Plantronics CALISTO P830-M, CALISTO P830 Quick Setup Manual

Getting started:

Follow the steps below to get call answer/end controls
with your Calisto speakerphone and Cisco® Unified
Personal Communicator.

1. Connect your speakerphone to the computer. If

this is the first time you are connecting, wait for
the installation process to complete.

2. To get call control features, please download the

latest version of Plantronics software at

plantronics.com/software.

Note: Check with your IT staff before installing
software on your computer.

Configuring Cisco Unified Personal Communicator to
always route call audio to the speakerphone:

3. Click File in the upper left corner of the Cisco

Unified Personal Communicator main screen.

4. Select Options. Then select Audio.

5. Select your Plantronics speakerphone as the

default device for Microphone and Speakers
option.

6. Now you can select which device plays your

incoming call alerts by selecting and option for
Ringtone. These sounds typically route through
your PC speakers, but can come through your
Plantronics speakerphone if you prefer.

7. In this screen you can also adjust Speakers and

Ringtone volume levels.

8. When you are finished adjusting volume levels,

click OK.

Note: USB configuration settings are unique for each USB
port. If you connect the speakerphone to a different port
you will need to make these changes again to set behavior
for that USB port.

Calisto® P830™ Quick Setup Guide

Welcome:

Using a Plantronics Calisto speakerphone
for PC calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just

your computer’s internal microphone and

speaker.

©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design , Calisto and P830 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other countries.
Published 10.11

3

Calisto P830 Key Features:

 Seamlessly switches between calls

from PC, mobile and home landline

 Color display and touch sensitive keys

for intuitive visual call management

 Full duplex wideband audio support

and advanced noise cancellation

 User friendly Caller ID and call log

4

4 5 5

6

8

Making and Receiving Calls with Cisco Unified Personal Communicator

To MAKE a call:

To call an existing contact, select the
contact you would like to call and click the
phone icon next to their name (1).

You can also enter a phone number
manually using the dial pad on the
speakerphone or the search box located
near the top of the Personal Communicator
screen (2).

When a call is placed, a call window will
open, and the audio will be routed to your
speakerphone.

To RECEIVE a call:

When you receive a call, a notification
window will appear in the lower right
corner of your computer screen (3).

To answer the call, use the controls on
your speakerphone or click the phone icon
on the call notification window (4).

©2011 Plantronics, Inc. All rights reserved, Plantronics, t he logo design, Calisto and P830 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other countries.
Published 10.11

4

1

2

3

4