Plantronics M20 UG Manual

GET TALKING
IN MINUTES

M20™ and M50™

TAKE A GOOD LOOK

CALL BUTTON

• Take a call or end it (1 tap)

• Redial (2 taps)

• Initiate phone’s voice-dialing

(2-second press until tone is heard)

• Reconnect lost Bluetooth connection

(1 tap if the headset doesn’t automatically
reconnect)

• Activate pairing mode after initial set up

(press until red/blue LED flashes)

• Activate multipoint (2-second press

while switching on power)

POWER SWITCH

• On (slide to reveal black)

• Off (slide to reveal red)

MICRO USB CHARGING PORT

• Use with the AC wall charger:

1 hour before first use
2 hours (100% charge)

• Do not use headset while charging

VOLUME BUTTONS

• Volume presets (1 tap per level change)

LED

• Charging (solid red)

• Low battery (3 red flashes at powering on)

• Pairing mode (repeating red/blue flashes)

Your headset may look
slightly different than the
illustration, but will still
work as described.

CONNECT TO YOUR PHONE

You can now make a call using your

PLT_ M50

“Pairing” is the set-up process of

introducing your headset to your
phone. Before using your headset
for the first time, you must pair it
with your Bluetooth-enabled phone.

"Multipoint" lets you pair this
headset with two phones so you
can answer a call from either phone.
You must activate multipoint before
pairing second phone.

1. READY

Activate the Bluetooth feature on
your phone, then get phone to add
/ search / discover new Bluetooth
devices.

Phones Have Different Menus to
Select From:

iPhone: Settings > General >

Bluetooth > On (starts the search
for devices)

BlackBerry® smartphone:
Settings/options > Bluetooth: On >
Search for devices

VIDEO TUTORIAL FOR USA:

www.plantronics.com/pairing

2. SET

First Time, Right Out of the Box:

Turn on the headset. The LED
flashes red/blue to indicate
pairing mode.

Activate Multipoint (for 2nd
phone):

While pressing Call button, turn on
the headset and continue pressing
Call button until LED flashes blue
twice. Repeat to turn off
multipoint.

Pair New or Second Phone:

3. CONNECT

Select “PLT_M20” or "PLT_M50"
from the list of Bluetooth devices
shown on your phone.

If phone asks for a passcode, enter
four zeros (0000). You may see

on screen.

****

Some phones also ask to confirm
headset connection after pairing.

Headset LED will stop flashing
red/blue once successfully
paired/connected.