Plantronics P830-M User Manual

Getting started:

The Plantronics Calisto speakerphone is ready to use with your computer and Microsoft® Lync™.

1. Connect your speakerphone to the

computer. If this is the first time you are connecting, wait for the installation process to complete. Restart the computer if directed to do so.

Configuring Microsoft Lync to always route call audio to the speakerphone:

2. Click on the drop down on the right side

of the main Microsoft Lync window.

3. Select the Audio Device option.

4. Choose your Plantronics speakerphone

for Audio Device.

5. Check the Also Ring box for Secondary

Ringer and choose your PC speakers from the drop down menu if you would like them to ring for incoming calls.

6. In this screen you can also test and

adjust volumes.

7. Click Ok when finished.

Note: USB configuration settings are unique for each USB port. If you connect the speakerphone to a different port you will need to make these changes again to set behavior for that USB port.

Calisto® P830-M™ Quick Setup Guide

Welcome:

Using a Plantronics Calisto speakerphone for PC calls will deliver a simpler, more comfortable and better sounding audio experience than you could get using just

your computer’s internal microphone and

speaker.

©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Calisto and P830-M are trademarks or registered trademarks of Plantronics, Inc. Microsoft and Lync are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Published 01.11

Calisto P830-M Key Features:

 Seamlessly switches between calls

from PC, mobile and home landline

 Color display and touch sensitive keys

for intuitive visual call management

 Full duplex wideband audio support

and advanced noise cancellation

 User friendly Caller ID and call log

Making and Receiving Calls with Microsoft Lync

To MAKE a call:

To call an existing contact, click on the drop down next to their name (1) and select the number you would like to call (2).

You can also enter a phone number manually using the search box located at the top of the main Microsoft Lync screen (3).

When a call is placed, a call window will open and the audio will be routed to your speakerphone.

To RECEIVE a call:

When you receive a call, a notification window will appear in the lower right corner of your computer screen (4).

To answer the call, use the controls on your speakerphone or click on the call notification window (5).

To REDIRECT a call:

You can also redirect a call by clicking Redirect (6) and choosing one of the options given.

1 4 5 6 2