Plantronics CS50-USB, CS60-USB User Manual

CS50-USB &
CS60-USB DECT™
WIRELESS
HEADSET SYSTEM

User Guide

HEADSET

FIG.1

2

4

DIAGRAMS

5

3

BASE UNIT

FIG.2

16

FIG.3

18

7 6

1

POWER SUPPLY

17

15

13

FIG.2.1

8

14

12

11
10

9

1

DIAGRAMS

EARLOOP

FIG.3.1

HEADBAND Available as an accessory.

FIG.3.2

2

DIAGRAMS

NECKBAND Available only as an accessory.

FIG.3.3

3

DIAGRAMS

LISTEN VOLUME ADJUST MUTE FEATURE

FIG.4.1

FIG.4.2

INSTALLING A REPLACEMENT BATTERY

FIG.5

4

WELCOME

CS50-USB/CS60-USB
Wireless Headset
System User Guide.

Thank you for selecting the CS50­USB/CS60-USB Wireless Headset
System from Plantronics.

The CS50-USB/CS60-USB offers
wireless, hands-free headset con­venience and long range work­space mobility.

This user guide provides instruc­tions on the installation and usage
of your system.

For safety and regulatory informa­tion, please refer to the separate
"Important Safety Information"
booklet. Detailed technical infor­mation and a copy of the
Declaration
of Conformity can be found at
www.plantronics.com/
documentation

www.plantronics.com

5

USAGE INSTRUCTIONS

DIAGRAM KEY

HEADSET
1

Microphone

2 Speaker
3 Talk Button
4 Volume/Mute Control
5 On-line Indicator
6 Charge Contacts
7 Battery Door

DESK CHARGER
8

AC Power Adapter

9 AC Power Adapter Port
10 Headset Docking Cradle
11 Charge Contacts
12 Status Indicator
13 Charge Indicator
14 Stand
15 Stand Pegs
16 Ringer Switch On/Off
17 USB Connector
18 Subscription button access hole

(paperclip required)

1. GETTING STARTED

To use your Plantronics CS50-USB/CS60-USB Headset System, please follow these
simple steps:

1. Install the hardware.

2. Install the software.

3. Charge your headset battery.

4. Choose your headset wearing style.

5. Carry out the initial set-up

INSTALLING THE CS50-USB/CS60-USB BASE UNIT

To install the base-unit, attach the stand by inserting the Stand Pegs into the locating
holes on the underside of the base unit. Connect to the USB connector shown in Fig.
2 on page 1 to a free USB port on your computer. A USB hub can be used but you
should ensure it can supply sufficient power (250mA) to charge the headset. This
will create the finished assembly (refer to Fig.3, page 1). Alternatively, the Velcro
strips included can be used to attach the base unit to a PC monitor. The optional AC
Power Adapter can be installed as shown in Fig. 2.1

6