging is
complete.

TIP To reset the accuracy of the talk time prompt, deplete the headset battery then charge fully.

TIP To check the headset battery status, tap the Call button while wearing your headset or tap the

Voice button and say “check battery.”

Check headset battery

status

There are several ways to check your headset battery status.

1 Wearing the headset, tap the Call button and listen to the voice alert.
2 When not wearing the headset, tap the Call
3 Check Plantronics Hub home screen.

button and observe the headset LEDs.

5

Use the charge case

A fully charged case can supply an additional 10 hours of headset talk time. It takes 90 minutes to
fully charge the charge case. It takes 2 hours to fully charge the headset and charge case together.

IMPORTANT The charge case is placed in deep sleep mode after manufacturing to save power and

protect the battery. To wake-up the charge case, plug it into a power source for a minimum of 1
minute. The LED's flash when charging.

Check the charge case or headset battery status by touching/swiping either the case or headset
icons. The LEDs indicate the battery status.

Battery status LEDs for charge case and headset

Battery high

Battery medium

Battery low

Battery critical; Recharge case/headset

6