Plantronics P151N, P171N, P161, P171, P151 User Manual
Quick Start User Guide
Guide
d’Utilisation
pour la Mise en
Route Rapide
Guía Rapida para
el Usuario
Guia de Usuário
de Início Rápido
H151/N
H161/N
H171/N
H161N
P161N
H151N
P151N
DuoPro
TM
Family of
Headsets
H171
P171
ABOUT THE
DUOPRO FAMILY
OF HEADSETS
The DuoPro™ family of headsets is designed to meet
the needs of users who use headsets most of the day.
In summary:
1 Models 151 is an over-the-ear headset.
2 Model 151N is an over-the-ear headset using a
(N) noise-canceling microphone.
3 Models 161 and 161N are over-the-head headsets.
4 Models 171 and 171N are convertible over-the-head to
over-the-ear headsets.
5 Models P151, P151N, P161, P161N, P171, and P171N
are Polaris versions of the above headsets. Polaris applies
to most headset ready telephones. For compatibility
questions please call the Plantronics Technical Assistance
Center (TAC).
PORTUGUÉS ESPAÑOL FRANÇAIS ENGLISH
1
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÉS
2
Q
UICK START GUIDE
These numbers refer to the numbered illustrations in the
center of this guide. The center section may be pulled out
for easier reference and use.
1. Identify the Components
See reference number 1 on illustration
1.1 Cable to Quick Disconnect™
1.2 Pivot Pin
1.3 Headset Receiver, inside view
1.4 Replaceable Ear Cushion
1.5 Adjustable Headband for over-the-head headsets
1.6 Cable Stabilizer Notch
1.7 Pivot Pin Holder on headband, reverses direction
for left ear use
1.8 Earloop for over-the-ear headset, tail adjusts for
comfort.
1.9 Headset Receiver, outside view setup for right ear
1.10 Stabilizer Bars
1.11 Voice Tube Boom
1.12 Noise-Canceling Microphone Boom
Warning:
The headset receiver may retain dangerous objects,
e.g. pins, paper clips, staples. Care should be taken to
ensure the headset receiver is free of metallic objects.
PORTUGUÉS ESPAÑOL FRANÇAIS ENGLISH
3
2. The Convertible Process
(171 & 171N models only)
See reference number 2 on illustration
2.1 Assembling the Over-the-Ear Headset
2.2 Assembling the Over-the-Head Headset
3. Left Ear Conversion
See reference number 3 on illustration
3.1 To convert the headset for the left ear, first pull out the
front part of the microphone boom (on noise-canceling
models) then rotate it downward facing the opposite
direction. Voice tubes simply rotate.
3.2 Then rotate the headset receiver downward to the
opposite direction. It only rotates in one direction.
3.3 For over-the-ear headsets, place earloop on opposite
side of headset receiver. For over-the-head headsets,
remove cable from cable notch, rotate pivot pin holder
as shown and replace cable in cable notch.
4. Adjusting the headset
See reference number 4 on illustration
4.1 For over-the-ear models: To put on the headset, move
the earloop away from the receiver and place the earloop over your ear. This configuration allows further
boom control by adjusting the flexible earloop.
4.2 For over-the-head models: Adjust the headband length
so the stabilizer bars rest above your ears. If necessary,
to increase or decrease tension on your head, bend the
metal part of the headband inward or outward for
desired comfort.Push the receiver close to your ear
until it feels comfortable and you can hear the sound
from the telephone clearly.
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÉS
4
In both configurations, the end of the boom should
be placed a distance of two fingers from the corner
of your mouth.
5. Additional Features
5.1 Clothing Clip
The clothing clip keeps the headset properly seated and
free from the cord’s weight. Attach the clothing clip at a
comfortable level.
5.2 Quick Disconnect™ Connector
This feature allows you to place a call on hold and move
away from the phone without removing the headset.
When you separate the Quick Disconnect™, you place
an ongoing conversation on hold. It does not allow you to
pick up another call.
Before using your headset, join the Quick Disconnect™
to the mating coupling of the modular adapter cable.
To put your call on hold, grasp Quick Disconnect™,
as shown, and pull straight apart. To resume your
conversation, reconnect the two halves.
MAINTENANCE
Maintenance for Optimum Performance
■
Replace voice tube every six to nine months
■
Replace ear cushion every six months
■
Clean cable with a moist cloth once a month
PORTUGUÉS ESPAÑOL FRANÇAIS ENGLISH
5
TROUBLESHOOTING
Callers cannot hear me
■
For Voice Tube models 151, 161, or 171 determine if the
voice tube is clogged or positioned improperly. Plantronics
recommends replacing the voice tube every six to nine
months.
For a temporary solution to a clogged voice tube, gently
rinse warm water through the voice tube for a minute
then manually swing or shake it dry. Make sure the voice
tube is completely dry before reattaching.
■
For Noise-Canceling models 151N, 161N, or 171N
make sure the microphone is facing your mouth and
positioned properly.
■
Verify that the transmit volume control of the modular
adapter is set properly.
I cannot hear callers
■
Verify that the Quick Disconnect™ is connected.
■
Make sure the headset is positioned properly.
■
Make sure the modular adapter, if used, is installed
correctly.
■
Turn up the volume control on the modular adapter,
if used.
Fit is uncomfortable
■
For over-the-ear configurations, determine if the earloop
is properly positioned on your ear. For over-the-head
configurations, make sure the headband length is correct
so the stabilizer bars rest gently just above the ear.
■
Try all possible adjustments for the receiver in the overthe-ear or over-the-head configuration.
Loading...