BackBeat GO 600 Series
User Guide
Contents
Pair 3
Get Paired 3
Pair second device 3
Pair to Mac 3
Charge and
Charge 4
The basics 5
Headset overview 5
Power on/off 5
Play/pause music 5
Track selection 5
Activate voice assistant 5
Adjust the volume 5
Make/Take/End Calls 6
Mute 6
Find your headset 6
Support 7
fit 4
2
Pair
Get Paired
Pair second device
The first time you power on your headphones, the pairing process begins.
1 Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
• iPhone and Android Follow the voice-guided pairing instructions.
• Other phones Use your phone's menu to:
2 Activate Bluetooth
3 Select “PLT BB600 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.
1 Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
®
on your phone and set it to search for new devices.
Pair to Mac
2 Select “PLT BB600 Series” in your device's Bluetooth Settings.
If your Mac is Bluetooth enabled, you can pair your headset to it.
1 Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon). You
will hear "pairing" and the LEDs will flash red and blue.
2 On your Mac, choose Apple menu > System Preferences > Bluetooth.
3 Click Set Up New Device or "+", select "PLT BB600 series stereo" and follow the onscreen
instructions.
3
Charge and
fit
Charge
It takes up to 90 minutes to fully charge your headset. The LEDs turn off once charging is
complete.
TIP To check the headset battery status, tap the Call button while wearing your headset. Headset
must be in idle state.
Your headset has up to 18 hours of listening time.
4
BASS BOOST
BASS BOOST
The basics
Headset overview
Mute/unmute
Power on/off
Play/pause music
Track selection
Activate voice assistant
Volume up
Volume down
Play/pause music
Track forward
Track backward
Bluetooth pair button
Power on/off
Bass boost
Call button
Slide the switch to power on or off.
Tap the Play/pause button.
Press the Track forward or Track back buttons as desired.
NOTE Functionality varies by application. May not function with web-based apps.
If your smartphone has a voice-enabled assistant, press and hold the Call button for 2 seconds
and wait for the phone prompt.
Adjust the volume
To adjust the volume, tap the Volume up or Volume down button.
Adjust headset microphone volume (softphone)
Place a test softphone call and adjust softphone volume and PC sound volume accordingly.
5
Make/Take/End Calls
Answer or end a call
Tap the Call button or use your softphone.
Decline a call
Press and hold the Call button for 2 seconds.
Redial last outgoing call
Double-tap the Call button.
Mute
Find your headset
During a call, press the Volume up
and Volume down buttons. You hear "mute on/off."
Most headsets are found under car seats, in pockets or on a messy desk. For less obvious
locations, locate your headset by sending a tone to find it.
1 Download the Plantronics Hub app for iOS and Android by visiting plantronics.com/software.
2 Locate your lost headset by using Find MyHeadset within the Plantronics Hub app.
6
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
©
2018 Plantronics, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth, SIG, Inc. and any use of such marks by
Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.
Patents pending.
211818-06 (01.18)
Plantronics BV
Scorpius 171
2132 LR Hoofddorp
Netherlands
Loading...