Plantronics BBS User Manual [en, fr]

Download

Page 1

GET PAIRED

The rst time you power on your headphones, the pairing process begins.

Slide the power switch on. You hear "pairing" and the LEDs ash red and blue.

Activate Bluetooth on your phone and set it to search for new devices.

• iPhone Settings > Bluetooth > On*

• Android Settings > On > Scan for devices*

*Menus may vary by device.

Select “PLT_SLB.” If necessary, enter four zeros (0000) for the

passcode or accept the connection. Once successfully paired, you hear “pairing

successful” and the LEDs stop ashing.

HEADPHONE OVERVIEW

([ ])

Play/pause music

Tap the Play/pause

button.

Volume

Rotate the volume wheel

forward (+) or

backward (–) to control the volume.

Track selection

Tap the Forward button or Back button to control the track selection.

Open mic

Tap the red button to hear your natural surroundings.

Voice dial (smartphone)

If your smartphone has a voice-enabled assistant, press and hold the Call button

for 3 seconds

and wait for the phone prompt.

Answer a call

Choose:

• Put on the headset to answer call, or

•

Tap the Call button

End a call

Tap the Call button

to end current call.

Decline a call

Press and hold the Call

button for 2 seconds.

Mute

During a call, press the red button. You hear "mute on/o." While muted, taking o the headphones transfers the call to your phone.

Call back last call (smartphone)

To dial your last number you dialed, double-tap the Call

button.

CHARGE

It takes up to 2 hours to fully charge your headphones. The LEDs turn o once charging is complete.

To check the headphones battery status, tap the Call

Tip:

button must be in idle state.

Your headphones have up to 12 hours of listening time.

while wearing your headphones. Headphones

ADJUST THE FIT

Adjust the headphones for a comfortable t. Lengthen or shorten the band until it ts

comfortably.

Page 2

NEED MORE HELP?

Read the guides for setup, use and safety. For more help, don’t return to the store; nd a local phone support number at plantronics.com/support.

2014 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. iPhone is a trademark of Apple, Inc. All other trademarks are the property of their respective owners.

Patents: U.S. 5,712,453; 7,039,179; Patents pending. 200462-XX 11.14 MODEL ID: PITE14

PAIR SECOND DEVICE

Slide and hold the power button towards the Bluetooth icon until the LEDs ash red and blue.

Activate Bluetooth on your second device and follow steps 2 and step 3 in "Get Paired."

USE SENSORS

Smart sensors respond when you put on or take o your headphones.

Putting on your headphones will:

• Resume music

• Answer a call

Taking off your headphones will:

• Pause music (while music is playing)

• Transfer active call to phone

Disable sensors

To disable the sensors, hold both the Mute

buttons for more than 6 seconds until the

Call LED ashes purple then red. Repeat to reactivate; the LED ashes purple then blue.

and

HYBRID_MODE

When the battery is exhausted use your headphones with the provided 3.5 mm Apple cable.

Use the cable to:

• Adjust the volume with the (+) and (–) buttons.

• Play/pause music or answer/end a call with the button = single tap

• Track forward with the

• Track backward with the

• Activate Siri with the

button = double tap

button = triple tap

button = 3 second press

ENABLE HD VOICE

To enable HD voice (wideband), hold both the red button and Play/pause 6 seconds until the LEDs ashes purple. Repeat to disable.

HD voice functions properly when both devices support it.

buttons for more than

PAIR TO MAC

If your Mac is Bluetooth-enabled, you can pair your headset to it.

Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon).

On you mac, choose Apple menu > System Preferences.

Click Set Up New Device (+), select "PLT_SLB" and follow the onscreen instructions.

CUSTOMIZE

You can change the language and other settings by downloading Plantronics Hub for Windows and Mac at plantronics.com/software. You can also download the free mobile apps Plantronics Hub for iOS and Android.

Plantronics Hub enables you to:

• Change language (Plantronics Hub for Windows and Mac only)

• Receive rmware updates (Pla Windows and Mac only)

• Turn "mute o" voice alert on/o

• Turn smart sensors on/o

ntronics Hub for

GET STARTED

SUBLIME

Designed in Santa Cruz, California

Page 3

FCC statement

This device complies wit h pa rt 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

·These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communicati ons.

However, there is no guarantee that interference will not occur in a particular installation.

·If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encoura ge d to

try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and re ceiver.

—Connect the equipment into a n ou tlet on a circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

The measured SAR levels evaluated are in compliance with the FCC RF exposure guidelines.

Page 4

NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE

FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

IC Radiation Exposure Statement for Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est c onforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

NCC警語

低功率電波輻性電機管理辦法

第十二條

經型式認證合格之低功率射頻電機,非經許可,公司,商號或使用者均不得擅自變更頻率,加大功率或變更原設計之特性及功能。

第十四條

低功率射頻電機之使用不得影響飛航影響安全及干擾合法通信,經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信, 指一電信法規定作業之無線電通信低功率射頻電機需忍受合法通信或工業,科學及醫療用電波輻射性電機設備之干擾。