Plantronics Freehand User Manual

User Guide

NEED MORE HELP?

CALL US!

Instead of driving back to

the store, call us for help on

pairing, fit or usage of your

new headset.

1-866-363-2583

®

2

Package Contents and Features

AC Charger 100 – 240V

Refer to separate Safety Guide before using headset.

note Never charge the battery where the temperature may fall below
32°F (0°C) or rise above 104°F (40°C). Do not use your headset while it is
connected to the charger.

CHARGING TIME

2.5 hours ............... Full charge

Red status light glows while

charging. Do not use until

fully charged.

One-Touch Button:

Power On/Off

Call Answer/End

Pairing Mode

Voice Dialing

Optional Earloop

(ts either ear)

LED Status Light

Connector

for Rechargeable

Li-ion Battery

3

Bluetooth wireless technology provides a way for devices, like headsets and
phones, to communicate with each other without wires. Pairing is the set-up
process of introducing your headset to your phone. Before using your headset
for the rst time, you must pair it with your Bluetooth-enabled phone.

Plantronics QuickPair™ Technology

To simplify the Bluetooth setup process, your new headset uses Plantronics
QuickPair technology. This process is shown on the next page.

• The rst time you turn your headset on, your headset

automatically enters pairing mode for 10 minutes.

•

Until you successfully pair your headset with a Bluetooth-enabled
phone, every time you turn it on it will enter pairing mode.

• To later pair to a new phone, with the headset off, press and

hold the One-Touch Button until the LED ashes red-blue, which
indicates pairing mode status .

Range (the distance between headset and phone)

• To maintain the connection, keep your headset within 33 feet of
your phone.

• For the least amount of interference place the headset and phone

on the same side of your body.

If you move too far from your phone and lose the Bluetooth connection:

•

the headset may reconnect automatically within 60 seconds when
you move closer to your phone (you will hear a low tone), OR

• you may have to tap the One-Touch Button to reconnect (you will

hear a low tone), OR

• if neither of the above options work, you may have to reconnect

to your headset using your phone’s Bluetooth menu.

What Is Bluetooth?

4

1

How to Pair Your Phone With Your Headset for the First Time

1 Turn on the Bluetooth feature on your phone.

For most phones, select Settings/Tools > Connections >
Bluetooth > On. See your phone’s user guide for more information.

2 Turn on the QuickPair feature of your headset.

Turn on your headset by pressing and holding the One-Touch Button
until the LED ashes blue, then alternately ashes red-blue.
If you don’t see these ashes, press and hold the One-Touch Button until
you see the red-blue ashes.

3 Set your Bluetooth phone to ‘discover’ to locate the headset.

This usually involves going to ‘setup,’ ‘connect,’ or ‘Bluetooth’ menu on
your phone and selecting the option to ‘discover’ or ‘add a device.’

4 Once available headsets are listed, select your headset

(FreeHand 1xx). If prompted for a passkey, enter 0000.

When pairing is successful, the status light on your headset glows blue.
Your phone will also conrm when pairing is complete.

Pairing Your Headset

32

4

SETTINGS

SETTINGS

Time and Date

Phone Settings

Bluetooth

Sound Settings

Net wor k Ser vi ces

Security

Reset Settings

BLUETOOTH

BLUETOOTH

Dis c o ver /

Search

BLUETOOTH

BLUETOOTH

FreeHand 1xx

PASSK EY

0000

Call Us with Questions 1-866-363-BLUE (2583)