Plantronics Explorer 260 User Manual
PLANTRONICS PULSAR™ 260
USER GUIDE
STEREO BLUETOOTH HEADSET
WELCOME
PACKAGE CONTENTS & FEATURES
This user guide provides instructions on the setup and usage of the Plantronics Pulsar™
260 Bluetooth
in your package.
For additional help, service or support information, refer to product warranty card or
Troubleshooting on page 9, or
®
Headset. Before getting started, please review the safety booklet included
visit www.plantronics.com.
TABLE OF CONTENTS
Package contents and features 3
Charging 4
Powering 4
Indicator lights 4
Pairing 5
Making/answering/ending calls 5
Wearing options 6
Powered speaker & stereo uses 6
Pod controls 7
Headset controls 8
Troubleshooting 9
System reset 9
Product specifi cations 10
Technical assistance 10
Regulatory Information 11
Warnings 12
Register your product online
Visit www.plantronics.com/productregistration to register your product online so that
we can provide you with the best possible service and technical support.
Pulsar 260 headset
Sound-isolating
earbuds
2.5mm plug
Stereo Bluetooth pod
2.5mm port
Detachable clip
Audio-out cable
Pod controls:
Power on/off/pairing
Microphone with call
control button
Mini-USB port
Indicator light
Power on/off/pairing
LanyardAC charger
Mute/play/pause
Volume up
Volume down
Track forward
Track back
2
| |
3
CHARGING
PAIRING
You must charge for 3 hours before fi rst use.
To charge, connect AC charger to pod mini-
USB socket.
Pod indicator light fl ashes red when charging
and changes to solid blue when fully charged.
POWERING ON/OFF
Press and hold power on/off switch for >2 seconds.
POD INDICATOR LIGHTS
Action
Charging
Fully charged Solid blue
Light
Flashes red
To pair pod with phone:
Begin with pod powered on.
1. Press and hold both the mute/play/
pause button and the power on/off/
pairing button simultaneously. When
the indicator light fl ashes red and
blue, release buttons.
2. While pod is fl ashing red and blue,
use the phone menu to search for
Bluetooth devices and select “260
Plantronics”.
3. When prompted for password, enter
0000.
Pod fl ashes blue when paired successfully.
For set up and pairing instructions with
Bluetooth devices other than mobile
phones, please consult your Bluetooth
device user guide.
1
2
M2500 Plantronics
260Plantronics
M3000 Plantronics
3
Enter
password
0000
MAKING/ANSWERING/ENDING CALLS
To make a call:
Dial on phone; call transfers
automatically to headset.
To answer or end a call:
Briefl y press call control
button on headset.
3 red flashes. =
Power/battery status
Pairing/connect Flashes red and blue
Bluetooth pod connected
to headset
4
| |
2 red flashes. =
1 red flash. =
Flashes blue
NOTE: Flashes red
when headset is
initially powered on.
To adjust volume:
Short press
pod for incremental change, hold
for continuous change.
or – buttons on
+
5
Loading...